30 CFR · Mineral Resources

§ 75.1101-14 — Installation of dry powder chemical systems.

30 CFR § 75.1101-14

This text of 30 C.F.R. § 75.1101-14 (Installation of dry powder chemical systems.) is published on Counsel Stack Legal Research, covering United States primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
30 C.F.R. § 75.1101-14 (2026).

Text

§ 75.1101-14 Installation of dry powder chemical systems.

(a)Self-contained dry powder chemical systems shall be installed to protect each belt-drive, belt takeup, electrical-controls, gear reducing units and 50 feet of fire-resistant belt or 150 feet of non-fire-resistant belt adjacent to the belt drive.
(b)The fire-control components of each dry powder chemical system shall be a type approved by the Underwriters' Laboratories, Inc., or Factory Mutual Engineering Corp.
(c)The components of each dry powder chemical system shall be located so as to minimize the possibility of damage by roof fall or by the moving belt and its load.

Free access — add to your briefcase to read the full text and ask questions with AI

Nearby Sections

11

Cite This Page — Counsel Stack

Bluebook (online)
30 C.F.R. § 75.1101-14, Counsel Stack Legal Research, https://law.counselstack.com/cfr/30/75/75.1101-14.
View on eCFR ↗