Sonic Manufacturing Technologies, Inc. v. AAE Systems, Inc.

196 Cal. App. 4th 456, 126 Cal. Rptr. 3d 301, 2011 Cal. App. LEXIS 709
CourtCalifornia Court of Appeal
DecidedJune 9, 2011
DocketNo. H034953
StatusPublished
Cited by206 cases

This text of 196 Cal. App. 4th 456 (Sonic Manufacturing Technologies, Inc. v. AAE Systems, Inc.) is published on Counsel Stack Legal Research, covering California Court of Appeal primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Sonic Manufacturing Technologies, Inc. v. AAE Systems, Inc., 196 Cal. App. 4th 456, 126 Cal. Rptr. 3d 301, 2011 Cal. App. LEXIS 709 (Cal. Ct. App. 2011).

Opinion

Opinion

PREMO, J.

Plaintiff Sonic Manufacturing Technologies, Inc., sued defendant AAE Systems, Inc., for breach of contract, and defendant cross-complained against plaintiff for breach of the same contract. After a court trial, the trial court found in favor of plaintiff on the complaint and cross-complaint. It entered judgment for $94,269.70. Defendant appeals from the judgment and contends that there is no substantial evidence in support of the trial court’s finding that it breached the contract. Plaintiff appeals from the judgment and contends that the trial court erred by finding that defendant did not breach the contract in another respect. We agree with defendant’s [458]*458contention and reject plaintiff’s contention. We therefore reverse the judgment with directions to enter judgment for defendant on the complaint.1

BACKGROUND

Plaintiff agreed to manufacture for and sell to defendant 500 modem cards. The contract, in the form of purchase order No. 0026667, dated April 3, 2006, provided that plaintiff would initially manufacture a “First Article” (five modem cards), “Submit First Article for approval,” and then “Receive release for production.” It then detailed: “After the First Article boards have been accepted, [defendant] will provide written approval and [plaintiff] may proceed with the manufacture of 100 boards, [f] Subsequent lots will be authorized in writing in lot sizes to be specified. [Defendant] will provide as much advance notice as possible for commencement of subsequent lots.” It also stated: “Factory Acceptance Test Reports are required to be approved in writing prior to shipping products.” The price for the cards was specified as $431.67 each and $215,835 for the total order of 500. The contract required plaintiff to deliver the modem cards to defendant’s place of business. Payment terms were “Net due 30 days.”2 The contract contemplated that defendant would supply plaintiff with some of the manufacturing materials and plaintiff would directly purchase some of the manufacturing materials. After entering the contract, certain materials that plaintiff was obligated to purchase were unavailable or had increased in price. The parties therefore agreed to increase the total purchase price for the 500 modem cards by $7,213.90 (approximately $14.43 each). On June 27, defendant issued purchase order No. 0026764 referencing one miscellaneous item at a cost of $7,213.90 stating: “This is the final PPV increase for PO# 26667.” The stated payment term was “Net due 30 days.” On June 27, plaintiff issued defendant a $7,213.90 invoice (No. 61650) for the purchase price variance (PPV). Plaintiff manufactured the First Article by September 19, 2006. The parties had agreed that defendant would set up a test station and perform testing of the First Article on plaintiff’s premises. Defendant’s engineers tested the First Article on September 22. On September 27, defendant notified plaintiff of certain problems and advised that when the “problem has been corrected and the boards updated, [defendant] will retest the boards to verify performance and the test fixture.” On October 11, plaintiff returned one modem card to defendant because it proved to be defective. The First Article thus consisted [459]*459of four modem cards.3 On October 19, plaintiff advised defendant that plaintiff was “looking to invoice for the materials we have bought and had here in stock for months now.” It gave defendant a summary of the materials and advised that it “would like to invoice the $153,834.65 that we have spent on the materials for these 500 boards. We would also like to be payed [szc] for the PPV charge of $7213.90, which was invoiced in May [szc] but has not been paid.”

