Fujian MacHinery & Equipment Import & Export Corp. v. United States

178 F. Supp. 2d 1305, 25 Ct. Int'l Trade 1150, 25 C.I.T. 1150, 23 I.T.R.D. (BNA) 2126, 2001 Ct. Intl. Trade LEXIS 121
CourtUnited States Court of International Trade
DecidedSeptember 28, 2001
DocketSLIP OP. 01-120; 99-08-00532
StatusPublished
Cited by39 cases

This text of 178 F. Supp. 2d 1305 (Fujian MacHinery & Equipment Import & Export Corp. v. United States) is published on Counsel Stack Legal Research, covering United States Court of International Trade primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Fujian MacHinery & Equipment Import & Export Corp. v. United States, 178 F. Supp. 2d 1305, 25 Ct. Int'l Trade 1150, 25 C.I.T. 1150, 23 I.T.R.D. (BNA) 2126, 2001 Ct. Intl. Trade LEXIS 121 (cit 2001).

Opinion

OPINION

GOLDBERG, Judge.

In this action, the Court considers plaintiffs’ challenges to the final results of the Department of Commerce (“Commerce”) for the seventh administrative review of the antidumping duty order on heavy forged hand tools (“HFHTs”). See Heavy Forged Hand Tools, Finished or Unfinished, With or Without Handles, From the People’s Republic of China; Final Results and Partial Recission of Antidumping Duty Admin. Reviews, 64 Fed. Reg. 43,659 (August 11,1999) (“Final Results”). Plaintiffs Fujian Machinery and Equipment Import & Export Corporation (“FMEC”) and Shandong Machinery Import & Export Corporation (“SMC”) argue that: (1) Commerce erred in determining that there was a total failure of verification at FMEC, SMC, and two of the supplier factories; (2) Commerce erred by denying plaintiffs’ claims for separate company-specific dumping margin rates; and (3) Commerce acted unlawfully by using facts available, *1309 and in particular by applying adverse inferences, on the basis of alleged verification failures and subsequently discovered unreported sales.

The Court exercises jurisdiction over this matter pursuant to 28 U.S.C. § 1581(c) (1994).

BACKGROUND

On March 23, 1998, Commerce initiated the seventh administrative review of HFHTs. Initiation of Antidumping and Countervailing Duty Admin. Reviews, 63 Fed.Reg. 13,837 (March 23, 1998). With respect to the People’s Republic of China (“PRC”), the review covered axes/adzes, bars/wedges, hammers/sledges, and picks/mattocks. Id. Commerce issued an initial set of questionnaires to plaintiffs on April 23, 1998. Supplemental questionnaires followed for SMC on August 7, 1998, for FMEC on August 10, 1998, and for both companies on September 15,1998. SMC and FMEC timely responded to all questionnaires.

On September 24, 1998, Commerce faxed the verification outlines for SMC and FMEC to the Washington office of plaintiffs’ counsel. Verification began at FMEC the morning of October 5, 1998, and lasted two days. Subsequently, Commerce conducted verification at SMC October 8-9, 1998, and at two of the plaintiffs’ suppliers’ factories the following week: [ ], termed “Factory A” by Commerce, on October 12-13, 1998; and [ ], termed “Factory B” by Commerce, on October 14-15, 1998 (collectively, the “Factories”).

On January 29, 1999, Commerce issued an internal memorandum determining that FMEC, SMC, 1 Factory A, and Factory B had each failed verification. See App. (“Pis.’ App.”) to Pis.’ Mot. for J. upon the Agency R. (“Pis.’ Memo”) 8, Determination of Adverse Facts Available Based on Verification Failure in the Admin. Review of HFHTs from the PRC (“AFA Memo”). On February 9, 1999, FMEC’s counsel wrote to Commerce requesting an opportunity to provide information that the memorandum had identified as unavailable during FMEC’s verification. See Pis.’ App. 9, Heavy Forged Hand Tools From the PRC — Clarification of Verification (“FMEC’s Add’l Submissions Letter”). On February 26, 1999, Commerce denied this request as untimely. See Pis.’ App. 10, Antidumping Duty Admin. Review of HFHTs from the PRC (1997-1998) (“Commerce’s Add’l Submissions Letter”).

On February 5, 1999, Commerce published the preliminary results of the anti-dumping review. Heavy Forged Hand Tools, Finished or Unfinished, With or Without Handles, From the PRC; Preliminary Results and Partial Recission of Antidumping Duty Admin. Reviews, 64 Fed.Reg. 5,770 (February 5, 1999) (“Preliminary Results” ). In the Preliminary Results, Commerce determined that sales of HFHTs from the PRC were made at less than fair value during the period of review, February 1, 1997, through January 31, 1998. Id. With respect to both FMEC and SMC, Commerce stated that “serious problems” at verification made it impossible to confirm that U.S. sales for either company were properly reported. Id. at 5,771. Commerce further determined that “the nature of the verification failures of both companies and the inadequacy of their cooperation” was such that neither FMEC nor SMC had established that it was entitled to a separate, company-specific rate, rather than the government-entity rate otherwise applicable to exporters in non-market economies that fail to demonstrate an absence of government control *1310 over their export activities. Id. at 5,772. Finally, Commerce concluded that the non-responsiveness of the PRC’s Ministry of Foreign Trade and Economic Cooperation (“MOFTEC”), as well as the verification failures of FMEC and SMC, demonstrated that the “PRC entity” (including FMEC and SMC) had failed to cooperate to the best of its ability, and that application of adverse facts available (“AFA”) under 19 U.S.C. § 1677e(b) (1994) was therefore appropriate. Id.

