J. F. Equipment, Inc. v. Owatonna Manufacturing Co.

494 N.E.2d 516, 143 Ill. App. 3d 208, 98 Ill. Dec. 394, 1986 Ill. App. LEXIS 2184
CourtAppellate Court of Illinois
DecidedApril 22, 1986
Docket85-0062
StatusPublished
Cited by15 cases

This text of 494 N.E.2d 516 (J. F. Equipment, Inc. v. Owatonna Manufacturing Co.) is published on Counsel Stack Legal Research, covering Appellate Court of Illinois primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
J. F. Equipment, Inc. v. Owatonna Manufacturing Co., 494 N.E.2d 516, 143 Ill. App. 3d 208, 98 Ill. Dec. 394, 1986 Ill. App. LEXIS 2184 (Ill. Ct. App. 1986).

Opinion

JUSTICE STROUSE

delivered the opinion of the court:

The plaintiff, a dealer of light construction equipment, sued the manufacturer of the equipment and a competing dealer in a two-count complaint. Count I was for breach of the plaintiff’s dealership contract with the manufacturer, and count II was for conspiracy to breach the dealership contract. The competitor settled its claims with plaintiff for $7,500 before trial. The jury found the manufacturer guilty of conspiracy (count II) to breach a contract, but made no finding as to count I. The jury awarded $64,000 compensatory damages and $159,000 punitive damages. The trial court entered judgment on the verdict and, after defendant’s post-trial motions were denied, the manufacturer appealed.

The plaintiff, J. E Equipment, Inc. (J.F.), is an Illinois corporation which is a dealer of light construction equipment. The defendant, Owatonna Manufacturing Company, Inc. (OMC), is a Minnesota corporation which manufactures, among other things, a line of four-wheel-drive end loaders (called Mustangs), which comes in eight or nine different models, ranging in price from $6,000 to $60,000.

Prior to starting J.F., Joseph Fiorenza was vice-president and general manager of Fiorenza Material Handling Company (FMH). Through his efforts with FMH, Fiorenza became a top Clark Manufacturing Company Bobcat line salesman. Bobcat end loaders are virtually identical to Mustangs. FMH was the Bobcat dealer for approximately 3V2 years. Bobcat terminated FMH’s dealership, due to personality conflicts between FMH’s president (Joseph Fiorenza’s brother) and Bobcat’s territorial sales representative. After losing the Bobcat distributorship, FMH took on OMC’s Mustang line in 1977. Due to internal FMH restructuring, Fiorenza was transferred to an inside management position. Because Fiorenza was inside, FMH sales of the OMC line were minimal. Explaining his desire to go into business for himself, Fiorenza negotiated with his brother, and they agreed to trade Fiorenza’s 20% ownership in FMH for the OMC inventory in stock at FMH. For his exchange of stock, Fiorenza received $6,000 in parts, one used Bobcat, one used Mustang, and three new Mustangs. FMH agreed to allow J.F. to operate from the premises of FMH, utilizing its parts department and certain personnel.

On July 14, 1980, Joseph Fiorenza, president of J. F. Equipment, Inc., contacted OMC’s territorial sales manager, Richard Collins, proposing that J.F. become the Rockford area OMC dealer. Collins was very receptive to the idea, and on August 20, Collins and Fiorenza flew to OMC’s Minnesota offices. While preliminary concerns were expressed about Fiorenza’s support staff, location and financial strength, OMC’s regional sales manager, credit manager and warranty manager approved of Fiorenza’s proposal. After leaving Owatonna, Fiorenza and Collins entered into a verbal agreement for Fiorenza to be an OMC dealer in the Rockford area. On September 1, 1980, Collins notified the OMC main office of this contract.

The terms of the contract were disputed by the parties. Fiorenza testified that the contract was for a one-year minimum term wherein he would be the exclusive dealer of the OMC full line for the Rockford area and that the dealership contract could not be terminated at will. It would be automatically renewed annually unless OMC terminated it for cause. Fiorenza noted that a termination for cause could occur through (1) obvious financial default; (2) by failing to adequately market the product; or (3) failing to purchase equipment from OMC. Collins testified that OMC does not grant either exclusive or set term dealerships. OMC’s regional sales manager testified that he had no knowledge of an exclusive dealership, but that if one were proposed, the corporation would not have approved it. He further testified that many cities have more than one dealer.

On September 15, 1980, Fiorenza submitted credit applications and received a standard credit agreement from OMC. While this credit agreement was terminable by 30 days’ prior written notice, the termination of the credit agreement contained language anticipating it would continue for a one-year term. Fiorenza had already sold one end loader.