Defendant approved the First Article on October 27 by advising plaintiff to “Please proceed with production of the first 100 boards.” Plaintiff completed manufacturing the remaining 96 modem cards by November 7. But the cards were defective because of a component supplied by defendant. Plaintiff so notified defendant. On November 14, plaintiff issued defendant a $14,880.15 materials invoice (No. 65469) for 45 modem cards regarding defendant’s purchase order No. 26667 and a $149,132.17 materials invoice (No. 64716) for 451 modem cards regarding defendant’s purchase order No. 26667. On December 8, defendant shipped to plaintiff 19 replacement components. On December 14, plaintiff advised defendant that the first five modem cards with the new component would be tested the next day and “Due to the no response from [defendant] on payment status our president has placed [defendant] on shipping hold.” On December 18, defendant shipped to plaintiff 77 replacement components and inquired why plaintiff invoiced it via No. 64716 for 451 modem cards when it was only shipping the initial 100 modem cards.

On January 30, 2007, defendant notified plaintiff that plaintiff was “in breach of contract by failing to provide the product described in purchase order number 0026667.” Defendant pointed out that it was not obligated to pay plaintiff until 30 days after delivery of the product. On January 31, plaintiff replied as follows: “Your assertion that [plaintiff] is in breach for failure to adhere to Net 30 terms is interesting given that [defendant] is on credit hold for failure to pay invoices within these terms (please refer to invoice 61650 for $7213.90 against your PO 0026764 that has remained unpaid since the invoice date of June 27, 2006). Repeated efforts to collect this debt have been ignored by [defendant]. Like every business entity, [plaintiff] reserves the right to grant and maintain credit terms based on customer ability to maintain their account in good standing. [Defendant] has not done this and has not been responsive to corrective action, [f] We wish to further advise that the failure to deliver product against PO 0026667 is responsive to matters other than [defendant’s] accounting performance. PO 0026667 required [defendant] to deliver components (consigned parts) and subsequent test equipment and procedures in support of the production schedule. The product in question cannot be built or tested without critical [460]*460items of [defendant’s] responsibility. [Plaintiff] has performed its required material procurement months ago and has been awaiting [defendant’s] materials which to date are still incomplete. [Defendant] has been grossly negligent and unreasonably delayed [plaintiff] in the performance of this PO, and it has not been for the ‘past month and a half or so.’ [Plaintiff] communicated in good faith on this situation since fall of 2006, and finally issued a material billing on November 14, 2006 when it became apparent that [defendant] was not clearing the credit hold or communicating toward any form of resolution.” On February 9, defendant cancelled the contract after acknowledging that plaintiff was “unwilling to deliver the product without our meeting payment demands which far exceed what is required of us under the terms of the contract.”

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Harris v. TAP Worldwide CA2/4
California Court of Appeal, 2025
Estate of Parks CA4/2
California Court of Appeal, 2023
Conservatorship of Parks CA4/2
California Court of Appeal, 2023
Argueta v. Worldwide Flight Services, Inc.
California Court of Appeal, 2023
Sanger v. Ahn CA1/1
California Court of Appeal, 2023
Lee v. Ryoo CA6
California Court of Appeal, 2023
Reynolds v. Palmbaum CA3
California Court of Appeal, 2023
Argueta v. Worldwide Flight Services CA2/8
California Court of Appeal, 2023
Young v. Hill CA2/3
California Court of Appeal, 2023
Baltazar v. Ace Parking Management CA4/1
California Court of Appeal, 2023
Garcia v. Harris CA4/1
California Court of Appeal, 2023
Marriage of Kimbrell CA4/1
California Court of Appeal, 2023
Mohammadi v. City of Fresno CA5
California Court of Appeal, 2023
In re F.M. CA1/2
California Court of Appeal, 2023
Citrus El Dorado v. Stearns Bank CA4/2
California Court of Appeal, 2023
Jones v. Capital Alliance Advisors CA6
California Court of Appeal, 2023
People v. Smith CA3
California Court of Appeal, 2023

Cite This Page — Counsel Stack

Bluebook (online)
196 Cal. App. 4th 456, 126 Cal. Rptr. 3d 301, 2011 Cal. App. LEXIS 709, Counsel Stack Legal Research, https://law.counselstack.com/opinion/sonic-manufacturing-technologies-inc-v-aae-systems-inc-calctapp-2011.