Harrist v. Spencer-Harris Tool Co.

140 So. 2d 558, 244 Miss. 84, 1962 Miss. LEXIS 427
CourtMississippi Supreme Court
DecidedMay 7, 1962
Docket42248
StatusPublished
Cited by37 cases

This text of 140 So. 2d 558 (Harrist v. Spencer-Harris Tool Co.) is published on Counsel Stack Legal Research, covering Mississippi Supreme Court primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Harrist v. Spencer-Harris Tool Co., 140 So. 2d 558, 244 Miss. 84, 1962 Miss. LEXIS 427 (Mich. 1962).

Opinion

*89 Rodgers, J.

This is a products liability suit growing out of an accident, in which Harrell Harrist, an employee of Rowley Drilling Company received an injury alleged to have been caused by the faulty manufacture of an oil rig sold through a dealer to appellant’s employer.

Appellant filed a hill in the Chancery Court of Adams County, Mississippi, against Spencer-Harris Tool Company, a Texas corporation, hereinafter called the “Manufacturer”; The Youngstown Sheet and Tool Company, an Ohio corporation, The Continental Supply Company, a Delaware corporation, subsidiary of the Ohio corporation, and the Continental Emsco Company, a division trade name of the Ohio corporation, all referred to in the hill of complaint under the trade name of Continental Emsco Company, and which will he referred to herein as “Dealer”. Rowley Drilling Company and Stephen J. Rowley, President, were made defendants for the purpose of garnishment process on an attachment in chancery, and are hereinafter referred to as the “Employer.”

The bill of complaint alleges that the Manufacturer was engaged in the business of “welding, designing, manufacturing, constructing, planning, engineering, selling and distributing oil well drilling derricks, drilling rigs, and well supplies ’ ’, and that the Manufacturer sold a drilling rig mounted on a tandem rear axle trailer which could he moved across country highways with conventional truck tractor to the dealer who in turn sold it to appellant’s employer.

It is alleged that the Manufacturer was negligent in planning, designing and manufacturing the drilling rig, particularly in constructing the platform by welding a two-inch angle iron to the steel mesh floor so as to permit a two-inch perpendicular iron flange at the edge of the platform. It is further charged that the Manufacturer constructed a set of steps designed to be used with the *90 oil rig, and to be attached to the platform by hooks made to fit over the upturned iron flange at the edge. The bill of complaint further charges that the steps were constructed so that the outer edge of the steps were lower than the inner edge, so that the steps slanted downward. The bill of complaint specifically charges negligence on the part of the Manufacturer in construction and unsafe design, being inherently dangerous to persons using the rig in the manner for which it was intended and for which it was sold, so as to render the product unsuitable; that it was the duty of the Manufacturer to design, construct, manufacture, and inspect and test the steps so as to render the product suitable; and that it was its duty to warn persons using the rig and steps of the defects and danger.

It is alleged that the defective and dangerous condition of the oil rig and steps was known, or should have been known, to the Dealer, that the Dealer knew, or from an inspection should have known, that the use of the steps and oil rig would likely cause injury to persons working on it, and that neither the Manufacturer nor Dealer warned the complainant of the dangerous condition of the steps and platform.

Appellant further alleges that the faulty construction of the oil rig and steps was a latent defect which would injure the employee-user, including* employee-complainant. It is alleged that defendants, Manufacturer and Dealer, impliedly warranted to all users that the design and construction was safe for the use for which it was manufactured, and that the negligent manner in which the product was constructed and sold was a breach of warranty to the purchaser, employer Rowley Drilling Company and employee Harrell Harrist.

The bill of complaint charges that on the 14th day of October 1959, while employed by Rowley Drilling Company, appellant slipped upon the defective steps and fell all the way down, seriously and permanently in *91 juring his back and body, and that said accident was the proximate result of defendant’s negligence.

The Manufacturer and Dealer filed separate general demurrers to the original bill of complaint upon two grounds: (1) There is no equity on the face of the bill. (2) The bill fails to state a cause of action against these defendants. The Rowley Drilling Company filed an answer admitting that it owed the Manufacturer $2,-639.46.

