OPINION
POGUE, Judge.
In this action, Plaintiff Mittal Steel Point Lisas Ltd. (“Mittal” or “Plaintiff’) seeks review of the final results of the second administrative review of the anti-dumping duty order on Carbon and Certain Alloy Steel Wire Rod from Trinidad & Tobago and the antidumping duty rate thereby imposed by the Department of Commerce (“Commerce”). Specifically, Plaintiff challenges (1) Commerce’s decision to treat certain wire rod as non-prime merchandise, thereby excluding the foreign sales thereof from its calculation of fair or normal value (“NV”) in Mittal’s home market, and (2) Commerce’s calculation of Mittal’s constructed export price (CEP) for Mittal’s U.S. sales, particularly the deduction of credit expenses for the time period between shipment from the port in Trinidad
&
Tobago and the date payment was received.
Pending before the court is Plaintiffs USCIT R. 56.2 motion for judgment on the agency record. For the reasons stated herein, Commerce’s determination regarding prime versus non-prime merchandise is affirmed, Commerce’s Consent Motion for Partial Voluntary Remand is granted so that Commerce may make further findings regarding Mittal’s CEP consistent with this opinion, and Plaintiffs Motion for Judgment on the Agency Record is denied.
Background
Mittal manufactures steel wire rod in Trinidad & Tobago, and sells such steel wire rod in its home market. Together with its North American affiliate and im
porter, Mittal Steel North America (“MSNA”),
Mittal also sells steel wire rod for export to the United States.
Following an investigation of Mittal’s sales, Commerce published an antidump-ing duty order on steel wire rod from Trinidad & Tobago in 2002.
See Carbon and Certain Alloy Steel Wire Rod from Brazil, Indonesia, Mexico, Moldova, Trinidad & Tobago, and Ukraine,
67 Fed.Reg. 65,945 (Dep’t Commerce Oct. 29, 2002)(no-tice of antidumping duty orders).
In due course, on November 16, 2005, Commerce published the final results of Mittal’s second administrative review,
which Mittal challenges in this case,
see Carbon and Certain Alloy Steel Wire Rod from Trinidad & Tobago,
70 Fed. Red. 69,512 (Dep’t Commerce Nov. 16, 2005)(no-tice of final results of antidumping duty administrative
review)(“ Final Results”).
These final results adopt and incorporate Commerce’s Issues and Decision Memorandum. Memorandum to Joseph A. Spe-trini from Stephen J. Claeys,
Issues and Decisions for the Final Results of the Second Administrative Review of the Anti-dumping Duty Order on Carbon and Certain Alloy Steel Wire Rod from Trinidad and Tobago,
(Dep’t Commerce Nov. 16, 2005), P.R. Doc. 62,
available at
http://ia. ita.doc.gov/frn/summary/trinidad/E5-6331-l.pdf
(“Decisions Mem.”).
1.
Production of prime wire rod
In its products’ price lists for customers in both Trinidad & Tobago and the United States, Mittal designates certain steel wire rod as “prime.” At the same time, Mittal also sells another steel wire rod product exclusively in Trinidad
&
Tobago that it designates in its price lists as “composite wire.”
See, e.g.,
Letter from Eric C. Emerson to the Hon. Carlos Gutierrez
Administrative Review of Antidumping Duty Order on Carbon and Certain Alloy Steel Wire Rod from Trinidad & Tobago: Caribbean Ispat Limited Response to Section A, B, C, and D Questionnaires
(Jan. 31, 2005), P.R. Doc. 16, C.R. Doc. 5 at 270, 283, Attachs. A. 13, A. 14
(“Questionnaire Response
”).
Commerce classifies Mittal’s composite wire as non-prime merchandise, a decision Mittal challenges in this action. At the
same time, the description of the production process for composite wire is not contested here. That process, however, and its differences from the production process for “prime”
wire rod, and the resultant price difference between the two types of merchandise, are relevant to a review of Commerce’s decision to treat composite wire as non-prime merchandise. In sum, the production process for composite wire produces a physical, though not chemical, difference in the resultant wire rod, and the physical difference provides a basis for the difference in price between prime wire rod and composite wire rod.