While Fiorenza’s operation was getting underway, the Eighmy Equipment Company (EEC), a competing distributor of several lines of light and heavy construction equipment, was notified by Clark Manufacturing that it was terminating EEC’s Bobcat dealership. EEC had marketed Bobcat equipment in the Rockford, Peoria and Decatur areas. In order to prevent loss of sales and service staff essential to an ongoing construction equipment sales business, Eighmy needed, and determined to get, an OMC dealership as quickly as possible for all three areas.

In October, Eighmy made several telephone calls to OMC’s regional sales manager in Minnesota and asked him to consider the possibility of EEC becoming the OMC dealer in Peoria, Rockford and Decatur. The OMC regional manager informed Eighmy that J.E was the existing dealer in Rockford, but that he would instruct his territorial manager to contact Eighmy. Collins and Eighmy had two or three conversations in October and early November. Eighmy testified that at some point during these discussions the existing Rockford dealership was discussed. Collins acknowledged these conversations and testified that he made it very clear to Eighmy that Rockford had a dealer and that the subject was closed as to an EEC dealership in Rockford.

On November 6, 1980, a contingent of EEC sales persons flew to Minnesota with Collins and Eighmy. It was explained during these conversations that OMC had dealers in Peoria and Decatur who were not performing, but Eighmy was not made aware of any problems in Rockford. From a general business standpoint, it was Eighmy’s practice to negotiate for exclusive industrial territory. This meant that while he would not be concerned with dealers of the same manufacturer dealing in farm or agricultural equipment, he would be concerned if OMC had another industrial dealer in his vicinity. Collins also testified that it would be impossible to have two full-line, industrial dealerships in Rockford.

Collins testified that on November 21, 1980, he and Eighmy had a meeting documented on a “dealer call report.” A dealer call report is a document prepared by a territorial sales manager to document each visit with the dealer. If there was another call report in this dealer’s file, the manager would customarily use the date from the top of the preceding call report for the date of the last call on the current call report. Collins’ call report of December 15, 1980, documented the November 21 meeting with Eighmy as the date of his last call. Neither Collins nor OMC could produce that actual call report for November 21, which would indicate what discussions took place on that date.

Two days later, on November 23, Collins met with Fiorenza and informed him that OMC was cancelling the J.F. dealership. He wrote a dealer call report documenting the cancellation due to (1) lack of performance; (2) poor market penetration; (3) dilution of sales effort (advertising rebuilt machines of competitors); and (4) prospects for a better performance with a new dealer. To substantiate the first two reasons for cancelling the dealership, Collins testified that J.F. had sold only one OMC machine since the beginning of the dealership.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Philippou Eye Associates, Ltd. v. Pill
2022 IL App (2d) 210324 (Appellate Court of Illinois, 2022)
Horwitz v. Sonnenschein Nath & Rosenthal
2018 IL App (1st) 161909 (Appellate Court of Illinois, 2018)
Ertl v. City of DeKalb
2013 IL App (2d) 110199 (Appellate Court of Illinois, 2013)
Star Charters v. Figueroa
733 N.E.2d 1282 (Illinois Supreme Court, 2000)
Burgess v. Abex Corp.
712 N.E.2d 939 (Appellate Court of Illinois, 1999)
Baldwin v. Twin Rivers Club
636 N.E.2d 1024 (Appellate Court of Illinois, 1994)
Kipnis v. Meltzer
625 N.E.2d 320 (Appellate Court of Illinois, 1993)
Roberts v. Norfolk and Western Railway Co.
593 N.E.2d 1144 (Appellate Court of Illinois, 1992)
Klier v. Siegel
558 N.E.2d 583 (Appellate Court of Illinois, 1990)
Board of Education v. Zando, Martin & Milstead, Inc.
390 S.E.2d 796 (West Virginia Supreme Court, 1990)
Gilman v. Kessler
548 N.E.2d 1371 (Appellate Court of Illinois, 1989)
Siegel v. Levy Organization Development Co.
538 N.E.2d 715 (Appellate Court of Illinois, 1989)

Cite This Page — Counsel Stack

Bluebook (online)
494 N.E.2d 516, 143 Ill. App. 3d 208, 98 Ill. Dec. 394, 1986 Ill. App. LEXIS 2184, Counsel Stack Legal Research, https://law.counselstack.com/opinion/j-f-equipment-inc-v-owatonna-manufacturing-co-illappct-1986.