MPM Silicones, LLC v. Union Carbide Corp.

931 F. Supp. 2d 387, 2013 WL 1106731, 76 ERC (BNA) 1750, 2013 U.S. Dist. LEXIS 37064
CourtDistrict Court, N.D. New York
DecidedMarch 18, 2013
DocketNo. 1:11-CV-1542 (LEK/ATB)
StatusPublished
Cited by8 cases

This text of 931 F. Supp. 2d 387 (MPM Silicones, LLC v. Union Carbide Corp.) is published on Counsel Stack Legal Research, covering District Court, N.D. New York primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
MPM Silicones, LLC v. Union Carbide Corp., 931 F. Supp. 2d 387, 2013 WL 1106731, 76 ERC (BNA) 1750, 2013 U.S. Dist. LEXIS 37064 (N.D.N.Y. 2013).

Opinion

MEMORANDUM-DECISION and ORDER

LAWRENCE E. KAHN, District Judge.

I. INTRODUCTION

Plaintiff MPM Silicones, LLC (“Plaintiff’ or “MPM”), commenced this action on December 30, 2011, by filing a Complaint against Defendant Union Carbide Corporation (“Defendant” or “Union Carbide”) seeking to recover the costs Plaintiff incurred in identifying and responding to Defendant’s release of hazardous chemicals under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (“CERCLA”)1 as well as under several state-law causes of action. Dkt. No. 1 (“Complaint”) ¶¶ 1-2, 31-71.

Presently before the Court is Defendant’s Motion under Federal Rule of Civil Procedure 12(b)(6) to dismiss certain of Plaintiffs state-law causes of action as preempted by CERCLA and deficient under the applicable state law. Dkt. No. 23 (“Motion”). For the following reasons, the Court grants the Motion in part and denies the Motion in part.

II. BACKGROUND

A. Factual Background

For the purposes of deciding Defendant’s Motion to dismiss, the Court accepts as true the following facts taken from Plaintiffs Complaint.

Union Carbide is a New York corporation with its principal place of business in Houston, Texas. Compl. ¶ 4. In 1953, Union Carbide developed fifty acres of a 1,300-acre plot of farmland located near Sistersville, West Virginia (“the Sisters-ville Site” or “the Site”) for use as a chemical manufacturing facility. Id. ¶ 7-8. Over the approximately forty years that Union Carbide owned the Sistersville Site, Union Carbide used it to produce various chemical products, primarily silanes and silicones. Id. ¶ 9. In the manufacturing of these products, from approximately the 1950s through the 1970s, Union Carbide used hundreds of thousands of pounds of polychlorinated biphenyls (“PCBs”). Id. ¶ 11. Union Carbide disposed of the PCBs and other hazardous wastes used or produced during this period at several loca[391]*391tions within the Sistersville Site, including in unlined lagoons. Id.

In the late 1970s and early 1980s, Union Carbide conducted investigations of its historical waste-handling practices and its reporting obligations under newly enacted environmental laws such as the Resource Conservation and Recovery Act of 1976 (“RCRA”),2 the Toxic Substances Control Act (“TSCA”),3 and CERCLA. Id. ¶ 12. Through these investigations, which included PCB testing, Union Carbide determined that it had used hundreds of thousands of pounds of PCBs at the Sistersville Site. Id. ¶¶ 12-13. Union Carbide did not, however, disclose the presence and historical use of PCBs to federal regulators as it was required to do under CERCLA and under the RCRA as part of its Part B Permit application process, which began in approximately 1980 and extended throughout the decade. Id. ¶ 13.

Union Carbide was required to take certain corrective actions under its Part B Permit, including periodic groundwater monitoring and the development and maintenance of a number of Solid Waste Management Units (“SWMUs”). Id. ¶ 18. All of the hazardous waste in most of the SWMUs at the Sistersville Site was deposited there by Union Carbide alone. Id. ¶ 19. In addition, from 1979 until 1993, Union Carbide deposited solid waste from the Sistersville Site and from other facilities owned by Union Carbide in a landfill at the Site called Landfill No. 2. Id. That landfill is scheduled to be closed “in the near future.” Id.