In its investigation of Mittal’s sales, Commerce determined that composite wire was not prime merchandise, and therefore Commerce excluded sales of composite wire in calculating the normal value of subject merchandise in the home country. In so doing, Commerce relied on Mittal’s price list, which distinguished between “Prime Wire Rods and Rebars” and “Composite (Wire Rods).”
See Decisions Mem.
at 9 (Cmt.4) (“we did not use the wire rod which was not identified as prime on [Mit-tal’s] price list for matching purposes”);
see also Questionnaire Response
P.R. Doc. 16, C.R. Doc. 5 at 270, 283, attachs. A.13, A.14.
2.
Calculation of Constructed Export Price
During the administrative review at issue here, Mittal reported its sales of wire rod to unaffiliated U.S. customers through MSNA. Both Commerce and Mit-tal considered these sales to qualify as constructed export price (“CEP”) sales under section 772(b) of the Act.
See Decisions Mem.
Mittal made these CEP sales to U.S. customers and shipped the merchandise to MSNA, which unloaded it and arranged for its delivery to the U.S. customers.
Id.
at 23-24, 245, attach. A.8. During the investigation, Mittal reported its expenses associated with making these sales, as well as those expenses associated with making sales in Trinidad & Tobago, for the purposes of adjusting CEP and NV.
See Id.
at 785-86, attach. B.14.
Specifically, in response to questionnaires, Mittal reported foreign inventory carrying costs, U.S. inventory carrying costs, and imputed credit expenses as information which provided a basis for price adjustments.
Id.; see also
Br. Supp. Pl.’s Mot. J. Agency. R. at 15
(“PI. ’s Br.”).
In reporting its imputed credit expenses for sales in the U.S., Mittal calculated the credit expense for a period commencing on the date Mittal invoiced the goods to the U.S. customer and ending on the date
Mittal received payment.
PL’s Br.
15. Commerce recalculated Mittal’s reported direct credit expenses and inventory carrying costs, considering the reported expenses to be inaccurate.
Decisions Mem.
at 4 (Cmt.2). Commerce determined that Mittal’s goods had not been warehoused in a bonded warehouse in the United States, and thus set to zero the U.S. inventory carrying costs reported by Mittal, reasoning that in the absence of warehousing in the United States, MSNA did not incur such inventory carrying costs. Commerce also recalculated credit expenses to begin accruing on the date of shipment from the foreign port. In so doing, Commerce stated that “[e]redit expense is the interest expense incurred ... between date of shipment of merchandise to a customer and date of receipt of payment from the customer.”
Id.
Jurisdiction and Standard of Review
This action is brought under 19 U.S.C. § 1516a.
Section 1677(9) grants Plaintiff standing to bring the action as an interested party that participated in the administrative proceedings below. 19 U.S.C. § 1677(9). The court has jurisdiction over the action pursuant to 28 U.S.C. § 1581(b).
The court’s review is to determine whether Commerce’s determinations, findings, or conclusions are supported by substantial evidence on the record, and otherwise in accordance with law. 19 U.S.C. § 1516a(b)(l)(B)(i).
Analysis
1.
Treatment of composite wire rod as non-prime merchandise
To identify the appropriate foreign like product for the purpose of determining NV of the subject merchandise, the Statute dictates that Commerce may first use data about “[t]he subject merchandise and other merchandise which is
identical
in physical characteristics with, and was produced in the same country by the same person as, that merchandise.” 19 U.S.C. § 1677(16)(A) (emphasis added).
Where non-prime merchandise is sold in the United States, Commerce matches it to non-prime merchandise sold abroad.