On April 22, 1999, Commerce informed FMEC and SMC that a review by the U.S. Customs Service had disclosed several unreported sales of bars/wedges by both companies. FMEC and SMC filed comments explaining these unreported sales on May 10, 1999. See Pis.’ App. 11, Heavy Forged Hand Tools From China (“Pis.’ Unreported Sales Letter”). On August 3, 1999, Commerce issued a memorandum rejecting plaintiffs’ explanations. See Pis.’ App. 12, Antidumping Duty Admin. Review of HFHTs from the PRC (1997-1998) — Unreported Sales (“Commerce’s Unreported Sales Letter”).

On August 11, 1999, Commerce published the Final Results, in which it again determined that FMEC, SMC, and their suppliers’ factories failed verification; that neither FMEC nor SMC warranted a separate rate; and that the application of AFA was appropriate. See 64 Fed.Reg. at 43,-661-69. Commerce assigned FMEC and SMC the following PRC-wide dumping margins: for axes/adzes, 18.72%; for bars/wedges, 47.88%; for hammers/sledges, 27.71%; and for picks/mattocks, 98.77%. Id. at 43,672.

STANDARD OF REVIEW

The Court will sustain Commerce’s Final Results unless they are “unsupported by substantial evidence on the record, or otherwise not in accordance with law.” 19 U.S.C. § 1516a(b)(l)(B)(i) (1994). Substantial evidence is “more than a mere scintilla. It means such relevant evidence as a reasonable mind might accept as adequate to support a conclusion.” Consolidated Edison Co. v. NLRB, 305 U.S. 197, 229, 59 S.Ct. 206, 83 L.Ed. 126 (1938); accord Matsushita Elec. Indus. Co., Ltd. v. United States, 3 Fed. Cir. (T) 44, 51, 750 F.2d 927, 933 (1984).

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Pro-Team Coil Nail Enter., Inc. v. United States
483 F. Supp. 3d 1242 (Court of International Trade, 2020)
Jiangsu Jiasheng Photovoltaic Technology Co. v. United States
28 F. Supp. 3d 1317 (Court of International Trade, 2014)
Clearon Corp. v. United States
2014 CIT 88 (Court of International Trade, 2014)
Since Hardware Co., Ltd. v. United States
2011 CIT 146 (Court of International Trade, 2011)
Seah Steel Corp. v. United States
704 F. Supp. 2d 1353 (Court of International Trade, 2010)
Washington Int'l Ins. Co. v. United States
34 Ct. Int'l Trade 171 (Court of International Trade, 2010)
Washington International Insurance v. United States
34 Ct. Int'l Trade 171 (Court of International Trade, 2010)
Jtekt Corporation v. United States
675 F. Supp. 2d 1206 (Court of International Trade, 2009)
Qingdao Taifa Group Co., Ltd. v. United States
637 F. Supp. 2d 1231 (Court of International Trade, 2009)
Arch Chemicals, Inc. v. United States
33 Ct. Int'l Trade 954 (Court of International Trade, 2009)
Huvis Corp. v. United States
570 F.3d 1347 (Federal Circuit, 2009)
Gallant Ocean (Thailand) Co., Ltd. v. United States
602 F. Supp. 2d 1337 (Court of International Trade, 2009)
Huvis Corp. v. United States
32 Ct. Int'l Trade 845 (Court of International Trade, 2008)
China Processed Food Import & Export Co. v. United States
536 F. Supp. 2d 1347 (Court of International Trade, 2008)
Royal Thai Government v. United States
502 F. Supp. 2d 1334 (Court of International Trade, 2007)
Mittal Steel Galati S.A. v. United States
502 F. Supp. 2d 1295 (Court of International Trade, 2007)
Skf USA Inc. v. United States
491 F. Supp. 2d 1354 (Court of International Trade, 2007)
Husteel Co., Ltd. v. United States
491 F. Supp. 2d 1283 (Court of International Trade, 2007)
Shandong Huarong MacHinery Co. v. United States
31 Ct. Int'l Trade 30 (Court of International Trade, 2007)
Equal Access for El Paso, Inc. v. Hawkins
428 F. Supp. 2d 585 (W.D. Texas, 2006)

Cite This Page — Counsel Stack

Bluebook (online)
178 F. Supp. 2d 1305, 25 Ct. Int'l Trade 1150, 25 C.I.T. 1150, 23 I.T.R.D. (BNA) 2126, 2001 Ct. Intl. Trade LEXIS 121, Counsel Stack Legal Research, https://law.counselstack.com/opinion/fujian-machinery-equipment-import-export-corp-v-united-states-cit-2001.