Monique Roman v. Western Manufacturing, Inc.

691 F.3d 686, 2012 WL 3538486, 2012 U.S. App. LEXIS 17353
CourtCourt of Appeals for the Fifth Circuit
DecidedAugust 17, 2012
Docket10-31271
StatusPublished
Cited by68 cases

This text of 691 F.3d 686 (Monique Roman v. Western Manufacturing, Inc.) is published on Counsel Stack Legal Research, covering Court of Appeals for the Fifth Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Monique Roman v. Western Manufacturing, Inc., 691 F.3d 686, 2012 WL 3538486, 2012 U.S. App. LEXIS 17353 (5th Cir. 2012).

Opinion

LESLIE H. SOUTHWICK, Circuit Judge:

A jury found Western Manufacturing, Inc. liable to Dorel Roman under the Louisiana Products Liability Act for injuries caused by a defect that rendered one of its stucco pumps unreasonably dangerous. Western argues the expert testimony underlying Roman’s case was inadmissible under the Federal Rules of Evidence and insufficient under Louisiana law to sustain liability; it also argues the district court’s increase of the jury’s damage award violated the Seventh Amendment. Roman cross-appeals. We AFFIRM.

FACTUAL AND PROCEDURAL HISTORY

Western is a California corporation that produces the mobile Predator Pump for the commercial application of stucco. While working with one of these pumps on July 10, 2007, Dorel Roman sustained multiple bone fractures and extensive soft-tissue injuries when a high-pressure hose dislodged and struck his legs. The previous day, Roman had taken delivery of the pump and an accompanying high-pressure hose directly from Western’s manufacturing plant. The pump had been running less than 15 minutes on its first operation when the accident occurred.

Roman owned a stucco business. He received the stucco subcontract for a construction project. Roman had substantial experience using stucco pumps in his home country of Romania, in Germany, and in the United States where he had lived since 2001. On July 10, he transported the pump to the job site. He was accompanied by Michael Funk, an employee familiar with the Western brand of pumps. Funk was the nozzle operator performing the physical stucco application. The general contractor, Richard Delahoussaye, 1 was present during the pump set-up and visually inspected it prior to use. Roman testified that he read the instruction manual at least twice and that Funk also read it to ensure correct set-up and operation.

The Predator Pump consists of a diesel engine, a mixer for the stucco, a batch hopper, and the pumping mechanism, all mounted on a two-wheel trailer that can be hitched to a passenger truck. Its design is a positive displacement pump that pulls the slurry from the hopper into a thick 250 foot-long rubber hose for application. The pump must be primed and lubricated with water. The slurry is made with cement and water in the mixer, and then added to the hopper. A Cam-Lok fitting (a metal coupling) attaches to the pump’s manifold and secures the hose in place. The fitting becomes fully engaged and locked when both “arms or ears are pulled down”; those arms have two locking pins. Roman, Funk, and Delahoussaye all testified that they observed that the Cam-Lok was fully engaged and secured. At trial, Western argued that the jury should disbelieve this.

The pump’s key safety feature is a pressure relief valve (“PRV”). The valve consists of a brass port assembly that contains a red polyurethane ball. All the stucco travels across the valve, which is located next to the manifold with the hose. According to the operating manual in evidence:

The PRY is designed to protect the hose assembly from extreme pressures .... The ball will stay in place until enough pressure occurs that will cause the ball to blow out through the opening in the brass cap and release the pressure.

*691 Roman testified to standing 18 to 20 feet from the right side of the machine, which is the side with the hose. Funk began operating the pump and spraying stucco through the nozzle. Roman testified he • checked the stucco and was walking away from the pump when he heard a pop and fell to the ground. According to Funk, the slurry seemed to be flowing properly through the machine when he also heard that pop. Roman’s theory at trial was that the Cam-Lok ruptured under excessive pressure, causing the hose, which was attached to a piece of the metal Cam-Lok, to strike him.

The parties consented to have a magistrate judge preside over the jury trial. 2 The parties filed competing evidentiary motions in limine. Roman sought to exclude Western’s mechanical engineer Robert Gregory. Western sought exclusion of Roman’s liability and causation experts, Dr. Kurt Vandervort and Dr. Kenneth R. Riggs, and exclusion of an economist and a vocational specialist who gave opinions about future lost income. After an evidentiary hearing, the court denied the motions against the economist, the vocational specialist, and Dr. Vandervort, while reserving objections to Riggs for trial. During trial, Western reurged its motions as to Riggs and Vandervort. They were denied.

Trial commenced on September 20, and the jury returned its verdict ten days later. The jury found liability on one of two potential theories under the Louisiana Products Liability Act. It concluded that Western’s pump was defective in “construction or composition” but assigned no liability based upon a dangerous design. Responding to interrogatories, the jury found that although Roman had used the pump “in a reasonably anticipated manner,” he had also been negligent, such that 70 percent of the fault rested with him. It assigned Western the remaining 30 percent of fault by virtue of its pump’s defect. It awarded a total of $1,665,000 in damages, which netted Roman $499,500 when adjusted to reflect comparative fault. Damages were itemized by the jury across nine categories, including pain and suffering, past and future medical expenses, physical disability, and loss of life enjoyment.

Western’s renewed motion under Federal Rule of Civil Procedure 50 for judgment as a matter of law as to the construction/composition theory was denied. Roman’s first Rulé 50 motion came after the verdict. Over objection, the court granted a motion by Roman to amend the judgment, increasing the jury’s award of “past medical expenses” from $15,000 to $168,804.22.

Roman and Western both timely appeal. Western argues liability fails on the construction claim, while Roman argues that liability should also be imposed under the design defect theory. Each side also appeals the admission of the opposing party’s experts and challenges the jury’s apportionment of comparative fault. Finally, Western contends that the increase of damages violated the Seventh Amendment.

On January 7, 2011, soon after filing a notice of appeal, Roman died at age 33. Monique Roman, as administratrix of his estate, has been substituted as a party. 3 See Fed. R.App. P. 43(a). Our jurisdiction is based on the diversity of the parties; Roman is a Louisiana citizen and Western has its principal place of business in California and is incorporated there. • 28 U.S.C. § 1332(c)(1).

*692 DISCUSSION

When properly preserved, this court reviews a district court’s decision on a motion for judgment as a matter of law de novo. Goodner v. Hyundai Motor Co.,

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
691 F.3d 686, 2012 WL 3538486, 2012 U.S. App. LEXIS 17353, Counsel Stack Legal Research, https://law.counselstack.com/opinion/monique-roman-v-western-manufacturing-inc-ca5-2012.