In Re National Steel Corp.

316 B.R. 287, 53 Collier Bankr. Cas. 2d 1069, 2004 Bankr. LEXIS 1639, 43 Bankr. Ct. Dec. (CRR) 224, 2004 WL 2403587
CourtUnited States Bankruptcy Court, N.D. Illinois
DecidedOctober 26, 2004
Docket19-05778
StatusPublished
Cited by19 cases

This text of 316 B.R. 287 (In Re National Steel Corp.) is published on Counsel Stack Legal Research, covering United States Bankruptcy Court, N.D. Illinois primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
In Re National Steel Corp., 316 B.R. 287, 53 Collier Bankr. Cas. 2d 1069, 2004 Bankr. LEXIS 1639, 43 Bankr. Ct. Dec. (CRR) 224, 2004 WL 2403587 (Ill. 2004).

Opinion

MEMORANDUM OPINION

JOHN H. SQUIRES, Bankruptcy Judge.

This matter comes before the Court on the motion of Hayes-Lemmerz International, Inc. (the “Creditor”) for allowance and payment of a Chapter 11 administrative expense pursuant to 11 U.S.C. § 503(b)(1)(A) from the bankruptcy estates of National Steel Corporation and its related debtor entities (“National Steel”). For the reasons set forth herein, the Court denies the motion.

I. JURISDICTION AND PROCEDURE

The Court has jurisdiction to entertain this matter pursuant to 28 U.S.C. § 1334 and Internal Operating Procedure 15(a) of the United States District Court for the Northern District of Illinois. It is a core proceeding under 28 U.S.C. § 157(b)(2)(A), (B) and (0).

II. FACTS, BACKGROUND AND TESTIMONY ADDUCED AT TRIAL 1

The Creditor is a Delaware corporation with its principal place of business located in Northville, Michigan. Proposed Findings from Creditor at ¶ 1; Proposed Findings from National Steel at ¶8. The Creditor operates several manufacturing facilities, including a steel wheel manufacturing plant in Sedalia, Missouri. Trial Tr. at 13. The Creditor manufactures and sells wheels for use on passenger vehicles and light trucks to original equipment manufacturers in the automotive industry (“OEMs”), such as the Creditor’s major customers, Ford Motor Company (“Ford”) and General Motors Corporation (“GM”). Id. at 14, 16. On December 5, 2001, the Creditor filed a voluntary Chapter 11 *293 bankruptcy petition in Delaware. 2 Id. at 30.

At all times relevant to the instant motion, National Steel was a Delaware corporation with its principal place of business located in Mishawaka, Indiana. Proposed Findings from National Steel at ¶-A. National Steel supplies steel to entities like the Creditor. Trial Tr. at 14. National Steel was the Creditor’s supplier for large volumes of certain, specialized steel from which it fabricated the wheels for the OEMs. Id. at 22.

In the automotive industry, suppliers like the Creditor that provide component parts to OEMs are referred to as “Tier 1” suppliers. Proposed Findings from Creditor at ¶ 5. Suppliers like National Steel that provide products to Tier 1 suppliers are commonly referred to as “Tier 2” suppliers. Id. OEMs require that all parts supplied by Tier 1 suppliers meet certain specifications for quality, durability and safety. Trial Tr. at 20. To that end, a Tier 1 supplier must go through a lengthy testing and approval process for each part that it supplies to an OEM. Id. at 20-21. This process is commonly known as the “pre-production approval process” or “PPAP.” Id. The PPAP is particularly stringent when the Tier 1 supplier is providing a “safety critical” part to the OEM. Id. In that situation, the materials that the Tier 1 supplier buys from the Tier 2 supplier for use in the safety critical part must also be tested and approved through the PPAP. Id. at 21. The PPAP can take anywhere from six to twelve months. Id. Wheels for use on passenger vehicles and light trucks are considered safety critical parts. Id. at 20, 25; Gonzales Dep. at 27. For that reason, a Tier 1 supplier like the Creditor that supplies a steel wheel to an OEM like Ford or GM must include in its PPAP the testing and approval of all of the steel supplied by the Tier 2 supplier like National Steel for the manufacture of the wheel. Proposed Findings from Creditor at ¶ 8.