The Chancellor entered an order sustaining the demurrers, and upon the refusal of complainant to plead further, a decree was rendered dismissing the cause of action, and from this decree, appellant has appealed to this Court.

Appellant presents two assignments of error, to wit: (1) The court erred in sustaining* the demurrers to the bill of complaint, and (2) the decree of the lower court is contrary to law.

Appellant argues that this is a tort action based upon negligence of the Manufacturer for its failure to use due, ordinary and reasonable care in the construction of an oil rig to be sold to the public under an implied warranty that it had been properly designed and constructed; that it had been inspected, tested and impliedly warranted for safe use for the purpose for which it was constructed.

It is true that this is the general rule recognized by the great weight of authority insofar as implied warranty may be construed as growing out of a sales contract. See Brown v. Murphee, 31 Miss. 91; 12 Am. Jur., Contracts, Sec. 458, p. 1041; 38 Am. Jur., Negligence, Sec. 20, p. 661; 46 Am. Jur., Sales, Sec. 346, p. 529, Sec. 349, p. 534; Implied Warranties of Reasonable Fitness in Mississippi by Clyde E. Bracken, Jr., Mississippi Law Journal, Vol. 28, 1, p. 53 (1956).

There is a common-law rule, however, requiring* that before an injured person may recover under an implied *92 warranty from the manufacturer or seller of the machine for an injury alleged to have been the result of faulty manufacturing, the injured party, in order to recover, must have been a party to the sales contract. This is the “Privity of contract rule.” The rule has been relaxed to some extent by decisions which hold that where a machine constructed so as to be inherently dangerous, the rule does not apply. Moreover, the privity of contract concept is answered by proof that an injured person and defendant bore a personal relationship toward one another which was equivalent to privity. See Le Blanc v. Louisiana Coa Cola Bottling Co., Ltd., 60 So. 2d 873 (La. 1952); 65 C. J. S., Negligence, Sec. 100 (b) 621, (c) 629; Hursh’s American Law of Products Liability, p. 519. Mississippi adopted the later legal concept in the case of Coca-Cola Bottling Works v. Lyons, 145 Miss. 876, 111 So. 305 (1927). In that case this Court held that although a bottle of coca-cola was a gift to the plaintiff from her companion, who was present with her at the retailer’s where the beverage was purchased, this did not bar recovery on the ground of absence of privity of contract.

This Court has for many years consistently followed the common-law rule requiring plaintiff to come with the privity of contract rule. There are numerous decisions by this Court based upon negligence, requiring privity of contract. See: Ford Motor Company v. Myers, 151 Miss. 73, 117 So. 362; Pillars v. R. J. Reynolds Tobacco Co., 117 Miss. 490, 78 So. 365; W. T.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Green v. Allendale Planting Co.
954 So. 2d 1032 (Mississippi Supreme Court, 2007)
Glenn v. Overhead Door Corp.
935 So. 2d 1074 (Court of Appeals of Mississippi, 2006)
Larry Green v. Allendale Planting Company
Mississippi Supreme Court, 2005
Austin v. Will-Burt Company
361 F.3d 862 (Fifth Circuit, 2004)
Austin v. Will-Burt Co.
361 F.3d 862 (Fifth Circuit, 2004)
Batts v. Tow-Motor Forklift Co.
978 F.3d 1386 (Fifth Circuit, 1992)
Toney v. Kawasaki Heavy Industries, Ltd.
763 F. Supp. 1356 (S.D. Mississippi, 1991)
Lloyd v. John Deere Company
922 F.2d 1192 (Fifth Circuit, 1991)
Lloyd v. John Deere Co.
922 F.2d 1192 (Fifth Circuit, 1991)
Holifield v. Pitts Swabbing Co.
533 So. 2d 1112 (Mississippi Supreme Court, 1988)
Brown v. Williams
504 So. 2d 1188 (Mississippi Supreme Court, 1987)
Hedgepeth v. Fruehauf Corp.
634 F. Supp. 93 (S.D. Mississippi, 1986)

Cite This Page — Counsel Stack

Bluebook (online)
140 So. 2d 558, 244 Miss. 84, 1962 Miss. LEXIS 427, Counsel Stack Legal Research, https://law.counselstack.com/opinion/harrist-v-spencer-harris-tool-co-miss-1962.