Jennings v. Tamaker Corp.

201 N.W.2d 654, 42 Mich. App. 310, 1972 Mich. App. LEXIS 935
CourtMichigan Court of Appeals
DecidedJuly 31, 1972
DocketDocket 11684
StatusPublished
Cited by18 cases

This text of 201 N.W.2d 654 (Jennings v. Tamaker Corp.) is published on Counsel Stack Legal Research, covering Michigan Court of Appeals primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Jennings v. Tamaker Corp., 201 N.W.2d 654, 42 Mich. App. 310, 1972 Mich. App. LEXIS 935 (Mich. Ct. App. 1972).

Opinion

T. M. Burns, J.

Plaintiff was an employee of Chatham Food Market at Southgate in Wayne County during the early months of 1968. The food market owned a cardboard baling machine which it had purchased from defendant Great Lakes Enterprises, Inc., a distributing company for defendant Tamaker Corporation. It was the policy of the food market not to permit persons under the age of 18 to operate the baling machine. In January, 1968, plaintiff turned 18 and was thereafter permitted to operate the machine. In January, 1968, a fellow employee of plaintiff suffered an injury when the door of the baling machine closed upon his left arm while he was operating the machine. Plaintiff knew of the injury suffered by *312 his co-worker. Plaintiff operated the machine once or twice a week for periods of several hours and never recalled the machine malfunctioning.

The baling machine is normally loaded from the front with cardboard, and the operator stands off to the right corner of the machine while operating the lever controls with his right hand. On the morning of May 11, 1968, plaintiff was operating the baler in such a position. He had been working the machine for about 1-1/2 hours and had crated three full bales of cardboard. As plaintiff was closing the baler door with his right hand operating the lever, a co-worker approached from the right side of the machine and asked plaintiff for a. cigaret. Plaintiff reached for cigarets located on a ledge on the machine with his right hand, while continuing to operate the door closing the lever with his right forearm. He then heard Helen Romano, another co-worker, scream that his left hand was in the machine. He glanced frantically at his left arm, seeing the baler door closing on it, and then reached for the lever which operated the door of the machine. He pushed the lever in and in so doing only succeeded in further closing the door on his arm. As a result of this accident, plaintiff’s lower left arm was amputated. Plaintiff brought the present action alleging negligence and breach of warranty, including inter alia, that the machine was not safely designed and that adequate warnings had not been posted on the machine. Defendants moved for summary judgment. After consideration of deposition testimony, the trial court granted defendants’ motion. From this decision of the trial court, plaintiffs appeal.

The trial court’s decision was based predominantly on our Supreme Court’s opinion in Fisher v Johnson Milk Co, Inc, 383 Mich 158 (1970). In *313 Fisher, defendant sold to plaintiff, a patent attorney, a wire carrier made to carry four half-gallon bottles of milk. Some time later plaintiff purchased four half-gallon bottles of milk from defendant, put them in the milk carrier and drove home. Upon arriving home, plaintiff got out of his car carrying the milk carrier. He then slipped on some ice and fell, causing the bottom of the carrier to strike the sidewalk and the bottles to break. When he extended his hand to break the fall, the palm landed on pieces of the broken bottles causing it to be severely cut. In ruling in defendant’s favor on plaintiff’s suit for negligence and breach of warranty, the Supreme Court cited with approval the following language from defendant’s brief:

