Marley Co. v. FE Petro, Inc.

38 F. Supp. 2d 1070, 1998 U.S. Dist. LEXIS 20811, 1998 WL 939439
CourtDistrict Court, S.D. Iowa
DecidedSeptember 23, 1998
DocketCiv. 3-97-70025
StatusPublished
Cited by8 cases

This text of 38 F. Supp. 2d 1070 (Marley Co. v. FE Petro, Inc.) is published on Counsel Stack Legal Research, covering District Court, S.D. Iowa primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Marley Co. v. FE Petro, Inc., 38 F. Supp. 2d 1070, 1998 U.S. Dist. LEXIS 20811, 1998 WL 939439 (S.D. Iowa 1998).

Opinion

*1073 MEMORANDUM OPINION, RULINGS ON MOTIONS FOR SUMMARY JUDGMENT, AND ORDERS

VIETOR, District Judge.

The Marley Company (“Marley”) brings this action against Charles Franklin and FE Petro, Inc. (“FE Petro”), 1 concerning submersible pump technology used in gasoline stations. Marley organizes its complaint into the following counts: (1) conversion by Franklin; (2) specific performance of technical employee agreements requiring assignment of patent rights from Franklin to Marley; (3) misappropriation of trade secrets by Franklin and FE Petro; (4) declaratory judgment for patent invalidity, unenforce-ability, and non-infringement; (5) unfair competition by Franklin and FE Petro; and (6) implied license under shop right. FE Petro originally filed its own action for patent infringement against Marley in the United States District Court for the Western District of Wisconsin. That case was transferred to this court and consolidated with the present case. 2 Petro also filed an answer to Marley’s complaint ■which contained the following counterclaims: (1) Lanham Act violation; (2) defamation of Franklin; (3) defamation of FE Petro; and (4) abuse of process. Pe-tro moves for summary judgment on Marley’s conversion, misappropriation, assignment, shop right, and unfair competition claims. Marley resists and moves for summary judgment on Petro’s Lan-ham Act, defamation, and abuse of process claims. The motions are submitted.

SUMMARY JUDGMENT STANDARD

Rule 56 of the Federal Rules of Civil Procedure provides that summary judgment

shall be rendered forthwith if the pleadings, depositions, answers to interrogatories, and admissions on file, together with the affidavits, if any, show that there is no genuine issue as to any material fact and that the moving party is entitled to a judgment as a matter of law.

Fed.R.Civ.P. 56(c). To preclude the entry of summary judgment, the nonmovant must make a sufficient showing on every essential element of their case for which they have the burden of proof at trial. Celotex Corp. v. Catrett, 477 U.S. 317, 322-23, 106 S.Ct. 2548, 91 L.Ed.2d 265 (1986); Continental Grain Co. v. Frank Seitzinger Storage, Inc., 837 F.2d 836, 838 (8th Cir.1988). Rule 56(e) requires the nonmoving party to go beyond the pleadings and by affidavits, or by the depositions, answers to interrogatories, and admissions on file, designate “specific facts showing that there is a genuine issue for trial.” Fed. R.Civ.P. 56(e); Celotex, 477 U.S. at 324, 106 S.Ct. 2548; Johnson v. Schopf, 669 F.Supp. 291, ' 295 (D.Minn.1987). The quantum of proof that the nonmoving party must produce is not precisely measurable, but it must be “enough evidence so that a reasonable jury could return a verdict for the nonmovant.” Anderson v. Liberty Lobby, Inc., 477 U.S. 242, 257, 106 S.Ct. 2505, 91 L.Ed.2d 202 (1986); Johnson, 669 F.Supp. at 295-96.

FACTS

For the purposes of this motion, the following facts are undisputed. Franklin has worked in the petroleum pump business for over thirty years. Franklin spent a majority of this time working for Marley in a number of different capacities. Franklin progressed from working in Marley’s engineering department, where he *1074 worked from 1967 until 1970, to Vice President of Sales and Marketing. While Vice President of Sales and Marketing at Marley, Franklin and his department would request the engineering department to consider certain design changes or new products, or to address certain problems uncovered in the field. In 1980, while Vice President of Sales and Marketing for Marley, Franklin requested the engineering department to consider performing a feasibility study into the concept of adjustable piping for the fuel pumps. Ronald E. Green, Marley’s Manager of Engineering in 1980, approved Franklin’s request for “Engineering Action” to determine the feasibility of providing four foot pumps with adjustable piping to fit tanks with various diameters and depths. In response to this request, the engineering department developed two technical drawings of the proposed piping dated February 15, 1980, one drawing dated May 7, 1980, and a working model of a telescoping pipe assembly.

The two technical drawings dated February 15, 1980, and the working model were created by Elmer Deters, a former engineer with Marley who was working as an independent consultant for the company in 1980. Deters and Marley entered into a technical employee agreement dated February 22, 1972, which provided that, in exchange for Deters’ continued employment at Marley, Deters disclose and assign to Marley all inventions made by him during the period of his employment with Marley. Deters also agreed not to keep or retain any drawing, blue print or other reproduction or list, schedule, extract or other data as to any matter, concept, idea or other thing in or prepared from the records of Marley. Deters and Marley subsequently entered into a consulting agreement dated August 31, 1978, which did not include any obligation to transfer or assign any rights in his ideas, work product, or inventions to Marley. Marley hired Deters under this consulting agreement to do general work on Marley’s products, including the modification of existing products to reduce cost or solve reliability problems; the development, design, and model preparation of new products; patent review; and other consultation. Although not required under the consulting agreement, Deters assigned patent applications to Marley while working as a consultant.

Richard Allender, an engineer at Marley, prepared the technical drawing of the telescoping pipe coupling dated 5-7-80. Allender based his drawing on the Deters’ drawing dated 2-15-80. Allender has detailed recall of the telescoping pipe project and of the assembly design discussed at that time.

Marley also assembled a Value Analysis (“VA”) team to study the telescoping pipe assembly and to determine the feasibility of implementing such a design in its commercial product line. The members of the team included: Betty Golden, Charles Os-tert, Allender, and Curt Trondson. Golden, the recording secretary for the VA team, was also Franklin’s secretary. Golden, Ostert, and Allender recall the telescoping pipe assembly project and their service on the VA team. Ostert specifically recalls the aforementioned drawings and model. Ostert saw the model only once when he received it for storage in the engineering laboratory. Trondson is now an employee of FE Petro.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

NCMIC Finance Corporation v. Artino
638 F. Supp. 2d 1042 (S.D. Iowa, 2009)
Sioux Biochemical, Inc. v. Cargill, Inc.
410 F. Supp. 2d 785 (N.D. Iowa, 2005)
Gleason Works v. Oerlikon Geartec, AG
141 F. Supp. 2d 334 (W.D. New York, 2001)
Liles v. American Corrective Counseling Services, Inc.
131 F. Supp. 2d 1114 (S.D. Iowa, 2001)
Dome Patent L.P. v. Permeable Technologies, Inc.
190 F.R.D. 88 (W.D. New York, 1999)

Cite This Page — Counsel Stack

Bluebook (online)
38 F. Supp. 2d 1070, 1998 U.S. Dist. LEXIS 20811, 1998 WL 939439, Counsel Stack Legal Research, https://law.counselstack.com/opinion/marley-co-v-fe-petro-inc-iasd-1998.