Corus Staal BV v. United States Dep’t of Commerce,
27 CIT 388, 405, 259 F.Supp.2d 1253, 1268 (2003);
see also Certain Corrosion-Resistant Carbon Steel Flat Products from the Republic of Korea,
71 Fed.Reg. 7,513 (Dep’t Commerce Feb. 13, 2006) (notice of final results of the eleventh administrative review), Mem. to David M. Spooner, Assistant Secretary, Import Administration from Stephen J. Claeys, Re:
Certain Corrosion-Resistant Carbon Steel Flat Products from the Republic of Korea
(Issues and Decisions for the Final Results of the 11th Admin. Review) at 23 (Cmt.13),
available at
http://ia.i ta.doc.gov/frn/summary/korea-south/E6-1984-l.pdf (excluding home market sales of non-prime merchandise from calculations where there were no sales of non-prime merchandise in the United States).
In this case, Commerce has interpreted the ambiguous term “identical” in making its determination. Specifically, Commerce has determined that rod labeled “composite wire rod” is not identical to “prime wire rod.” The Court of Appeals for the Federal Circuit has held that in section 1677(16)(A), Congress meant for “identical” to mean “closely alike or equivalent, rather than ‘being the same’ or ‘exactly equal and alike.’ ”
Pesquera Mares Aust-
rales Ltda. v. United States,
266 F.3d 1372, 1383 (Fed.Cir.2001). The Federal Circuit found the term “identical” ambiguous, and, reviewing Commerce’s interpretation, found it to be a reasonable interpretation, where “Commerce [ ] concluded that merchandise should be considered to be identical despite the existence of minor differences in physical characteristics, if those minor differences are not commercially significant.”
Id.
at 1384;
see also Chevron U.S.A. Inc. v. Natural Resources Defense Council, Inc.,
467 U.S. 837, 845, 104 S.Ct. 2778, 81 L.Ed.2d 694 (1984)(agency’s interpretation of an ambiguous term in statute reviewed for reasonableness). Thus, slight physical differences need not preclude merchandise from being considered prime merchandise. In
Pesquera Mares,
however, the differences “were not commercially significant.”
Pesquera Mares,
266 F.3d at 1384.
Faced with this legal landscape, Mittal argues that Commerce’s treatment of composite wire rod as non-prime is inconsistent with prior agency practice.
PI. ’s Br.
10. Mittal points to a previous Commerce determination treating as prime merchandise rolls of film that had a minor, physical difference from other “prime” merchandise.
Certain Polyethylene Terephthalate Film, Sheet and Strip from India,
70 Fed. Reg. 8072 (Dep’t Commerce Feb. 17, 2005) (final results of antidumping duty administrative review)(“PAT
Film”).
In
PET Film,
Commerce stated that the “sole reason for considering shorter rolls of PET film to be non-prime merchandise is that these rolls cannot be used by customers in normal production runs; hence, buyers consider shorter rolls of PET film to be less valuable than full rolls of PET film.”
PET Film,
Mem. to Joseph A. Spetrini, Acting Assistant Secretary, Import Administration from Barbara E. Tillman Re:
Certain Polyethylene Terephthalate Film, Sheet and Strip from India
(Issues and Decision Memorandum for the 2001-2003 Administrative Review), at 21-22 (Cmt.5)
available at
http://ia.ita.doc.gov/frn/ summary/india/E5-658-l.pdf. Yet, Commerce treated the shorter rolls as prime merchandise.
Id.
Thus, Mittal argues, where there is only one, minor physical difference
between prime wire rod and composite wire rod, composite wire rod should be considered prime merchandise.
Mittal fails to take into account the next sentence in Commerce’s
PET Film
decision, i.e., Commerce found “no evidence on the record ... that Jindal America consistently sold shorter rolls of PET film
at prices lower than that charged for full rolls of identical PET film.
...”
Id.
(emphasis added). In other words, in
PET Film,
the physical difference was slight enough that the merchandise could be considered identical because that difference did not result in a price difference. Presumably, such a price difference would distort the comparison of NV and CEP.