Union Carbide sold the Sistersville Site in 1993. In 2006, after a series of further sales and mergers, the Site was acquired by MPM, a New York limited liability corporation with its principal place of business in Waterford, New York. Id. ¶¶ 3, 14. MPM has since incurred various costs associated with Union Carbide’s previous ownership and use of the Site. Id. ¶ 15. In connection with its effort to install a new wastewater treatment facility on the Sistersville Site, MPM sampled soils in the vicinity of Union Carbide’s former unlined lagoons and discovered high concentrations of PCBs. Id. ¶ 15. This soil sampling has caused MPM to incur hundreds of thousands of dollars in costs to date, and Union Carbide, the only entity to have used PCBs at the Sistersville Site, has declined to reimburse MPM for these costs. Id. ¶¶ 16-17. Union Carbide has also refused to contribute to the multimillion-dollar cost of closing Landfill No. 2 or to the cost of maintaining the SWMUs and conducting the necessary groundwater monitoring. Id. ¶¶ 19-20.

B. Procedural Background

Plaintiff filed a Complaint on December 30, 2011, seeking to recover the costs it incurred and expects to incur as a result of Union Carbide’s use of the Sistersville Site and its failure to meet its reporting requirements under federal and state law. Compl. The Complaint asserts nine causes of action styled as Counts I through IX. Id. ¶¶ 21-71. Counts I through III arise under CERCLA: Count I is for recovery of costs under § 107(a);4 Count II is for contribution under § 113(f);5 and Count III is for declaratory relief as to future costs under § 113(g)(2). Id. ¶¶ 21-30. Counts IV through IX arise under state law and are before the Court under its supplemental jurisdiction: Count IV is for negligence; Count V is for strict liabili[392]*392ty; Count VI is for restitution; Count VTI is for declaratory judgment as to future restitution; Count VIII is for indemnity and/or contribution; and Count IX is for private nuisance. Id. ¶¶ 31-71.

On April 16, 2012, Defendant filed a preanswer Motion under Federal Rule of Civil Procedure 12(b)(6). Mot. In its Motion, Defendant seeks to dismiss Counts VI through VIII because they are preempted by CERCLA; Count VIII on the additional ground that it is not ripe; and Counts VIII and IX on the additional ground that they are deficient under the applicable state law. Defendant’s Memorandum of law in support (Dkt. No. 23-1) (“Mem.”) at 2. Plaintiff filed a Response in opposition to the Motion on May 17, 2012, and Defendant filed a Reply to the Response on June 6, 2012. Dkt. Nos. 27 (“Response”), 28 (“Reply”).

On February 25, 2013, the Court issued an Order directing Plaintiff to file additional briefing addressing whether its CERCLA § 113(f) claim is barred by the Supreme Court’s decision in Cooper Industries, Inc. v. Aviall Services, Inc., 543 U.S. 157, 125 S.Ct. 577, 160 L.Ed.2d 548 (2004), and the Second Circuit’s decision in W.R. Grace & Co.-Conn. v. Zotos International Inc., 559 F.3d 85 (2009). Dkt. No. 34 (“the February Order”). Plaintiff complied with the February Order by filing a brief on March 4, 2013. Dkt. No. 35 (“Supplemental Brief’).

III. LEGAL STANDARD

When a court evaluates a motion to dismiss for failure to state a claim under Federal Rule of Civil Procedure

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
931 F. Supp. 2d 387, 2013 WL 1106731, 76 ERC (BNA) 1750, 2013 U.S. Dist. LEXIS 37064, Counsel Stack Legal Research, https://law.counselstack.com/opinion/mpm-silicones-llc-v-union-carbide-corp-nynd-2013.