Forbro Design Corporation v. Raytheon Company, Forbro Design Corporation v. Raytheon Company

532 F.2d 758, 190 U.S.P.Q. (BNA) 49, 1976 U.S. App. LEXIS 12262
CourtCourt of Appeals for the First Circuit
DecidedMarch 22, 1976
Docket75-1151 and 75-1152
StatusPublished
Cited by21 cases

This text of 532 F.2d 758 (Forbro Design Corporation v. Raytheon Company, Forbro Design Corporation v. Raytheon Company) is published on Counsel Stack Legal Research, covering Court of Appeals for the First Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Forbro Design Corporation v. Raytheon Company, Forbro Design Corporation v. Raytheon Company, 532 F.2d 758, 190 U.S.P.Q. (BNA) 49, 1976 U.S. App. LEXIS 12262 (1st Cir. 1976).

Opinion

LEVIN H. CAMPBELL, Circuit Judge.

Forbro Design Corporation appeals from a judgment of the district court, 390 F.Supp. 794 (D.Mass.1975), dismissing its patent infringement action against Ray-theon Company on the ground that Forbro’s patent, No. 3,028,538 (more particularly its claims 1-4) was obvious under 35 U.S.C. § 103. Raytheon cross-appeals from the court’s dismissal of Raytheon’s counterclaim alleging that Forbro had violated the antitrust laws in its use of the patent, and from the court’s rejection of its affirmative defenses other than obviousness and of its claim for attorneys’ fees. 1

The patent in suit was applied for on August 4, 1958, by Aaron Rosenfeld and Kenneth Kupferberg and issued on April 3,. 1962. Thereafter it was assigned to Forbro, of which Dr. Kupferberg is a principal. Though the original patent had seven claims, Raytheon is only charged with infringing claims 1-4.

The patent is for a transistorized power supply circuit providing direct current voltage that is automatically regulated to remain constant. Sophisticated electronic gear, such as computers, require exceedingly accurate and stable sources of power. To meet their needs, circuits like the patented circuit were developed that even out fluctuations in the voltage coming from an unregulated source.

Through Forbro’s parent company, Kep-co, Inc., Kenneth Kupferberg, the inventor, a physicist, and his three brothers, have manufactured regulated power supplies of their own design since the 1940’s. Up to the time of the patented circuit, their power supplies employed vacuum tubes, but by late 1956, transistors were economically feasible, and Dr. Kupferberg became interested in developing transistorized power supplies. Although transistors were well known after the early 1950’s and Kupfer-berg was not the first to apply them to power supplies, they had been too costly before the mid-50’s for use in most commercial circuits.

On March 1, 1957, Kupferberg hired Robert Moog, a young engineer with some background in transistors, to assist him in developing a transitorized power supply. Moog was instructed that they had only *760 four or five months to design and build a marketable model, and this schedule was met. Proceeding from Kepco’s previously developed vacuum tube models, especially Model 2600, Moog in consultation with Kup-ferberg 2 engineered the patented circuit, allegedly by June 7, 1957. Kupferberg is said to have sketched the basic concept in early March, though whether by March 16 as stated in certain interference papers or at another time is unclear.

The alleged invention is a “combination” invention — that is, the design of the circuit, not any novelty in its components, is what is claimed to be unique. In 1957 all the basic ingredients were well known. The circuit employs a control-amplifier, a device which compares variations in output voltage against a stable reference voltage, and reacts to any inequality by developing a control voltage that is used to restore equality. It also employs a series-pass device which, reacting to the correction from the control amplifier, varies its resistance in such a manner as to offset and balance the change in the dc output voltage. Dr. Kup-ferberg testified that from 1948 on Kepco manufactured power supplies capable of regulating all necessary voltages and employing series-pass elements and a reference.