See, e.g., Certain Polyethylene Terephthalate Film, Sheet and Strip from India,
71 Fed. Reg. 47,485 (Dep’t Commerce Aug. 17, 2006) (final results of antidumping duty administrative review), Mem. to David M. Spooner, Assistant Secretary, Import Administration from Stephen J. Claeys Re:
Certain Polyethylene Terephthalate Film, Sheet and Strip from India
(Issues & Decision Mem. for the Final Results of the Administrative Review of the Antidumping Duty Order) at 5 (Cmt.4)
available at
htt p://ia.ita.doc.gov/frn/summary/india/E6-13592-l.pdf (“[g]iven the difference in the physical characteristics between prime and non-prime merchandise ... and the potential distortion resulting from comparing sales of prime merchandise in the U.S.
market to sales of non-prime merchandise sold in India, we continue to find that it was appropriate for [Commerce] to distinguish between [ ] sales of prime and non-prime merchandise.”). A distinction based on both the degree of physical difference and price difference follows the logic set forth in
Pesquera Mares
as well, that “identical” need not mean “exactly equal and alike” in cases where the differences are not commercially significant.
Pesquera Mares,
266 F.3d at 1384;
see also Stainless Steel Wire Rod from Korea
63 Fed.Reg. 40,404, 40,414 (Gen'l Cmt. 7)(Dep’t Commerce July 29, 1998)(notiee of final determination of sales at less than fair value) (finding that both “prime 1” and “prime 2” products should be considered as prime because “[Commerce] found no physical differences between the two prime products that would lead [it] to believe that prime 1 and prime 2 products are not comparable in price or cost.”)
Here, there is evidence on the record that the physical difference between prime and composite wire was commercially significant. Namely, as Mittal reports, there was a price difference between prime wire rod and composite wire rod.
Pl.’s Br.
8-9. This price difference, according to Mittal, was due to composite rod having a physical difference from prime wire rod, which is “the only physical distinction between composite rod and other prime rod”.
Id.
at 9.
This evidence, which is attested to by Mittal, is adequate to support the conclusion that composite wire rod is not “identical” to prime wire rod, and should therefore not be considered prime merchandise. Nor has Commerce applied the term inconsistently, because, in
PET Film,
the slight physical difference was not commercially significant. The court therefore affirms Commerce’s decision to treat composite wire rod as non-prime merchandise.
2.
Calculation of Inventory Carrying Costs and Credit Expenses
In cases where goods are sold in the U.S. through an affiliated company, the “U.S. Price” is constructed using the first sale to an unaffiliated entity.
See U.S. Steel Group v. United States,
22 CIT 670, 15 F.Supp.2d 892 (1998)(analyzing situations in which U.S. affiliate has sufficient involvement in a sale that use of CEP, rather than EP, is appropriate), rev’d and remanded on other grounds in
U.S. Steel Group v. United States,
225 F.3d 1284 (Fed.Cir.2000). Adjustments are made to NV and EP or CEP so that an “apples-to-apples” comparison can be made, at a “specific, ‘common’ point in the chain of commerce, so that value can be fairly compared on an equivalent basis.”
Micron Technology, Inc. v. United States,
243 F.3d 1301, 1303, 1313 (Fed.Cir.2001)(citing
Koyo Seiko Co. v. United States,
36 F.3d 1565, 1568 (Fed.Cir.1994)).
However, “[i] f the sale is classified as a CEP sale, additional deductions are taken from the sales price to arrive at the U.S. Price.”
AK Steel Corp.,
226 F.3d at 1364. This is because affiliated companies could manipulate their books to escape a determination of dumping:
[t]he risk is that an artificially low price may be charged to the affiliated distributor in the home market and an artificially high price charged to the affiliated distributor in the United States market. The consequence in each case is that a lower countervailing duty (or no duty at all) would be payable.
Micron Technology,
243 F.3d at 1303.
The additional deductions from CEP are set out in 19 U.S.C. § 1677a(d), and in-
elude costs of sale, such as “expenses that result from, and bear a direct relationship to, the sale, such as credit expenses, guarantees and warranties.” 19 U.S.C. § 1677a (d)(1)(B).
