Copperweld Corp. v. United States

682 F. Supp. 552, 12 Ct. Int'l Trade 148, 12 C.I.T. 148, 1988 Ct. Intl. Trade LEXIS 481
CourtUnited States Court of International Trade
DecidedFebruary 24, 1988
DocketCourt 86-03-00338
StatusPublished
Cited by60 cases

This text of 682 F. Supp. 552 (Copperweld Corp. v. United States) is published on Counsel Stack Legal Research, covering United States Court of International Trade primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Copperweld Corp. v. United States, 682 F. Supp. 552, 12 Ct. Int'l Trade 148, 12 C.I.T. 148, 1988 Ct. Intl. Trade LEXIS 481 (cit 1988).

Opinion

MEMORANDUM OPINION

CARMAN, Judge:

Plaintiffs, Copperweld Corp., UNR-Leavitt, Div. UNR, Inc., and Welded Tube Company of America move for judgment on the agency record pursuant to rule 56.1(c)(1) of the Rules of this Court. Plaintiffs challenge the final negative determination by the International Trade Commission (ITC or Commission) in Heavy-Walled Rectangular Welded Carbon Steel Pipes and Tubes from Canada, Inv. No. 731-TA-254 (Final), USITC Pub. No. 1808 (February, 1986) [Rectangular Pipes and Tubes from Canada (Final)]. The ITC determined that the U.S. industry producing this product was not being materially injured or threatened with material injury by reason of the imports of this product from Canada.

*556 Plaintiffs advance several arguments in support of their motion. Plaintiffs contend that the ITC is prohibited from considering the dumping or LTFV margin as a discretionary “other factor” in an injury determination. They urge that some Commissioners decline to examine evidence of price underselling. Plaintiffs also contend that one of the Commissioners applies an erroneous causation analysis. Finally, plaintiffs argue that there is insufficient evidence in the record for the determination that the domestic industry was neither materially injured nor threatened with material injury by reason of the imports from Canada.

For the reasons that follow, the Court finds the determination of the ITC in Rectangular Pipes and Tubes from Canada (Final) is supported by substantial evidence in the record and otherwise in accordance with law. Plaintiffs’ motion for judgment on the agency record is therefore denied.

FACTS

On March 25, 1985, a petition was filed on behalf of the structural tubing subcommittee of the Committee on Pipe and Tube Imports and the individual producer members of that subcommittee including the plaintiffs. The petitioners alleged that imports of heavy-walled rectangular welded carbon steel pipes and tubes from Canada (H-WR) are being or are likely to be sold in the United States at less than fair value (LTFV) and that these imports are materially injuring or threatening material injury to a United States industry.

On April 15, 1985, the International Trade Administration (ITA) initiated a LTFV investigation. Certain Heavy-Walled Rectangular Welded Carbon Steel Pipes and Tubes from Canada; Initiation of Antidumping Duty Investigation, 50 Fed.Reg. 15771 (April 22, 1985). The ITC thereupon issued a preliminary determination that imports of H-WR are materially injuring a U.S. industry. Heavy-Walled Rectangular Welded Carbon Steel Pipes and Tubes from Canada, Inv. No. 731-TA-254 (Preliminary), USITC Pub. No. 1691 (May, 1985) [Rectangular Pipes and Tubes from Canada (Preliminary)].

One of the companies investigated was the defendant-intervenor, Titan Industrial Corp. (Titan). Titan, the largest importer of the subject merchandise, and a U.S. company, accounts for approximately 80% of the imports of the product under investigation. Titan purchases steel coil in Canada, converts the coil into finished H-WR, and sells the H-WR in the United States. Titan does not sell the finished H-WR in Canada.

Notice of the ITA’s preliminary negative determination was published on September 10, 1985. Certain Heavy-Walled Rectangular Welded Carbon Steel Pipes and Tubes from Canada; Preliminary Determination of Sales at Not Less Than Fair Value, 50 Fed Reg. 36910 (Sept. 10, 1985). The ITA determined that a dumping margin of 0.47% for Titan and 0.10% for Acier Royalcor Steel, Inc. (Royalcor) were de minimis.

On November 22, 1985, notice of the ITA’s final affirmative determination was published. See Certain Heavy-Walled Rectangular Welded Carbon Steel Pipes and Tubes from Canada; Final Determination of Sales at Less Than Fair Value, 50 Fed.Reg. 48238 (Nov. 22, 1985). The dumping margin for Titan was found to be 0.65%. 1

Following a hearing before the Commissioners, the ITC voted 5-1 that an industry in the United States is not materially injured or threatened with material injury by reason of the imports of H-WR from Canada.