The patented circuit was conceived, according to Dr. Kupferberg, with several objectives. One was the minimization of voltage across the control amplifier and the dissipation of energy in the series-pass device. Another was to achieve a “universal” circuit — one that could use the same control amplifier and the same components with different output voltages. Previous devices, due in part to the fact that higher voltages were required to operate the vac-cum tubes, had had to be designed specifically for different voltage ranges. Dr. Kupferberg testified that the key to achieving his objectives was the patented way of interconnecting the transitorized components. A model utilizing the new circuit was displayed publicly in August, 1957. The basic concept has since been embodied in thousands of units produced commercially by Kepco, and has been employed by others, including Raytheon.

The utility of the circuit is not questioned. What is questioned, by Raytheon, is whether designing the circuit required more skill or knowledge than one might expect of qualified persons presented with the opportunity to use transistors and having Kup-ferberg’s aims in mind.

Forbro claims that Kupferberg’s insight led to “a new theory of design”, and it points especially to the connection of one input terminal of the control amplifier, one terminal of the load circuit, one terminal of the reference voltage, and one terminal of the series-pass device at a common point, terminal 21 in the patent. This arrangement is said to permit a very small reference voltage and to keep the voltage across the control amplifier very low. Thus 1000 volts can be controlled by a reference of but one or two volts. Forbro contends that this basic design, featuring great flexibility and simplicity, has been used without change ever since it was developed, demonstrating its unique value.

The district court found that the only prior art cited in the patent was Chase, U.S. Patent No. 2,751,549, and that neither party raised this as pertinent at trial. Instead, attention at trial focused particularly upon U.S. Patent No. 2,840,777 (“DeBlasio”) 3 which, Raytheon claimed, fully anticipated *761 the patent in suit. Raytheon also contends that appellant’s own unpatented Model 2600, using tubes, largely anticipated the patent circuit.

The court found that circuitry revealed in DeBlasio was not identical, so as to render the patent in suit void under § 102. However, it concluded that the teaching of De-Blasio, added to what would have been known to one with ordinary skill in the art in 1957, would have enabled the designing of a “common point” and standardized control amplifier, two principal advantages claimed for the patented circuit. A third claimed advantage, the low voltage reference, was held not to have been a significant aim of the inventor. The court stated that while the patent in suit had enjoyed commercial success, there was no showing that it solved a problem that had remained unsolved.

“There was evidence that other power supply manufacturers were engaged in the transistorization of power supplies and the stipulations in Appendix ‘B’ reveal that the technology to arrive at the answers contained in the patent was available in the prior art.” 390 F.Supp. at 802.

The court accordingly held the patent invalid for obviousness under 35 U.S.C. § 103.

35 U.S.C. § 103 provides that a patent may not be obtained, even though the invention is not disclosed or otherwise anticipated under § 102,

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cmi Corporation v. Barber-Greene Company
683 F.2d 1061 (Seventh Circuit, 1982)
K & M Joint Venture v. Smith International, Inc.
669 F.2d 1106 (Sixth Circuit, 1982)
Kimberly-Clark Corp. v. Eastern Fine Paper, Inc.
559 F. Supp. 815 (D. Maine, 1981)
United States v. FMC Corp.
514 F. Supp. 1166 (E.D. Pennsylvania, 1981)
Carter-Wallace, Inc. v. Gillette Co.
531 F. Supp. 840 (D. Massachusetts, 1981)
James A. McKinnon v. Skil Corporation
638 F.2d 270 (First Circuit, 1981)
Reynolds Metals Co. v. Aluminum Co. of America
457 F. Supp. 482 (N.D. Indiana, 1978)
Avant Incorporated v. Polaroid Corporation
441 F. Supp. 898 (D. Massachusetts, 1977)
Hans Oetiker v. Jurid Werke, G. M. B. H
556 F.2d 1 (D.C. Circuit, 1977)
Karl Isac Joel Rosen v. Lawson-Hemphill, Inc.
549 F.2d 205 (First Circuit, 1976)

Cite This Page — Counsel Stack

Bluebook (online)
532 F.2d 758, 190 U.S.P.Q. (BNA) 49, 1976 U.S. App. LEXIS 12262, Counsel Stack Legal Research, https://law.counselstack.com/opinion/forbro-design-corporation-v-raytheon-company-forbro-design-corporation-v-ca1-1976.