Simmons v. HEARTLAND WOOD PRODUCTS, INC.

355 S.W.3d 496, 2011 Mo. App. LEXIS 1634, 2011 WL 6130883
CourtMissouri Court of Appeals
DecidedDecember 9, 2011
DocketSD 30574
StatusPublished
Cited by1 cases

This text of 355 S.W.3d 496 (Simmons v. HEARTLAND WOOD PRODUCTS, INC.) is published on Counsel Stack Legal Research, covering Missouri Court of Appeals primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Simmons v. HEARTLAND WOOD PRODUCTS, INC., 355 S.W.3d 496, 2011 Mo. App. LEXIS 1634, 2011 WL 6130883 (Mo. Ct. App. 2011).

Opinion

GARY W. LYNCH, Judge.

Amanda Simmons, James Simmons, and Barbara Simmons 1 (collectively “Plaintiffs”) appeal the trial court’s judgment in their wrongful-death action entered after a jury verdict in favor of Heartland Wood Products, Inc. (“Heartland”). The jury assigned fault to both the decedent and the decedent’s father, absolving Heartland of *499 any liability in the decedent’s death as a result of a construction accident. Plaintiffs claim that the trial court erred by admitting a video re-enactment of the accident by Heartland because it was not substantially similar to the actual accident and refusing to give the jury two withdrawal instructions proffered by Plaintiffs. Finding no merit in either claim, we affirm.

Factual and Procedural Background. 2

Lance Simmons worked for Mid-State Builders & Overhead Doors (“Mid-State”), a business owned and operated by plaintiffs James and Barbara Simmons, Lance’s parents. Lance was part of a crew that was in the process of setting roof trusses on a building in Sikeston, Missouri, on February 13, 2006, when the truss upon which he was atop dropped out from under him and he fell, hitting his head on the concrete floor below. Lance died of his injuries the following day. In addition to his parents, he was also survived by his wife, plaintiff Amanda Simmons.

Plaintiffs filed a wrongful-death action against Heartland, the manufacturer of the truss. Plaintiffs alleged that the roof truss was designed, manufactured, sold, and distributed by Heartland and was defective in that the material used to manufacture the truss was of substandard strength and was not the wood designated in the design, facts which Plaintiffs alleged were known by Heartland. Plaintiffs brought five counts against Heartland: Count I — Negligence; Count II — Strict Liability (Product Defect); Count III — Strict Liability (Failure to Warn); Count IV — Negligently Supplying Dangerous Instrumentality; and Count V — Aggravating Circumstances.

Heartland denied all of Plaintiffs’ allegations. Heartland further raised numerous affirmative defenses, including failure to state a claim upon which relief can be granted; the doctrine of comparative fault; failure to use a product as reasonably anticipated; failure to use a product as intended; voluntary exposure to known danger; failure to appreciate danger in planned use of product; failure to undertake reasonable precautions; failure to follow manufacturer’s instructions and warnings regarding product use; failure to follow manufacturer’s instructions and warnings regarding installation of product; Heartland was a seller in the stream of commerce as defined by statute; product was altered after purchase in such a way as to sever Heartland’s potential liability; product was “state of the art” as defined by statute; James and Barbara Simmons, d/b/a Mid-State Builders & Overhead Doors, were liable as joint tort- *500 feasors for any liability assessed to Heartland because they failed to properly train and supervise the decedent in the use and installation of the product and failed to provide proper instructions, warnings, and safety precautions; the sole proximate cause of decedent’s injuries was the conduct of Plaintiffs and decedent; any hazards associated with the construction involved were open and obvious; and the statute of limitations. 3

At trial, James Simmons testified that, although he had never had any formal construction training, he had thirty-five years’ experience building houses, and he opened his construction business, Mid-State, in approximately 1995. At the time of the accident, Lance was a supervisor for Mid-State and had worked for his father’s company since he was twelve years old. Mid-State had done business with Heartland throughout the entire fifteen years of its existence, and James had done business with Heartland even before Mid-State’s founding.

According to James, once the foundation of a house is poured, someone from Heartland visits the worksite to measure for the necessary trusses. A truss generally consists of two parts: the outer edges, or “chords,” and internal braces, or “webs.” A designer for Heartland takes the field measurements and, using a computer program, determines how many trusses are necessary and the appropriate measurements and composition of each. A “picker” for Heartland next chooses the appropriate lumber and gives it to a “sawyer.” The sawyer cuts the wood to the correct specifications and gives it to a “fabricator,” who actually builds the trusses. The trusses are then delivered fully assembled to the worksite complete with a packet of materials, which includes installation and bracing diagrams as well as recommended safety precautions and warnings. According to James, he and his crewmembers did not regularly go over the packet of materials because they “have it memorized.”

The design created for the building in this case called for, in addition to other types, five “A2” trusses to be constructed using ten Dense Select Structural (“DSS”)-grade boards in their bottom chords. It was later determined that eight of the ten boards were, instead, number two southern yellow pine, a generally weaker type of wood. 4 Although they were marked as such, no one from Mid-State was aware of the disparity in wood as no one from Mid-State inspected the trusses before beginning installation.

On the day of the accident, James and another individual began separating the trusses while the other crewmembers began straightening the walls to prepare for installation of the trusses. Straightening the walls involves installing braces to hold the walls and overhang straight, and the braces are typically left on until plywood sheeting is installed. Once the walls are straight, the first truss is put into position using a crane, and two other crewmem-bers — in this ease, Nova Worley and Mike Boshell — nail the ends of the truss into the walls of the house. Each subsequent truss is first balanced by Lance attaching a board to the peak of the newly placed truss before it is nailed to the walls. On this particular occasion, Lance sat atop the *501 peak of the truss, while Boshell was along the back wall, and Worley was along the front wall. James was in the front yard of the house and did not see Lance fall; rather, James heard someone yell and, when he looked up, saw Lance falling from atop the truss. When James reached Lance, Lance “was on the ground, unconscious, spitting up blood[.]” Nova Worley had also fallen from the truss, but he was conscious and alert. While James testified that he saw the larger part of the broken truss still attached to the back wall, with the smaller part hanging from the front girder, there was other testimony that the entire truss had detached from the wall and fallen to the ground, with the attaching nails, now bent, still in the wall. Photographs showed the bent nails.

While the design called for the truss to be attached to the front wall using a two-ply girder, James testified that Mid-State only used a one-ply girder.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Rodgers v. State
355 S.W.3d 496 (Missouri Court of Appeals, 2011)

Cite This Page — Counsel Stack

Bluebook (online)
355 S.W.3d 496, 2011 Mo. App. LEXIS 1634, 2011 WL 6130883, Counsel Stack Legal Research, https://law.counselstack.com/opinion/simmons-v-heartland-wood-products-inc-moctapp-2011.