" 'A leading casé on the subject is: Campo v Scofield (1950), 301 NY 468 (95 NE2d 802), in which the New York Court of Appeals affirmed the dismissal of plaintiffs complaint for failure to state a cause of action. The instrumentality involved was an "onion topping” machine. Plaintiff sought recovery for injuries sustained while operating the machine, alleging that the machine was inherently dangerous and negligently designed and manufactured in that defendant had failed to equip the machine with safeguards which would lessen the extent of the injuries which plaintiff suffered when his hands became caught in the rollers. The Court said:
" ' "If the manufacturer does everything necessary to make the machine function properly for the purpose for which it is designed, if the machine is without any latent defect, and if its functioning creates no danger or peril that is not known to the user, then the manufacturer has satisfied the law’s demands. We have not yet reached the state where a manufacturer is under the duty of making a machine accident proof or foolproof. Just as a manufacturer is under no obligation, in order to guard against injury resulting from deterioration, to furnish a machine that will not wear out * * * , so he is under no duty to guard against injury from a patent peril or from a source manifestly dangerous. To illus *314 trate, the manufacturer who makes properly and free of defects, an axe or a buzz saw or an airplane with an exposed propeller, is not to be held liable if one using the axe or buzz saw is cut by it, or if someone working around the airplane comes in contact with the propeller. In such cases, * * * the very nature of the article gives notice and warning of the consequences to be expected, of the injuries to be suffered. In other words, the manufacturer is under no duty to render a machine or other article ’more’ safe — as long as the danger to be avoided is obvious and patent to all. "(Emphasis added.) 95 NE2d 804.
" 'In Stevens v Durbin-Dusco, Inc (Mo, 1964), 337 SW2d 343, the Court, after stating that § 395 of the Restatement sets for the standard of duty, continued:
"' "But the manufacturer is not liable as an insurer, and he is under no obligation to make the product accident proof or foolproof. Stevens v Allis Chalmers Manufacturing Company (1940), 151 Kan 638 (100 P2d 723, 726-727); Campo v Scofield (1950), 301 NY 468 (95 NE2d 802, 804); Yaun v Allis Chalmers Manufacturing Company (1948), 253 Wis 558 (34 NW2d 853, 858). Since practically any product, regardless of its type or design, is capable of producing injury when put to particular uses, 'a manufacturer has no duty so to design his product as to render it wholly incapable of producing injury * * * ’, 1 Hursh, American Law of Products Liability, [Rules Regarding Duty as to Design] § 2:59, p 240. The manufacturer of a butcher knife, cleaver, or axe properly made and free of latent defects and concealed dangers, may not be held liable merely because someone was injured while using the product. Thus, a manufacturer is not liable to a man who while using an iron dumbbell drops it on his foot” (346-347).
" 'See also Poore v Edgar Bros. Co. (1939), 33 Cal App 6 (90 P2d 808).
" 'In Nabkey v Jack Loeks Enterprises, Inc. (1965), 376 Mich 397, the plaintiff was injured while jumping on a trampoline. She appeals from a directed verdict [for defendant]. The Court said, in affirming the trial court, on page 400:
"' "Plaintiff fully understood the nature of the device. *315 She observed others using it. There was nothing an instructor could have said or done which was not readily apparent to her on which, under the circumstances, was not under her sole control.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Walker v. Eagle Press & Equipment Co.
408 F. Supp. 2d 402 (E.D. Michigan, 2005)
Landberg v. Ricoh International
892 F. Supp. 938 (E.D. Michigan, 1995)
Carlson v. Bic Corp.
840 F. Supp. 457 (E.D. Michigan, 1993)
Glittenberg v. Doughboy Recreational Industries
491 N.W.2d 208 (Michigan Supreme Court, 1992)
Raines v. Colt Industries, Inc.
757 F. Supp. 819 (E.D. Michigan, 1991)
Glittenberg v. Doughboy Recreational Industries, Inc
462 N.W.2d 348 (Michigan Supreme Court, 1990)
Anderson Banks v. Iron Hustler Corp.
475 A.2d 1243 (Court of Special Appeals of Maryland, 1984)
Owens v. Allis-Chalmers Corp.
326 N.W.2d 372 (Michigan Supreme Court, 1982)
Gutowski v. M & R Plastics & Coating, Inc.
231 N.W.2d 456 (Michigan Court of Appeals, 1975)
Gellenbeck v. Sears, Roebuck & Co.
229 N.W.2d 443 (Michigan Court of Appeals, 1975)
Dalesio v. Allen-Bradley Co.
64 F.R.D. 554 (W.D. Pennsylvania, 1974)
Fredericks v. General Motors Corp.
211 N.W.2d 44 (Michigan Court of Appeals, 1973)
Coger v. MacKinaw Products Co.
210 N.W.2d 124 (Michigan Court of Appeals, 1973)
Grant v. National Acme Company
351 F. Supp. 972 (W.D. Michigan, 1972)

Cite This Page — Counsel Stack

Bluebook (online)
201 N.W.2d 654, 42 Mich. App. 310, 1972 Mich. App. LEXIS 935, Counsel Stack Legal Research, https://law.counselstack.com/opinion/jennings-v-tamaker-corp-michctapp-1972.