Curcio v. Caterpillar, Inc.

543 S.E.2d 264, 344 S.C. 266
CourtCourt of Appeals of South Carolina
DecidedFebruary 26, 2001
Docket3307
StatusPublished
Cited by8 cases

This text of 543 S.E.2d 264 (Curcio v. Caterpillar, Inc.) is published on Counsel Stack Legal Research, covering Court of Appeals of South Carolina primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Curcio v. Caterpillar, Inc., 543 S.E.2d 264, 344 S.C. 266 (S.C. Ct. App. 2001).

Opinions

GOOLSBY, Judge:

A jury awarded Pamela C. Curcio, as Personal Representative of the Estate of Dennis M. Turner, $500,000 in a wrongful death action against Caterpillar, Inc. The trial court later set the verdict aside and dismissed the complaint. Curcio appeals. We affirm.

BACKGROUND

Turner worked as a heavy-equipment mechanic for Blanchard Machinery Company in Simpsonville, South Carolina. On March 23, 1994, he was crushed to death while performing maintenance on a Caterpillar 953 Track Loader.

[269]*269The Caterpillar 953 Track Loader operates on a series of hydraulic pumps. The cab of the loader is located over the engine and pumps. To remove the engine for repairs, the cab must be tilted forward. The Caterpillar Disassembly & Assembly Manual gives instructions for tilting the cab to either 24 degrees or 90 degrees. At either, position, the cab is bolted to the frame of the machine to hold it in place, and brace bars are provided for this purpose. If the cab is not bolted to the frame, it is chained to the front implement of the machine.

According to the manual, the engine can be started when the cab is tilted to 24 degrees, but the transmission stays in a neutral position. In contrast, the manual has the following warning for tilting the cab to 90 degrees:

Do not start the engine when the cab/ROPS/platform1 is at 90°. The governor control, implement hydraulics, speed-direction and speed-brake linkages are disconnected when the cab/ROPS/platform is tilted to 90°. If the valve spools were moved either accidentally or intentionally when the linkages were disconnected, uncontrolled lift arm and/or track movement will occur when the engine is started. As a result, it is possible for the brace group which retains the cabs/ROPS/platform to fail. This can result in severe injury to a serviceman or to bystanders and/or damage to the machine.
If the engine must be started, first, lower the cab to 24° reconnect to the hydraulic jack, and install the support bracket....

(Boldface in original.) In addition, a warning in boldface print appears near the beginning of the manual advising service personnel to “[disconnect batteries before performance of any service work.”

As noted in the manual, various warnings appear on the loader itself. Located adjacent to where the brace is bolted to the frame when the loader is tilted to 24 degrees is the following alert:

WARNING

PERSONAL INJURY CAN OCCUR IF IMPROPER PLATFORM TILTING PROCEDURES ARE USED. SEE [270]*270MAINTENANCE GUIDE FOR PROCEDURE TO TILT PLATFORM TO THE 24° POSITION.

• Before raising platform, remove control linkage pins to prevent damage to the linkage.
• Install platform support link properly before any work is done on or under the raised platform to ensure it will not fall.
• Reinstall and properly tighten the ROPS mounting bolts to prevent reduction of rollover protection.

SEE SERVICE MANUAL PROCEDURE TO TILT PLATFORM TO THE 90° POSITION. DO NOT RUN THE ENGINE WITH THE PLATFORM TILTED TO THE 90° POSITION. LIFT ARMS MAY RAISE AND COULD BREAK PLATFORM 90° SUPPORT BRACKET AND PLATFORM WILL FALL.

(Boldface in original, underlining added.)

To remove the engine for repairs, Turner had the cab tilted to an angle greater than 90 degrees so that it rested on the tilt cylinders in a “laid-over” position. Although Caterpillar did not include this procedure in the manual, several mechanics testified that they chose to use it because it appeared less precarious than the 90-degree position and required less time. Dr. Jeffrey Warren, Curcio’s mechanical engineering expert witness, testified that, in the 90-degree position, the 1,933-pound cab is held in place by only the installation of a small bracket with a single bolt. In contrast, Warren testified that 1,148 pounds of force would be necessary to pick up the cab from its laid-over position and cause it to tip over onto the person working beneath it.

Contrary to the practice of other mechanics who used the laid-over position, Turner did not chain the cab. Furthermore, he apparently made no attempt to bolt the cab to the frame. It appears that, after removing and overhauling the engine of the loader, Turner was crushed to death beneath the cab while he was preparing to insert the engine back into the loader. No one saw the accident happen.

Turner’s coworkers discovered his body lying between the transmission and the cab. Mechanics observed that the battery disconnect key was in the ignition switch in the “on” position and the batteries were connected. The loader bucket, [271]*271which had earlier been down, was raised because an implement control lever was inadvertently' moved to the “raise” position, activating the hydraulic system. Investigators surmised that the lift arms and bucket moved, causing the cab to fall on Turner. Mechanic Ben Samuel testified that, if Turner had used the 24-degree brace, the brace would have caught the cab and the accident would not have happened.

Curcio, in her capacity as personal representative of Turner’s estate, filed this action asserting claims for negligence, strict liability, and breach of implied warranty. She later voluntarily dismissed the warranty claim and proceeded to trial on the two remaining claims.

Curcio argued Caterpillar was negligent in designing and manufacturing the loader and in failing to warn of foreseeable dangers associated with its use and maintenance. Curcio further contended the loader was unreasonably dangerous because of the absence of an electrical interlock device that allegedly could have prevented the accident.

Caterpillar took the position that Turner disregarded warnings to disconnect the batteries and secure the cab properly. In response to these contentions, Curcio called Warren, who testified the warning on the loader not to “run” the engine was inadequate because it fell short of cautioning service personnel not to “crank” the engine. Warren stated that, to him, “there’s a big difference from a mechanic’s point of view as to whether he’s cranking the engine or running the engine.” Warren also testified that an electrical interlock device would have prevented the accident and that the cost for including such a device would most likely have been minimal.

At the close of Curcio’s case, Caterpillar moved unsuccessfully for a directed verdict arguing: (1) the warnings on the loader were adequate and Turner’s failure to follow those warnings was the proximate cause of his death, and (2) an interlock device was not only unnecessary but ineffective in that it would only disable the ignition switch, which would necessarily have been disconnected once the cab was tilted past 90 degrees. At the close of the testimony, Caterpillar renewed its motion on the same grounds stated in its initial motion, but elaborated on them by further submitting that: (1) the interlock device would not have prevented Turner’s [272]*272death because of evidence that Turner had bypassed the electrical system,2 and (2) the failure to use the term “crank” in the warning was not evidence that the warning was deficient. Again, the trial court denied the motion and submitted the issues of negligence and strict liability to the jury.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Vaughn v. Daniels Co.(West Virginia), Inc.
841 N.E.2d 1133 (Indiana Supreme Court, 2006)
Bray v. Marathon Corp.
588 S.E.2d 93 (Supreme Court of South Carolina, 2003)
Curcio Ex Rel. Estate of Turner v. Caterpillar, Inc.
585 S.E.2d 272 (Supreme Court of South Carolina, 2003)
Bray v. Marathon Corp.
553 S.E.2d 477 (Court of Appeals of South Carolina, 2001)
Curcio v. Caterpillar, Inc.
543 S.E.2d 264 (Court of Appeals of South Carolina, 2001)

Cite This Page — Counsel Stack

Bluebook (online)
543 S.E.2d 264, 344 S.C. 266, Counsel Stack Legal Research, https://law.counselstack.com/opinion/curcio-v-caterpillar-inc-scctapp-2001.