Kernan v. Kurz-Hastings, Inc.

997 F. Supp. 367, 1998 U.S. Dist. LEXIS 2985, 1998 WL 113351
CourtDistrict Court, W.D. New York
DecidedFebruary 10, 1998
Docket1:95-cv-00929
StatusPublished
Cited by8 cases

This text of 997 F. Supp. 367 (Kernan v. Kurz-Hastings, Inc.) is published on Counsel Stack Legal Research, covering District Court, W.D. New York primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Kernan v. Kurz-Hastings, Inc., 997 F. Supp. 367, 1998 U.S. Dist. LEXIS 2985, 1998 WL 113351 (W.D.N.Y. 1998).

Opinion

DECISION AND ORDER

HECKMAN, United States Magistrate Judge.

In accordance with 28 U.S.C. § 636(c), the parties have consented to have the undersigned conduct all further proceedings in this case, including trial and entry of final judgment. Third-party defendant Navitas Co., Ltd. (“Navitas”) has moved to dismiss the action against it for lack of personal jurisdiction. For the following reasons, Navitas’ motion is denied.

BACKGROUND

On September 20, 1995, plaintiffs commenced this action in New York State Supreme Court, Allegany County, against Kurz-Hastings, Inc. (“Kurz-Hastings”) for damages arising out of personal injuries allegedly sustained by plaintiff Lillian Kernan on October 15,1992, while she was operating a hot stamping press during the course of her employment at Forbes Products Corporation (“Forbes”) in Dansville, New York. On October 20, 1995, Kurz-Hastings (a Pennsylvania corporation) removed the action to this court on the basis of diversity jurisdiction.

Subsequently, on November 18, 1996, this court entered an order upon stipulation of the parties (Item 11) granting plaintiffs leave *370 to file an amended complaint setting forth causes of action against Kurz-Hastings based on theories of negligence, strict products liability, breach of warranty and loss of services for its alleged design, manufacture, assembly and marketing of the hot stamping press. On November 27, 1996, Kurz-Hastings filed a third-party complaint for contribution or indemnification against Forbes, as Ms. Kernan’s employer, and against Navitas, the Japanese manufacturer of the press (Item 14). In the third-party complaint, Kurz-Hastings alleges that Navitas designed and manufactured the press machine which allegedly caused Ms. Kernan’s injuries (id., ¶ 14).

On March 11, 1997, Navitas filed an answer to the third-party complaint asserting several affirmative defenses, including lack of personal jurisdiction (Item 18). In its answer, Navitas “admits that it manufactured, partially designed, and assembled a product called HT-10L-PL Vertical Hot Stamping Press'” (Item 18, ¶ “Sixth”).

On April 3,1997, in order to determine the factual basis for plaintiffs’ jurisdictional allegations, Navitas served Kurz-Hastings'with the following “Request for Admission:”

REQUEST FOR ADMISSIONS 1. Neither DefendanVThird-Party Plaintiff KURZ-HASTINGS, INC., nor its attorneys have any evidence in admissible or potentially admissible form demonstrating that Third-Party Defendant NAVITAS CO. LTD. knew or reasonably should have known that the product which is alleged to be defective in this lawsuit was, or would be, sold in New York State.

Item 24, Ex. D). On May 19, 1997, KurzHastings replied to this request as follows: Denied as stated. For some years prior to

the sale of the equipment which is the subject of this lawsuit, Third-Party Defendant Navitas ... had maintained a relationship with Third-Party Plaintiff, KurzHastings ... whereby Navitas authorized Kurz-Hastings to resell and distribute stamping foil machines such as the one at issue in this litigation throughout the United States and Canada, and on a number of occasions, Navitas in fact sold products to Kurz-Hastings for the purpose of such resale and distribution. Navitas had no reason to believe that the equipment it sold and delivered to a Pennsylvania corporation would remain in Pennsylvania, but rather knew or should have known that it could and would ultimately be delivered to and used in other states, including New York.

Id., Ex. E).

