Tyson Mexican Original, Inc. v. Robinson Metal, Inc

CourtDistrict Court, W.D. Arkansas
DecidedApril 14, 2020
Docket5:20-cv-05011
StatusUnknown

This text of Tyson Mexican Original, Inc. v. Robinson Metal, Inc (Tyson Mexican Original, Inc. v. Robinson Metal, Inc) is published on Counsel Stack Legal Research, covering District Court, W.D. Arkansas primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Tyson Mexican Original, Inc. v. Robinson Metal, Inc, (W.D. Ark. 2020).

Opinion

IN THE UNITED STATES DISTRICT COURT WESTERN DISTRICT OF ARKANSAS FAYETTEVILLE DIVISION

TYSON MEXICAN ORIGINAL, INC. PLAINTIFF

V. CASE NO. 5:20-CV-05011

ROBINSON METAL, INC., d/b/a PRODUCT HANDLING CONCEPTS, f/k/a PHC3 HOLDINGS, LLC, f/k/a JDL3 HOLDINGS, LLC DEFENDANT

MEMORANDUM OPINION AND ORDER On March 11, 2020, the Court held a hearing on Defendant Robinson Metal, Inc., d/b/a Product Handling Concepts, f/k/a PHC3 Holdings, LLC, f/k/a JDL3 Holdings, LLC’s (“Robinson”) Motion to Dismiss for Lack of Personal Jurisdiction (Doc. 6). Robinson argued that it had no contacts with Arkansas and could not have anticipated being haled into Court in this forum. At the time of the hearing, the parties had thoroughly briefed the personal jurisdiction question following a period of jurisdictional discovery. See Docs. 22–27. The Court entertained oral argument from each side before denying the Motion from the bench. The following discussion explains the basis for the Court’s ruling. I. BACKGROUND Tyson filed its original Complaint (Doc. 3) in Washington County Circuit Court, and Robinson promptly removed the case to this Court, citing the federal diversity jurisdiction statute. The Complaint recounts how Tyson received a request in 2015 from one of its customers to develop a new type of taco shell called a “quesalupa.” From Tyson’s descriptions of the product, it was to consist of a quantity of melted cheese sandwiched between two tortillas that were crimped and sealed together to lock in the cheesy filling. In order to mass-produce the quesalupas, Tyson searched for a company that would agree to design and build a quesalupa-making machine that would be housed at Tyson’s food processing facility in Fayetteville, Arkansas. On July 26, 2016, Tyson found a designer/builder and entered into a contract entitled “Equipment Design, Production and Purchase Agreement” (“Agreement”) with a company identified in the Agreement as

“Product Handling Concepts, a JDL3 Holdings, LLC Company.” See Doc. 3, p. 16. The Court understands that JDL3 Holdings, LLC, was a Wisconsin-based limited liability company that formed in March of 2015. Public records confirm that the company was dissolved in March of 2017. Product Handling Concepts appears to have been the trade name under which JDL3 Holdings, LLC, was operating when it entered into the Agreement with Tyson in 2016 to design and build the quesalupa-making machine. According to a public document provided by Robinson, three days after Tyson and Product Handling Concepts signed the Agreement, another company called PHC3 Holdings, LLC (“PHC3”), registered to do business in the state of Minnesota. See Doc. 26-2. All of Tyson’s invoices for costs related to the design and construction of the

quesalupa-making machine originated from PHC3. By the same token, Tyson sent all of its payments to PHC3. Though the Court is still not clear exactly how Tyson went from doing business with JDL3 Holdings, LLC/Product Handling Concepts to doing business with PHC3, all parties agree that PHC3 was the entity that performed under the Agreement and was paid by Tyson in exchange for that performance. As for Robinson, the named Defendant in this lawsuit, it is a Wisconsin company that fabricates and sells metal. According to the Declaration of Darrell LaCrosse, one of Robinson’s co-owners, Robinson first heard about PHC3 through one of Robinson’s independent sales representatives named David Steichen. (Doc. 25, p 1). Steichen pitched to Robinson the idea for a start-up company that would design and build metal machines—using Robinson’s metals. Robinson’s co-owners thought the idea sounded promising. Id. at p. 2 (explaining that Robinson decided to invest in PHC3 “to help out a potential long-term customer” (emphasis added)). Less than a week after Tyson entered

into the Agreement, the limited liability company known as PHC3 was born and began performing under the Agreement using the trade name “Product Handling Concepts.” The undisputed facts show that PHC3 was formed with the full knowledge, leadership, and financial support of Robinson’s co-owners, Darrell LaCrosse and Todd Robinson. PHC3’s operating agreement was executed the same day the company registered to do business in Minnesota, see Docs. 25-2 & 26-2, and that document reveals that on the day of incorporation, Steichen (Robinson’s sales representative) was named PHC3’s President/CFO/Secretary; LaCrosse (Robinson’s co-owner) was appointed to PHC3’s Board of Governors; and an individual named Jim Livermore was named CEO. The operating agreement also identifies a second company, EGP Investments, LLC

