Johnson v. Ellis

604 F.2d 950, 1979 U.S. App. LEXIS 11091
CourtCourt of Appeals for the Fifth Circuit
DecidedOctober 18, 1979
Docket77-1919
StatusPublished

This text of 604 F.2d 950 (Johnson v. Ellis) is published on Counsel Stack Legal Research, covering Court of Appeals for the Fifth Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Johnson v. Ellis, 604 F.2d 950, 1979 U.S. App. LEXIS 11091 (5th Cir. 1979).

Opinion

604 F.2d 950

5 Fed. R. Evid. Serv. 504

Susie Mae JOHNSON, Plaintiff-Appellant Cross-Appellee,
v.
WILLIAM C. ELLIS & SONS IRON WORKS, INC., etc., Defendant-Appellee.
Long Reach Manufacturing, a Division of Anderson, Clayton &
Co., Defendant-Appellee Cross-Appellant.

No. 77-1919.

United States Court of Appeals,
Fifth Circuit.

Oct. 18, 1979.

Robert Lawson Holladay, P. J. Townsend, Jr., Drew, Miss., for Johnson.

W. O. Luckett, Jr., Clarksdale, Miss., for Ellis.

W. Swan Yerger, Robert T. Gordon, Jr., Jackson, Miss., for Long Reach.

Appeals from the United States District Court for the Northern District of Mississippi.

Before TUTTLE, GODBOLD and RUBIN, Circuit Judges.

ALVIN B. RUBIN, Circuit Judge:

Jack Johnson died at the age of 20 as a result of injuries received while he was working on a cotton compress. His mother seeks in this diversity action to recover damages for his death from the company that had repaired and rebuilt the compress thirteen years before, and from the company that had later manufactured and installed a bale unloader device on the machine. The district court directed a verdict for the repairer; held that, as a matter of law, Johnson was contributorily negligent; and submitted the claim against the manufacturer of the bale unloader to a jury, which returned a verdict for the defendant. We conclude that the district court's dismissal of claims against the repairer was correct, but we find a new trial of the claim against the manufacturer necessary.

I. FACTS

On March 14, 1974, Jack Johnson was working for National Compress as a foot headtucker on a cotton compressor, a job he had held for three months. In the course of his work, his head was caught between two parts of the press, a moving part on its southeast corner and a stationary upper member of the press that had been extended by a Long Reach Model Bale Unloader manufactured and installed by Long Reach.

To operate the compress a bale of cotton is conveyed into the compressor area by a belt; then a moving lower platen rises and presses the bale against a stationary upper platen. To receive the bale, the lower platen is recessed below floor level in what is called a "pit". Two workmen perform manual operations on the bale such as the adjusting and tucking its bagging. One is stationed at each end of the compress.

When compressing a standard bale, the worker at what is called the foot of the bale, steps into the pit in order to pull into place the hooks holding the bagging and then gathers the bagging around the bale. Bales once bound no longer have hooks; if the bale requires only rebanding, it is simply compressed at a slower rate than the standard bale, and the foot headtucker may not be required to step down into the pit unless the bagging falls away from the bale.

The foot headtucker is instructed to keep one foot on the warehouse floor whenever he steps into the pit and to center himself between the huge metal arms moving overhead that supply power to the lower platen and are known as lifter links. As the lower platen rises he is to keep only one foot on it, rising with it until it reaches the warehouse floor level, when he is to remove that foot and step back so that both feet are on the warehouse floor.

As the lower platen rises, one lifter link moves from behind and to the left of the foot headtucker in the general direction of the headtucker on the opposite side. Another lifter link behind and to his right moves in the same direction. Both of the lifter links move past his head and pass within a few inches of the side of the stationary upper platen. This narrows the area between the two metal pieces so that any object between them would be pinched; hence this is called a "pinch point."

When the accident occurred there were no guards over the pinch points. Long Reach, under a contract with National Compress, had manufactured and installed a bale unloader shortly before the accident. It was not yet operational when the accident occurred, but it nevertheless shifted the pinch points so that they were closer to the work position of the foot headtucker than they were before it was installed. The foot headtucker could safely move laterally between the lifter links only 34 and 1/2 inches, and he was required to perform his duties in this very circumscribed area. Johnson was fatally injured when his head was caught in one of the pinch points while a reband bale was being compressed.

