Rayonier Wood Products, L.L.C. v. Scanware, Inc. (In Re Scanware, Inc.)

411 B.R. 889, 2009 WL 2867903
CourtUnited States Bankruptcy Court, S.D. Georgia
DecidedFebruary 25, 2009
Docket19-10128
StatusPublished
Cited by10 cases

This text of 411 B.R. 889 (Rayonier Wood Products, L.L.C. v. Scanware, Inc. (In Re Scanware, Inc.)) is published on Counsel Stack Legal Research, covering United States Bankruptcy Court, S.D. Georgia primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Rayonier Wood Products, L.L.C. v. Scanware, Inc. (In Re Scanware, Inc.), 411 B.R. 889, 2009 WL 2867903 (Ga. 2009).

Opinion

MEMORANDUM AND ORDER ON PLAINTIFF’S MOTION FOR REMAND AND/OR FOR ABSTENTION AND ON DEFENDANT’S MOTION TO TRANSFER VENUE

LAMAR W. DAVIS, JR., Bankruptcy Judge.

FINDINGS OF FACT

Rayonier, a Delaware corporation with its principal place of business at 50 North Laura Street, Suite 1900, Jacksonville, Florida, operates a sawmill near Swains-boro in Emanuel County, Georgia. Complaint, Dckt.No. 9, Exhibit A, ¶ 1 (November 21, 2008); Debtor’s Answer, Dckt.No. 9, Exhibit C, ¶ 1; FinScan’s Answer and Cross Claim, Dckt.No. 9, Exhibit D, ¶ 1. FinScan, a Finnish company based in Es-poo, Finland, designs and manufactures real time image processing software, cameras, and interface boards which are used for grading lumber when combined with other related equipment and systems. FinScan sells its software and equipment to various third parties. Affidavit of Ja-akko Rihinen, Dckt.No. 10, Part 4, ¶2 (Dec. 22, 2008). Debtor, an Oregon corporation, purchases products from FinScan, Id., integrates them into stand-alone automated systems that Debtor builds, and sells this new system to lumber mills in order to grade lumber. See Motion to Remand, Dckt.No. 9, Exhibit A, pg. 14-17. Prior to acquiring a 100% ownership of Debtor in October 2007, FinScan held a minority interest in Debtor. Affidavit of Jaakko Rihinen, Dckt.No. 10. Part 4, ¶ 4.

In May 2006, Rayonier and Debtor entered into a contract (the “Contract”) under which Debtor was to provide Rayonier, at its wood products facility in Emanuel County, a Planermill Trimmer Optimization System (“System”), a system which was intended to perform better than 95% on grade performance pursuant to Southern Pine Inspection Bureau and Timber *892 Products Inspection rules. 1 Motion to Remand, Dckt. No. 9. Exhibit C, pg. 2, ¶ 15; Exhibit A, pg. 13 & 19. This Contract also provides a choice of law provision that any dispute arising under and in connection with the Contract shall be litigated before the courts of Emanuel County, Georgia. Specifically, it provides that Debtor and Rayonier agree:

1) “not to seek a change of venue;”
2) not “to dismiss the action on the grounds of forum non conviens” (sic); and
3) “not to remove any litigation from that court to federal court.”

Id., Exhibit A, pg. 26, ¶ 26. FinScan was not a signatory to the Contract and did not see the Contract until Rayonier served the summons and complaint upon FinScan in Finland in late September 2008. See Id., Exhibit A, pg. 22; Affidavit of Jaakko Rihinen, Dckt.No. 10, Part 4, ¶ 3. However, the Contract specifically identifies a FinScan product, the Boardmaster FS4NT software, and FinScan’s user manual for the software was given to Rayonier with the System. Motion to Remand, Dckt. No. 9, Exhibit A, pgs. 11 & 29.

On June 17, 2008, Rayonier filed a complaint in the Superior Court of Emanuel County, State of Georgia, against Debtor and FinScan. Rayonier claims that both defendants breached the Contract when the System failed to perform “better than 95% on grade performance pursuant to SPIB and TPI inspections.” Second, Ray-onier claims that both defendants breached the warranty located in paragraph 1.1 of the contract which warranted the System would perform in accordance with the intended use and specifications in the Contract. Third, Rayonier argues that it notified the defendants that the System was defective and failed to meet the specifications set forth in the contract, thus properly rejecting the defective goods. Last, Rayonier claims FinScan breached its express warranty provided in the BoardMas-ter-GS4NT and -FS4NT User’s Manual and also its implied warranty. Rayonier is asking for approximately $2 million in damages. Motion to Remand, Dekt.No. 9, Exhibit A.

Debtor has sold twenty-four lumber grading systems to lumber mills in North America. Three of those systems have generated claims: Rayonier, Interior Pac-tifie, Inc. (“Interior”) and Banks Lumber Co. (“Banks”). The latter two, each located in Oregon, are seeking $1 million in damages from Debtor. Affidavit of Herb Koenig, Dckt. No. 12, ¶ 4 (December 19, 2008).

Rayonier separately served Debtor in Oregon on August 8, 2008, and FinScan in Finland on September 29, 2008. Response, Dckt.No. 10, Part 1, pg. 6. Debtor filed its answer on September 15,2008. Motion to Remand, Dekt.No. 9. Exhibit C. FinScan separately filed its answer and filed a cross-claim for common law indemnity against Debtor on October 29, 2008. Id., Exhibit D. Thereafter, on October 29, Debtor filed Chapter 11 in the District of Oregon. Id., Exhibit E, and FinScan filed a Notice of Removal in this Court to remove the underlying state court case against both FinScan and Debtor pursuant to 28 U.S.C. § 1452(a). Notice, Dckt.No. 1, Part 2.

On November 21, 2008, Rayonier filed a motion to remand the underlying state court litigation to the Superior Court in *893 Emanuel County and/or for this Court to abstain from hearing the state court litigation. Motion to Remand, Dckt.No. 9. On December 19, 2008, Debtor filed a motion pursuant to 28 U.S.C. § 1412 and Federal Rule of Bankruptcy Procedure 7087 to transfer the venue of the removed action to the United States Bankruptcy Court for the District of Oregon, the court in which Debtor has filed its Chapter 11. Motion to Transfer Venue, Dckt.No. 11.

On December 12, 2008, in the Bankruptcy Court for the District of Oregon, the United States Trustee, Robert D. Miller, Jr. filed a Motion to Dismiss Debtor’s Chapter 11 or convert it to Chapter 7. He alleged that at the meeting of creditors on December 2, 2008, Tyrell B. Vance and Herbert Koenig, the President and Vice-President of Debtor for the two months prior to the meeting, testified as the representatives of Debtor. The Trustee states that the representatives “did not have sufficient knowledge and understanding of the debtor’s financial affairs, assets and liabilities to be able to fully answer questions arising from the debtor’s bankruptcy schedules and statement of financial affairs,” thus the meeting of creditors was continued to a later date. The Trustee also asserts that Debtor is not an operating business, its principal place of business was shut down pre-petition, its books, records and some miscellaneous office furniture and equipment are apparently located at the premises of its bookkeeper, Ken Davis, and at Mr. Vance’s personal residence, it has no employees other than Mr. Vance and Mr. Koenig, and its assets consist primarily of cash in bank accounts, accounts receivable, possible preferences and fraudulent transfers.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
411 B.R. 889, 2009 WL 2867903, Counsel Stack Legal Research, https://law.counselstack.com/opinion/rayonier-wood-products-llc-v-scanware-inc-in-re-scanware-inc-gasb-2009.