In the final determination, the views of a plurality of Commissioners, Chairwoman Stem, Vice Chairman Liebler, and Commissioner Brunsdale were published as a single opinion. 2 These Commissioners based *557 their determination primarily on the lack of any causal connection between the imports from Canada and the condition of the domestic industry. Rectangular Pipes and Tubes from Canada (Final), supra, at 3. They determined that there was no material injury by reason of imports and made the following findings:

In determining whether there is material injury to the domestic industry “by reason of” the imports subject to the investigation, the Commission must consider, among other factors, the volume of imports, the effect of the LTFV imports on prices in the United States for the like product, and the impact of such imports on the relevant domestic industry. In this investigation, we find that there is no material injury by reason of the imports. This conclusion rests principally on findings of: no significant increase in import market share in an expanding market; no significant impact on prices; increases in U.S. production, domestic shipments, and capital expenditures; and the extremely low weighted average dumping margin found by the Department of Commerce.

Rectangular Pipes and Tubes from Canada (Final), supra, at 8-9 (footnotes omitted). The concurring views of Commissioners Lodwick and Rohr were also published in a separate opinion. While generally agreeing with the plurality's conclusion that the domestic H-WR industry is not materially injured or threatened with material injury by reason of H-WR imports from Canada, Commissioners Lodwick and Rohr concluded that the U.S. industry is experiencing material injury. They emphasized that the information does not “support the conclusion that Canadian imports are a cause of material injury to the domestic industry.” Id, at 23 (emphasis supplied). 3

BACKGROUND

. In a final antidumping duty investigation, the ITC is directed to ascertain whether:

(A) an industry in the United States—
(i) is materially injured, or
(ii) is threatened with material injury, or
(B) the establishment of an industry in the United States is materially retarded, by reason of imports, or sales (or the likelihood of sales) for importation, of the merchandise with respect to which the administering authority has made an affirmative determination under subsection (a)(1) of this section.

19 U.S.C.A. § 1673b(d) (1980 & Supp.1986). Material injury is “harm which is not inconsequential, immaterial, or unimportant.” 19 U.S.C.A. § 1677(7)(A) (1980).

Free access — add to your briefcase to read the full text and ask questions with AI

Related

JMC Steel Group v. United States
70 F. Supp. 3d 1309 (Court of International Trade, 2015)
LG Electronics, Inc. v. United States International Trade Commission
26 F. Supp. 3d 1338 (Court of International Trade, 2014)
CP Kelco US, Inc. v. United States
24 F. Supp. 3d 1337 (Court of International Trade, 2014)
Gold East Paper (JIANGSU) Co. v. United States
896 F. Supp. 2d 1242 (Court of International Trade, 2012)
Nsk Corp. v. United States
577 F. Supp. 2d 1322 (Court of International Trade, 2008)
Tropicana Products, Inc. v. United States
484 F. Supp. 2d 1330 (Court of International Trade, 2007)
Cleo, Inc. v. United State
30 Ct. Int'l Trade 1380 (Court of International Trade, 2006)
Hynix Semiconductor, Inc. v. United States
431 F. Supp. 2d 1302 (Court of International Trade, 2006)
International Imaging Materials, Inc. v. United States International Trade Commission
30 Ct. Int'l Trade 1181 (Court of International Trade, 2006)
Nitrogen Solutions Fair Trade Committee v. United States
358 F. Supp. 2d 1314 (Court of International Trade, 2005)
Nippon Steel Corp. v. United States
350 F. Supp. 2d 1186 (Court of International Trade, 2004)
Bratsk Aluminum Smelter v. United States
28 Ct. Int'l Trade 955 (Court of International Trade, 2004)
Committee for Fair Coke Trade v. United States
28 Ct. Int'l Trade 1140 (Court of International Trade, 2004)
Nucor Corp. v. United States
318 F. Supp. 2d 1207 (Court of International Trade, 2004)
Altx, Inc. v. United States
26 Ct. Int'l Trade 1425 (Court of International Trade, 2002)
Chefline Corp. v. United States
219 F. Supp. 2d 1303 (Court of International Trade, 2002)
Taiwan Semiconductor Industry Ass'n v. United States
105 F. Supp. 2d 1363 (Court of International Trade, 2000)

Cite This Page — Counsel Stack

Bluebook (online)
682 F. Supp. 552, 12 Ct. Int'l Trade 148, 12 C.I.T. 148, 1988 Ct. Intl. Trade LEXIS 481, Counsel Stack Legal Research, https://law.counselstack.com/opinion/copperweld-corp-v-united-states-cit-1988.