Evidence was introduced that Johnson had been instructed in the proper procedures to be followed in working as a foot headtucker and that he had initially worked under supervision. The only eyewitness to the events immediately preceding the accident testified that Johnson had stepped into the pit with both feet; he believed Johnson had not attempted to step off the lower platen as it rose up past the level of the warehouse floor; and he had observed Johnson leaning his body and projecting his head to the left in order to carry on a conversation with other members of the crew. However, at that time Johnson's head did not appear to be in a dangerous position. Nash was not watching Johnson at the exact moment he was injured and did not see whether Johnson ever attempted to step onto the warehouse floor.

Other crew members testified that Johnson had been talking and joking with the crew. Several other witnesses testified that, if Johnson had been performing his job in the established and proper manner, it would have been impossible for his head to have been caught between the lifter link and the stationary platen.

Thirteen years before, National Compress had engaged Ellis to move the compress from another location, assemble, inspect, repair, and reassemble it in the plant where Johnson was injured.1 In repairing the machine, Ellis remachined and reworked some of the parts, and replaced others.

Susie Mae Johnson, as representative of Jack Johnson's wrongful death beneficiary, contends that both Ellis and Long Reach were under a duty to install guards for the pinch points or to warn National Compress of the danger created by them.

The trial court directed a verdict in favor of Ellis at the close of plaintiff's case on the basis that no negligence by Ellis had been shown and, as a repairer, it had no duty to warn of conditions existing on the machine at the time it was repaired if it did nothing to alter these conditions. The trial judge instructed the jury that, as a matter of law, Johnson had been negligent and that his negligence was a proximate cause of his injury and death, but he submitted to the jury the issues of whether Long Reach had been negligent and whether it was liable on the basis of strict liability. He also instructed the jury to return a verdict for Long Reach if it found that Johnson's negligence was the sole proximate cause of his injury. The jury returned a verdict for Long Reach.

II. LIABILITY OF ELLIS

There is no evidence that Ellis was negligent.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Finn v. Wood
178 F.2d 583 (Second Circuit, 1950)
Mrs. Fern W. Reuter v. Eastern Air Lines, Inc.
226 F.2d 443 (Fifth Circuit, 1955)
United States v. John H. Fewell
255 F.2d 496 (Fifth Circuit, 1958)
Robert D. Putman v. Erie City Manufacturing Company
338 F.2d 911 (Fifth Circuit, 1964)
The Boeing Company v. Daniel C. Shipman
411 F.2d 365 (Fifth Circuit, 1969)
Adam G. Nunez v. The Superior Oil Company
572 F.2d 1119 (Fifth Circuit, 1978)
Mrs. Ivy L. Gordon v. Niagara MacHine & Tool Works
574 F.2d 1182 (Fifth Circuit, 1978)
Harrist v. Spencer-Harris Tool Co.
140 So. 2d 558 (Mississippi Supreme Court, 1962)
Reilly v. KING CY. CENT. BLOOD BANK
492 P.2d 246 (Court of Appeals of Washington, 1971)
Greenman v. Yuba Power Products, Inc.
377 P.2d 897 (California Supreme Court, 1963)
Austin v. Riverside Portland Cement Co.
282 P.2d 69 (California Supreme Court, 1955)
Kitsap County Transp. Co. v. Harvey
15 F.2d 166 (Ninth Circuit, 1926)
Lemley v. J & B TIRE CO.
426 F. Supp. 1378 (W.D. Pennsylvania, 1977)
Sam Shainberg Company of Jackson v. Barlow
258 So. 2d 242 (Mississippi Supreme Court, 1972)

Cite This Page — Counsel Stack

Bluebook (online)
604 F.2d 950, 1979 U.S. App. LEXIS 11091, Counsel Stack Legal Research, https://law.counselstack.com/opinion/johnson-v-ellis-ca5-1979.