The purpose of these additional adjustments to the CEP is “to prevent foreign producers from competing unfairly in the United States market by inflating the U.S. price with amounts spent by the U.S. affiliate on marketing and selling the products in the United States.”
AK Steel Corp.,
226 F.3d at 1367.
The deductions at issue in this case include both inventory carrying costs, which represent the cost of keeping a product in inventory until it is sold, and credit expenses, which represent the opportunity cost of money owed to the producer between the date of sale and the date payment is received.
The date that merchandise is considered to be shipped to the customer is significant in determining how long the carrying costs were borne by the seller, while the date of sale is significant in determining the starting point of the period for which credit expenses are calculated. As discussed further, below, the date the merchandise is shipped to the customer is sometimes taken as the date of sale. A later date of sale results in smaller deductions from the CEP for credit expenses, although it can increase the period during which carrying costs are incurred.
Whether goods are shipped to the unaffiliated customers directly from the foreign port or whether they are warehoused in the United States is important to the determination of when credit expenses begin accruing, and whether there are U.S. carrying costs. If goods are warehoused in the U.S., the date of sale will not occur until after the merchandise is in the United States,
Brake Drums and Brake Rotors from the People’s Republic of China,
61 Fed.Reg. 53,190, 53,195 (Dep’t Commerce Oct. 10, 1996) (notice of preliminary determinations of sales at less than fair value and postponement of final determinations), and thus the clock for credit expenses won’t start running until then.
A.
Credit Expenses
As noted above, credit expenses are the costs associated with money being owed to the seller after it has sold its merchandise to the customer but has not been paid. Determining the date of sale of the merchandise is therefore critical to calculating this cost. In its regulations, Commerce states that:
[i]n identifying the date of sale ... the Secretary normally will use the date of invoice.... However, the Secretary may use a date other than the date of invoice if the Secretary is satisfied that a different date better reflects the date on
which the exporter or producer establishes the material terms of sale.
19 C.F.R. § 351.401(i)(2005). The use of a uniform date of sale (namely, the date of invoice) is to achieve both efficiency and predictability. Preamble to the Dept.’s Final Regs, at 19 C.F.R. parts 351, 353 and 355, 62 Fed.Reg. 27,296, 27,348 (Dep’t Commerce May 19, 1997) (final rule)
(“Preamble”).
Also in this Preamble to Commerce’s regulations, in rejecting suggestions that it use the date of shipment rather than the date of invoice as the date of sale, Commerce gave the following reasons:
First, date of shipment is not among the possible dates of sale specified in note 8 of the AD Agreement. Second, based on the Department’s experience, date of shipment rarely represents the date on which the material terms of sale are established. Third, unlike invoices, which can usually be tied to a company’s books and records, firms rarely use shipment documents as the basis for preparation of financial reports. Thus, reliance on date of shipment would make verification more difficult.
Id.
at 27,349. Commerce thereby states that the date of shipment should not normally be used as the date of sale, and that the date of sale determination depends on the date when material terms of sale are established. Nevertheless, it is Commerce’s practice to use the date of shipment as the date of sale when the date of invoice is after the date of shipment.
See, e.g., Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products from Brazil,
64 Fed.Reg. 38,756, 38,768 (Dep’t Commerce July 19, 1999) (notice of final determination of sales at less than fair value)(“The Department does not consider dates subsequent to the date of shipment from the factory as appropriate for date of sale.”) (emphasis in original)
{“Steel Products from Brazil”)-, see also Stainless Steel Bar from Japan
65 Fed.Reg. 13,717 (Dep’t Commerce Mar. 14, 2000) (final results of antidumping administrative review), Mem. to Robert S. LaRussa, Assistant Secretary, Import Administration from Richard W. Moreland Re:
Issues and Decisions Mem. For the Administrative Review of Stainless Steel Bar from Japan (Cmt.l) available at
http://ia.ita.doc. gov/frn/summary/japan/00-6264-l.txt (“In keeping with the Department’s practice, the date of sale cannot occur after the date of shipment”). In
Steel Products from Brazil,
Commerce explained that “[t]he Department considers the date of sale to be the date on which all substantive terms of sale are agreed upon by the parties.”