On October 31, 1997, Navitas moved to dismiss the third-party complaint against it for lack of personal jurisdiction. According to the supporting affidavit of Navitas’ corporate president Nubuo Arita, Navitas is a Japanese corporation with no significant contacts in New York (Arita Aff., attached to Item 24). Mr. Arita states that Navitas has never transacted or solicited business or provided any services in New York, and is not licensed or registered to do so. According to Mr. Arita, Navitas does not maintain an office, pay taxes, own property, or otherwise engage in any conduct in New York to show that it anticipated that it would be subject to the personal jurisdiction of a court in New York State. Mr. Arita states that Navitas had an oral agreement with Kurz-Hastings to manufacture the Model HT-10L-PL press (Arita Aff., ¶ 23), but “had no knowledge of what would become of the subject press machine after it was sold to Kurz-Hastings in Pennsylvania, beyond the general knowledge that Kurz-Hastings would resell it somewhere in Pennsylvania or one of the other 49 states in the United States” (id., ¶ 26).

In response, Kurz-Hastings has submitted the affidavit of its vice president of sales Joseph D. McNamara (Item 26, Ex. A). Mr. McNamara states that the machine in question was sold to Forbes by Kurz-Hastings in January, 1979 (see id., Ex. B). He further states that, on April 22,1976, Kurz-Hastings entered a contract with Taihei Industries Co., Ltd., Navitas’ corporate predecessor, under which Taihei granted Kurz-Hastings an exclusive right to sell and promote Taihei’s products in the United States (see id., Ex. C). Mr. McNamara also states that Navitas services its products sold in the United States by providing a credit for parts replaced up to 10 days after sale.

*371 Additional documentation submitted by Kurz-Hastings includes a February, 1987, invoice for spare parts shipped by Taihei to Kurz-Hastings in Fullerton, California (Item 27, Ex. A); a May 26, 1987, fax from KurzHastings to Taihei, and a return fax dated May 29,1987, pertaining to a visit to California by Taihei’s “top engineer” {id., Ex. B); a Kurz-Hastings invoice dated March 20,1986, for credit on spare parts returned to Taihei (id, Ex. C); an August 20, 1986 fax from Taihei to Kurz-Hastings indicating that two Taihei employees had returned to Japan from a visit to an unspecified location in the United States (id, Ex. D); a “service form” dated January 31, 1979, for warranty replacement of a “damaged control pack” at an unspecified location of Forbes Products {id., Ex. E); documentation reflecting the change in name of Taihei Industries to Navitas, effective September 1,1987 (id, Ex. F); a list showing that 168 Taihei machines were sold by Kurz-Hastings between 1976 and 1981 (Item 28, Ex. A); and, documentation pertaining to the October, 1985 sale of a hot stamping press to Forbes, and delivery and service of the machine at Forbes’ Tryon, North Carolina plant (id, Ex. B).

Oral argument of the motion to dismiss was held before the undersigned on January 15, 1998. What follows is the court’s ruling on Navitas’ motion.

DISCUSSION

A Motion to Dismiss for Lack of Personal Jurisdiction.

In Metropolitan Life Ins. Co. v. Robertson-Ceco Corp., 84 F.3d 560 (2d Cir.), cert. denied, — U.S. -, 117 S.Ct.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Lipson v. Birch
46 F. Supp. 3d 206 (E.D. New York, 2014)
City of New York v. A-1 Jewelry & Pawn, Inc.
247 F.R.D. 296 (E.D. New York, 2007)
Kernan v. Kurz-Hastings, Inc.
175 F.3d 236 (Second Circuit, 1999)
Thompson v. Nishimoto Trading Co.
180 Misc. 2d 466 (New York Supreme Court, 1999)
Hamilton v. Accu-Tek
32 F. Supp. 2d 47 (E.D. New York, 1998)

Cite This Page — Counsel Stack

Bluebook (online)
997 F. Supp. 367, 1998 U.S. Dist. LEXIS 2985, 1998 WL 113351, Counsel Stack Legal Research, https://law.counselstack.com/opinion/kernan-v-kurz-hastings-inc-nywd-1998.