Manufacturers Technologies, Inc. v. Cams, Inc.

728 F. Supp. 75, 15 U.S.P.Q. 2d (BNA) 1623, 1989 U.S. Dist. LEXIS 15862, 1989 WL 160667
District Court, D. Connecticut·Decided June 30, 1989·No. Civ. N-85-253(TFGD)·Published·Cited by 17 cases

Opinion

*78 MEMORANDUM OF DECISION

DALY, District Judge.

This matter is before the Court for a determination of the amount of damages, if any, the plaintiff is entitled to recover as a result of the Court's liability decision in Manufacturers Technologies, Inc. v. Cams, Inc., 706 F.Supp. 984 (D.Conn.1989) (“MTI I’). In that decision, this Court held that the defendants infringed the plaintiffs screen display and computer program copyrights, violated section 43 of the Lanham Act, 15 U.S.C. § 1125, and also violated the Connecticut Unfair Trade Practices Act (“CUTPA”), Conn.Gen.Stat. § 42-110b(a). 1 Because this matter was bifurcated, the damages trial was heard by the Court on May 31, 1989 and June 1, 1989.

BACKGROUND AND FINDINGS OF FACT

Plaintiffs and defendants are in the business of selling computer programs designed to assist in the cost calculation or cost estimating a manufactured part. The market for their products consists of roughly 100,000 “job shops,” parts manufacturers, and other companies that manufacture machine parts.

After several years of development, plaintiffs “COSTIMATOR” computer program was introduced to the marketplace on or about January 1984. After two years of steady sales in 1984 and 1985, in 1986 and 1987 the sales of COSTIMATOR, plaintiffs only significant product, rose dramatically. Over this four year period as COSTIMATOR gained in market recognition its annual sales rose from 30 units to 93 units. Though modest, these sales are significant in view of COSTIMATOR’s retail price. Initially sold for $6000 to $7000 in 1983, COSTIMATOR’s price was increased to just under $19,000 in 1984 and then increased to around $19,800 in the Spring of 1988. These sales are also significant because plaintiff, although a relatively young and small company, was one of several pioneers in developing a sophisticated computer-aided cost estimating program. Plaintiff and defendants have stipulated that plaintiff’s gross profit per sale of COSTIMATOR, after the initial price increase, was approximately $13,800.

Plaintiff’s COSTIMATOR program has received favorable reviews in the trade press and in the marketplace in general on account of the ease with which it enables a user to develop an accurate estimate of the cost of manufacturing a part. Plaintiff has expended substantial sums in advertising and promoting its COSTIMATOR program. Despite its favorable reception in the marketplace and the rapid rate of growth of its sales in 1985, 1986, and the first half of 1987, COSTIMATOR’s sales began to decline in the second half of 1987 all the way through the end of May 1989. For example, in 1988 plaintiff sold only 70 units, and through May 26, 1989 plaintiff’s sales amounted only to 31 units. For 1988 alone, plaintiff had projected 150 sales. Plaintiffs and defendants have also stipulated that the defendants infringement of plaintiff’s program and screen displays commenced in February 1985. It continued through January 30, 1989 the date of the Court’s liability decision and the point in time when the Court permanently enjoined the sales of defendants’ infringing computer programs, QUICK COST (“QC”) III, V, and X, and RAPIDCOST (“RC”) 1, 2, and 3.

During the period of 1985 through the end of 1988, the defendants sold eighty-six QC III, V, and X and RC 1, 2, and 3 programs (not counting those programs that were sold but later returned). From mid-1986 through mid-1987, sales of defendants’ programs grew at an increasing rate. However, like plaintiff’s COSTIMATOR sales, after mid-1987 defendants’ sales declined. For 1986, 1987, and 1988, the defendants sold 23, 34, and 19 units in each respective year. The retail prices of defendants’ programs range from approximately one to twenty percent of the retail price of COSTIMATOR. Twenty-two of the defendants programs were returned by their purchasers. These returns were not only fostered by the defendants’ liberal “no questions asked” return policies, but also *79 caused by dissatisfaction with the performance of these programs.

