State v. Kerr

712 P.2d 400, 1985 Alas. App. LEXIS 410
CourtCourt of Appeals of Alaska
DecidedDecember 27, 1985
DocketA-531
StatusPublished
Cited by9 cases

This text of 712 P.2d 400 (State v. Kerr) is published on Counsel Stack Legal Research, covering Court of Appeals of Alaska primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
State v. Kerr, 712 P.2d 400, 1985 Alas. App. LEXIS 410 (Ala. Ct. App. 1985).

Opinions

OPINION

SINGLETON, Judge.

The state has petitioned for review of an order suppressing Intoximeter results in forty-four cases of driving while intoxicated, AS 28.35.033. We find that we must remand these cases to the district court.

In Anchorage v. Serrano, 649 P.2d 256, 258 (Alaska App.1982), we concluded that due process “requires the prosecution to make reasonable efforts to preserve a breath sample or to take other steps to allow a defendant to verify the results of the breathalyzer test” in those cases in which it wishes to admit the results of a breath test.

The state subsequently began using the Intoximeter 3000 breath testing machine. In People v. Jones, 118 Misc.2d 687, 461 N.Y.S.2d 962 (Albany Cty.1983), the machine was described as follows:

The Intoximeter 3000 is a breath-testing device which utilizes infrared energy and electrical current to detect the presence of ethyl alcohol (ethanol) in the breath of a driver. The device, as are all breath-testing devices, is based upon Henry’s Law and, unlike the more common breath-testers such as the breathalyzer, upon the Beer-Lambert Law of Absorption.
The Intoximeter 3000 is equipped with an infrared energy source of nichrome (an alloy of nickel, chromium and iron) surrounding a ceramic core. An electric current passing through this source [402]*402causes two beams of infrared energy to be emitted in the direction of a two-chambered gas cell after reflecting off a colli-mating mirror. After traversing the gas cell, the infrared beams pass through a narrow band interference filter. This filter permits infrared energy with a wavelength ranging from 3.3 to 3.48 microns to pass through and strike a detector while at the same time blocking energy with wavelengths greater or lesser than that range. Thus the beam of energy striking the detector is modified so that it corresponds to one of the major absorption bands of ethyl alcohol.
The cell through which the infrared beams pass has two chambers. One, the reference cell, contains only room air. The other, the sample cell, contains during a test 900 cubic centimeters of the subject’s alveolar air. The device gives a reading of the amount of interfering substance in the subject’s breath by comparing the amount of infrared energy striking the detector after the two beams pass through the chambers, one through the sample cell, the other through the reference cell. Otherwise stated, the device compares the amount of infrared energy absorbed by the air from the lungs of the subject with the amount absorbed by the air from the room. If the ratio resulting from that reading (energy absorbed by the alveolar air/energy absorbed by the room air) is greater than one, there is present in the subject’s breath some substance which absorbs infrared radiation at 3.39 microns. The amount of interfering substance present is determined by the amount of infrared energy it absorbs. At this point it is impossible to conclude that the absorbing substance is ethyl alcohol because in addition to ethyl alcohol there are other substances which absorb radiation at 3.39 microns.
In order to enable the Intoximeter 3000 to give a specific reading for ethyl alcohol, another device is necessary. Thus the Intoximeter 3000, in addition to its infrared analysis of breath based on the Beer-Lambert Law of Absorption, also contains a semi-conductor (a Taguci sensor) by which it is able to distinguish ethyl alcohol from other substances which absorb infrared radiation in the area of 3.39 microns.
The Taguci sensor is a semi-conductor device the conductivity of which is influenced by the ambient air in the sample chamber. The conductivity of the semiconductor varies where there is present in that ambient air an oxidizible vapor such as ethyl alcohol or other hydrocarbon. Programmed into the memory of the computer that is mated to the Intox-imeter 3000 are the specific conductivity readings (in amperes) of the sensor when ethyl alcohol is present in the sample chamber at varying levels which correspond to the various blood-alcohol levels. These conductivity readings are predetermined empirically in the laboratory, and are specific for ethyl alcohol. Every other substance that absorbs infrared radiation at a wavelength of 3.39 microns produces a different current in the semiconductor. The computer incorporated into the device compares the outputs from the infrared sensor (amount of infrared energy absorbed) and the semiconductor (amperes of electrical current). If the semi-conductor reading does not correspond to that stored in the computer’s memory for the blood-alcohol level reported by the infrared sensor, an inter-ferent other than or in addition to ethyl alcohol is present in the subject’s breath. The computer performs a calculation to determine the difference between the reading for the blood-alcohol level reported by the infrared sensor.and the reading from the semi-conductor sensor, which difference automatically reduces the infrared reading by a corresponding amount. That adjusted amount is reported as the subject’s blood-alcohol level.
Operation of the Intoximeter 3000 is relatively simple and requires minimal operator intervention compared with more common breath-testing devices.
Each test commences with a twenty minute waiting period during which the [403]*403subject is observed to insure that he does not ingest any alcohol, regurgitate or vomit. The operator presses a “start” button and then follows the machine’s commands to enter his name and identification number and the subject’s name. Following the last entry, the machine automatically blanks and purges to remove any residual alcohol fumes and to take a baseline reading, which ought to read “.00.” The machine then commands the subject to blow into the breath tube until the machine indicates that a sufficient sample has been entered. The In-toximeter then reports the subject’s blood-alcohol content on its display and proceeds to purge and blank itself. The machine then automatically runs a test with a reference solution, the ethyl alcohol content of which has been previously certified by the State Police Laboratory. Following the test with the reference sample, the machine again purges itself. The operator then presses the “print” key, whereupon the information previously entered and the results of the subject’s test, the reference sample test and the blank tests, the latter two being control tests to assure that the machine is functioning properly, are printed along with the times that the tests took place. The operator thus is required merely to type certain minimal information on the machine’s keyboard; he does not have to handle ampules of chemicals nor turn dials and levers as with more common breath testing devices.
The machine automatically safeguards against any contaminants in the room air and contains fail-safe devices to abort if there are room temperature or electrical or voltage problems, which rarely occur.

Id. at 963-65 (footnotes omitted).

The Intoximeter was certified for use by Alaska law enforcement agencies by the state Department of Health and Social Services in 1983, after extensive testing by a chemist employed by the department, Mr. Everett Clary. Kerr and the other respondents in this case do not challenge the state’s certification of the Intoximeter 3000.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Swanson v. City & Borough of Juneau
784 P.2d 678 (Court of Appeals of Alaska, 1989)
Gundersen v. Municipality of Anchorage
762 P.2d 104 (Court of Appeals of Alaska, 1988)
Best v. Municipality of Anchorage
749 P.2d 375 (Court of Appeals of Alaska, 1988)
Ansay v. State
715 P.2d 1194 (Court of Appeals of Alaska, 1986)
Begley v. Municipality of Anchorage
711 P.2d 540 (Court of Appeals of Alaska, 1985)
State v. Kerr
712 P.2d 400 (Court of Appeals of Alaska, 1985)

Cite This Page — Counsel Stack

Bluebook (online)
712 P.2d 400, 1985 Alas. App. LEXIS 410, Counsel Stack Legal Research, https://law.counselstack.com/opinion/state-v-kerr-alaskactapp-1985.