Steel Products from Brazil,
64 Fed.Reg. at 38,768. The reason for Commerce’s practice regarding the use of date of shipment is that when a party ships its product to a customer, it is reasonable to assume that the material terms of the sale have been established.
Id.
Thus, Commerce has adopted a practice of calculating the date of sale to be the date of invoice, unless the date of shipment is earlier. This is in contradiction to Commerce’s statement in the preamble that “date of shipment rarely represents the date on which the material terms of sale are established.”
Preamble,
62 Fed.Reg. at 27,349. Nonetheless, using the date of shipment when that date is before the invoice date is a practice the Department has adhered to in other investigations, and which has been implicitly approved by the courts.
See AIMCOR v. United States.,
141 F.3d 1098, 1104-05 (Fed.Cir.1998)(citing
AIMCOR v. United States,
19 CIT 966, 972 (1995) (“Commerce’s established practice is to calculate credit expenses from the date of shipment to the date payment is received from the customer.”)). Commerce’s reasoning therefore seems to be that shipment to the customer does not occur before the materi
al terms of sale have been determined, so that when invoicing is subsequent to shipment, the date of shipment is generally an appropriate date of sale, although depending on the facts of specific review, Commerce may find another date more appropriate.
It is also the case that in instances where a U.S. affiliate warehouses merchandise in the United States and sells from inventory, Commerce only starts the credit expense “clock” running from the date merchandise is shipped from the U.S. warehouse.
Stainless Steel Butt-Weld Pipe Fittings from Taiwan,
63 Fed.Reg. 67,855, 67,856 (Dep’t Commerce Dec. 9, 1998) (final results of antidumping duty administrative review). In such cases, the sale does not occur before merchandise enters the country. Here, on the other hand, Commerce has determined that this is not an instance where merchandise was shipped into the United States before sales were made, and then stored at a warehouse here until they were sold. Rather, it is more like
Brake Drums and Brake Rotors from the People’s Republic of China
and
Stainless Steel Sheet and Strip in Coils from Germany,
64 Fed.Reg. 30,710, 30,733 (Cmt.l2)(Dep’t Commerce June 8, 1999) (final determination of sales at less than fair value)(finding that because no warehouses were maintained in the United States and goods were directly shipped to unaffiliated customers, credit expenses, rather than inventory carrying costs for time on the water, were appropriate measure of sales costs during overseas transit).
Here, as in those cases, Commerce chose to use the date of shipment for the date on which credit expenses would begin to run. But for other calculations in this review, Mittal points out, and Commerce agrees, “Commerce used the invoice date as the date of sale for all of [Mittal’s] constructed export price [] sales, even though [Mittal’s] merchandise was shipped from Trinidad before [Mittal] issued its invoice.” PL’s Resp. Ct.’s Feb. 14 Letter 1-2;
see
D.’s Resp. Ct.’s Letter Feb. 14 & Consent Mot. Partial Voluntary Remand 2
(“D.’s Resp. Ct. ’s Letter
”). For those other calculations, the government explains that it used the invoice date for date of sale because “the terms of sale ... often changed from the order date to the invoice date.” D.’s Resp. Ct.’s Letter at 2 (quoting Mem. From Magd Zalok to Gary Taverman,
CEP Verification of the Sales Resp. In the Antidumping Investigation of Carbon and certain Alloy Steel Wire Rod from Trinidad & Tobago
(June 12, 2000)).