Typically, OEMs do not maintain any significant reserve on hand or inventory of component parts like wheels. Trial Tr. at 25. Thus, Tier 1 suppliers are required to supply parts to OEMs on a “just in time” basis. Id. The failure on the part of a Tier 1 supplier to deliver those parts on time to an OEM can cause a host of problems for both the Tier 1 supplier and the OEM, including a slowdown or halt in the production of vehicles, which can have a devastating financial impact on both parties. Id. at 26-28. The shutdown of an automotive plant can be catastrophic for a Tier 1 supplier. Salliotte Dep. at 23. Further, an OEM whose Tier 1 supplier causes it to slow or halt production may impose back-charges against it and refuse to award future contracts to that supplier. Trial Tr. at 26. Such a loss of current and future business can financially ruin a Tier 1 supplier. Id.

In the event that a Tier I supplier fails to deliver parts, an OEM may “off-line” vehicles or install certain “slave” wheels on vehicles until the proper parts are delivered, in lieu of halting production. Id. at 26-27. In the event an OEM slows or halts production, it can incur significant damages as a result of its inability to produce vehicles. Id. at 26-29. If such a situation occurs, the OEM may seek reimbursement from the Tier 1 supplier whose failure to deliver parts caused the OEM to slow or halt production. Id. In fact, in 2002, the Creditor was required to pay *294 Ford approximately $3,000,000.00 as the result of its failure to make timely delivery to Ford. Id. at 27-29.

It is undisputed that the Creditor and National Steel had a multi-year history of annual supply contracts under which National Steel sold steel to the Creditor that the Creditor then used to manufacture wheels for its OEM customers. On October 25, 2001, National Steel provided the Creditor with a Price Proposal and Supply Guidelines for 2002 (the “Price Proposal”) for the sale of steel from National Steel to the Creditor for the period from January 1, 2002 through December 31, 2002. Creditor Ex. No. 1. The Price Proposal quoted prices and payment terms for the sale of steel. Id. Pursuant thereto the Creditor delivered Purchase Order No. 276913 (the “Purchase Order”) to National Steel in response to the Price Proposal. Creditor Ex. No. 2. The Purchase Order: (1) described the particular steel that the Creditor intended to purchase from National Steel during the duration of the Price Proposal; (2) identified the unit price for each particular type of steel that the Creditor intended to purchase from National Steel during the duration of the Price Proposal; and (3) provided that “[t]he terms and conditions applicable to this purchase order are those terms and conditions in effect on the date of this purchase order and located on the company’s web site, www. Hayes-Lemmerz.com.” (the “Terms and Conditions”). Id.; Trial Tr. at 24.

Paragraph 2 of the Terms and Conditions, in turn, stated in relevant part that “[t]he Purchase Order is the entire agreement between the Parties respecting the Products and no modification of the Purchase Order shall be effective unless in writing and signed by an authorized representative of [the Creditor]....

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Ebert v. Gecker
N.D. Illinois, 2022
In re Riley
577 B.R. 497 (W.D. Louisiana, 2017)
In re Walsh
538 B.R. 466 (N.D. Illinois, 2015)
Hensley v. Pace Airlines, Inc. (In re Pace Airlines, Inc.)
483 B.R. 306 (M.D. North Carolina, 2012)
In re Marotta
479 B.R. 681 (M.D. North Carolina, 2012)
In re 211 Waukegan, LLC
479 B.R. 771 (N.D. Illinois, 2012)
In Re Eckberg
446 B.R. 909 (C.D. Illinois, 2011)
Bertram Communications LLC v. Netwurx, Inc.
433 B.R. 719 (E.D. Wisconsin, 2010)
Paloian v. GRUPO SERLA SA DE CV
433 B.R. 19 (N.D. Illinois, 2010)
In Re Renaissance Residential of Countryside, LLC
423 B.R. 848 (N.D. Illinois, 2010)
In Re Michalek
393 B.R. 642 (E.D. Wisconsin, 2008)
In Re Hackney
351 B.R. 179 (N.D. Alabama, 2006)
In Re Dynamic Tooling Systems, Inc.
349 B.R. 847 (D. Kansas, 2006)
Restaurant Co. v. United Leasing Corp.
628 S.E.2d 520 (Supreme Court of Virginia, 2006)

Cite This Page — Counsel Stack

Bluebook (online)
316 B.R. 287, 53 Collier Bankr. Cas. 2d 1069, 2004 Bankr. LEXIS 1639, 43 Bankr. Ct. Dec. (CRR) 224, 2004 WL 2403587, Counsel Stack Legal Research, https://law.counselstack.com/opinion/in-re-national-steel-corp-ilnb-2004.