(“EGP”), as possessing a 75% ownership interest in PHC3. Interestingly, EGP was registered with the state of Minnesota on the same day as PHC3. See Doc. 26-3. EGP was jointly owned by Steichen, Livermore, and a third company called LAROB, LLC— which was wholly owned by Robinson’s co-owners, LaCrosse and Robinson. See Doc. 25-1. LAROB, LLC, contributed $100,000 of start-up capital to PHC3 through a transfer of funds to EGP. (Doc. 25, p. 2). And since EGP owned a 75% interest in PHC3, Robinson’s co-owners consequently owned a share—albeit a minority share—of PHC3. (Doc. 27, p. 9). Important to the discussion here, however, is the fact that Robinson Metal, Inc., was never identified in the operating agreement as an owner of PHC3. Less than a year after the quesalupa machine-making venture was under way, Product Handling Concepts/PHC3 began delivering prototypes to Tyson for testing. Tyson maintains that by April of 2017, it was becoming clear that the machine was not working as promised. PHC3 was given time to fix the machine, and Tyson ordered spare

parts from PHC3 to make repairs in-house. All of these attempts failed, and momentum on the project ground to a halt. By the end of July of 2017, about a year after the parties entered into the Agreement, Tyson declared the venture to be a total failure and placed the defective machine and associated spare parts in storage. In the instant lawsuit, Tyson claims that it paid PHC3 $4,297,207.76 from July 2016 to April 2017 and incurred separate labor and materials costs totaling $104,788.76, as well as spare-parts costs in excess of $400,000. (Doc. 3, p. 8). Tyson seeks the recoupment of these funds as damages. The reason why the Defendant in this lawsuit is Robinson and not PHC3 goes to the heart of the dispute about personal jurisdiction. According to Robinson’s corporate

representative, who was deposed in connection with the jurisdictional discovery ordered by the Court, Robinson was the exclusive supplier of metal to PHC3. (Doc. 24-2, p. 90). At some point between the time the quesalupa machine failed and Tyson threatened legal action, Robinson became interested in purchasing PHC3. By March 9, 2018, Robinson and PHC3 were ready to sign an asset purchase agreement that carefully left out any of PHC3’s assets related to Tyson and specifically denied any assumption of liability as to the failed Agreement between PHC3 and Tyson. The asset purchase agreement was scheduled to close by March 31, 2018; however, on March 22, 2018, PHC3 received Tyson’s demand letter (Doc, 24-4), which stated in no uncertain terms that Tyson was contemplating legal action. Again, according to Robinson’s corporate witness, PHC3’s receipt of Tyson’s demand letter prompted a restructuring of the asset purchase deal “to avoid potential liability to flow into Robinson Metal.” (Doc. 24-2, p. 161). Robinson and PHC3 decided that EGP—the entity jointly owned by Steichen, Livermore, and LAROB,

LLC—would first “foreclose” on PHC3’s assets (with the exception of assets related to Tyson) and then deliver those assets to Robinson through an asset purchase agreement. See Docs. 24-1 & 24-3.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Patin v. Thoroughbred Power Boats Inc.
294 F.3d 640 (Fifth Circuit, 2002)
International Shoe Co. v. Washington
326 U.S. 310 (Supreme Court, 1945)
Wells Dairy, Inc. v. Food Movers International, Inc.
607 F.3d 515 (Eighth Circuit, 2010)
Pangaea, Inc. v. Flying Burrito LLC
647 F.3d 741 (Eighth Circuit, 2011)
Dever v. Hentzen Coatings
380 F.3d 1070 (Eighth Circuit, 2004)
Reed v. Armstrong Cork Co.
577 F. Supp. 246 (E.D. Arkansas, 1983)
Pratt v. Ballman-Cummings Furniture Co.
549 S.W.2d 270 (Supreme Court of Arkansas, 1977)
Swayze v. A.O. Smith Corp.
694 F. Supp. 619 (E.D. Arkansas, 1988)

Cite This Page — Counsel Stack

Bluebook (online)
Tyson Mexican Original, Inc. v. Robinson Metal, Inc, Counsel Stack Legal Research, https://law.counselstack.com/opinion/tyson-mexican-original-inc-v-robinson-metal-inc-arwd-2020.