Commerce chose to use the later date of invoice because it found that in this case, the material terms of sale were not set before the invoice date, despite the fact that goods were shipped and en route to customers before invoices were issued. The finding as to date of sale was not challenged by Mittal, nor does the court find it unreasonable. However, it seems inconsistent for Commerce to then calculate credit expenses beginning on the date of shipment.
Recognizing this, Commerce moves for a voluntary remand, with Mittal’s consent.
D.
’s
Resp. Ct. ’s Letter.
In its motion, the government recognizes that “Mittal may not have begun to extend credit at the date of shipment (given its selling practice of invoicing its unaffiliated customers after
shipping the merchandise from the foreign port, but not maintaining inventory in the United States).”
Id.
at 3. In response to Commerce’s request, the court grants Commerce’s motion for remand. On remand, Commerce may determine the date on which credit expenses should begin to run, keeping in mind its previous determination in this review that the material terms of sale are not set until Mittal issues an invoice.
B.
Carrying Costs
Where the export price is constructed, as here, there are both indirect costs of sale (costs associated with a sale between the two affiliated entities) and direct costs (those costs associated with a sale to an unaffiliated customer). Commerce “ordinarily do[es] not deduct [from CEP] indirect expenses incurred in selling to the affiliated U.S. importer.”
Stainless Steel Butt-Weld Pipe Fittings From Taiwan,
63 Fed.Reg. at 67,856 (Cmt.2);
see also Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From Japan and Tapered Roller Bearings, Four Inches or Less in Outside Diameter, and Components Thereof, From Japan,
62 Fed.Reg. 11,825, 11,834 (Dep’t Commerce March 13, 1997)(final results of antidump-ing duty administrative reviews and termination in part);
see also Gray Portland Cement and Clinker From Mexico,
62 Fed.Reg. 17,148, 17,168 (Dep’t Commerce, April 9, 1997) (final results of antidumping duty administrative review). Thus, when the affiliated U.S. company receives merchandise shipped from abroad and warehouses it in the United States prior to selling it, the inventory carrying costs for the time in transit from the foreign country to the United States is considered to be an indirect cost, and is not deducted from CEP.
Stainless Steel Butt-Weld Pipe Fittings From Taiwan,
63 Fed.Reg. at 67,856 (Cmt.2). Commerce defines inventory carrying costs as “interest expenses incurred ... between the time the merchandise leaves the production line at the factory to the time the goods are shipped to the first unaffiliated customer.”
Decisions Mem.
at 4 (Cmt.2).
Here, Mittal reported that merchandise was shipped from Trinidad
&
Tobago, and upon arrival in the United States, MSNA unloaded the merchandise and arranged for its delivery to unaffiliated customers.
Questionnaire Response,
P.R. Doc. 16, C.R. Doc. 5 at 24-28. Nonetheless, MSNA reported inventory carrying costs in the United States.
See
Letter to the Honorable Carlos M. Gutierrez, Secretary of Commerce from Eric Emerson Re:
Carbon and Alloy Steel Wire Rod from Trinidad & Tobago: Submission of Case Brief,
P.R. Doc. 53, C.R. Doc. 23, 9-10. As noted above, Commerce disagreed and did not permit a reduction of CEP for inventory carrying costs in the United States. Commerce reasoned that once the sale has occurred and the goods are shipped to an unaffiliated customer, credit expenses are the appropriate variable for costs related to sale. This is logical because the merchandise is no longer in inventory. Therefore, Commerce’s decision to assess inventory carrying costs only until the goods were shipped from Trinidad & Tobago appears reasonable. Commerce’s decision, however, may be affected by its determination of appropriate credit expenses, given its treatment of invoice date as date of sale in this review. On remand, therefore, Commerce may reassess its decision regarding inventory carrying costs in light of its reconsideration of credit expenses.
Conclusion
For the foregoing reasons, the court affirms in part and remands in part Com
merce’s determinations, and denies Plaintiffs Motion for Judgment on the Agency Record.
Remand results are due by June 25, 2007. Comments are due by July 16, 2007. Reply comments are due by July 26, 2007. SO ORDERED.