As noted in MTI I, the defendants’ promotional brochures advertising the QC and RC programs at issue falsely ascribed several capabilities to the programs that they did not in fact perform. 706 F.Supp. at 1003. At the damages trial, both defendants Cormier and St. Martin again admitted that their programs never could perform these capabilities. Each also testified and offered other evidence, however, that shortly after plaintiffs lawsuit was commenced in June 1985 they took steps to ensure that the capabilities charts were either reprinted or appropriately marked to reflect only the capabilities that the programs could actually perform. Cormier also candidly admitted that prior to using the reprinted brochures he sent out the remaining incorrect brochures and that he may or may not have crossed out the false capabilities listed therein. The defendants also used two other methods to advertise their programs. First, they made relatively limited expenditures to purchase relatively small advertisements of roughly one to two square inches in various trade publications. Second, CAMS advertised and sold its programs through a distributor, ABR Business Machines Corporation (“ABR”), which published and distributed a catalog with, inter alia, full page advertisements of the defendants’ programs. This catalog, with a circulation of 60,000 to 80,000, was twice distributed by ABR with the full page advertisement of defendants’ product to substantial segments of the market for these types of programs.

The market for defendants’ and plaintiff’s programs overlapped to a significant extent. But though not readily quantifiable, the price differential between the programs did set them apart. However, there was also a perception fostered by defendants’ advertising efforts and capabilities charts that defendants’ programs performed substantially the same functions as COSTIMATOR for a fraction of the price. This perception was confirmed by the testimony of several customers. One customer, Michael Stan, testified that defendant Cor-mier told him about his prior involvement with the plaintiff as a sales representative and that he struck out on his own to market a software program “that would do the same thing [as COSTIMATOR] for a fraction of the price.” Cormier denies making such a statement.

By way of example, though small or midsize cars are not the same as large luxury automobiles, they both compete for consumers seeking transportation by automobile. Some consumers are simply not able to make the outlay to purchase a luxury automobile, while others who are able might jump at the chance to get a bargain which may or may not perform as well. In part, the evidence in this case comports with this simplistic example. Yet, the market for computer cost estimating software is different from the market for automobiles. First of all the number of competing programs and hence the opportunity for selection is more limited. Plaintiff’s and defendants’ witnesses have estimated that there are anywhere from six to twenty-four computer cost estimating programs presently on the market.

Free access — add to your briefcase to read the full text and ask questions with AI

Manufacturers Technologies, Inc. v. Cams, Inc., 728 F. Supp. 75, 15 U.S.P.Q. 2d (BNA) 1623, 1989 U.S. Dist. LEXIS 15862, 1989 WL 160667 (D. Conn. 1989).

728 F. Supp. 75 (Manufacturers Technologies, Inc. v. Cams, Inc.) — published by Counsel Stack Legal Research, free access to 12M+ legal documents.

Related

Brighton Collectibles, Inc. v. RK Texas Leather Mfg.
923 F. Supp. 2d 1245 (S.D. California, 2013)
Cohen v. United States
100 Fed. Cl. 461 (Federal Claims, 2011)
Irwin Industrial Tool Co. v. Worthington Cylinders Wisconsin, LLC
747 F. Supp. 2d 568 (W.D. North Carolina, 2010)
Microsoft Corp. v. Tierra Computer, Inc.
184 F. Supp. 2d 1329 (N.D. Georgia, 2001)
Quinn v. City of Detroit
23 F. Supp. 2d 741 (E.D. Michigan, 1998)
PAR Microsystems, Inc. v. Pinnacle Development Corp.
995 F. Supp. 658 (N.D. Texas, 1998)
Gucci America, Inc. v. Rebecca Gold Enterprises, Inc.
802 F. Supp. 1048 (S.D. New York, 1992)
Larsen v. Ortega
816 F. Supp. 97 (D. Connecticut, 1992)
U.S. Payphone, Inc. v. Executives Unlimited of Durham, Inc.
781 F. Supp. 412 (M.D. North Carolina, 1991)
Allen-Myland, Inc. v. International Business MacHines Corp.
770 F. Supp. 1014 (E.D. Pennsylvania, 1991)
Sunset Lamp Corp. v. Alsy Corp.
749 F. Supp. 520 (S.D. New York, 1990)