Virginia § 45.2-815 Repairs to circuits and electric equipment

Virginia Statutes

§ 45.2-815 — Repairs to circuits and electric equipment

Virginia § 45.2-815

JurisdictionVirginia

Title 45.2Mines, Minerals, and Energy

Subtitle IICoal Mining

Ch. 8Requirements Applicable to Underground Coal Mines; Electricity, Safety, Etc

Art. 2Electricity

Part BUnderground Coal Mines

This text of Virginia § 45.2-815 (Repairs to circuits and electric equipment) is published on Counsel Stack Legal Research, covering Virginia primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Va. Code Ann. § 45.2-815 (2026).

Text

A.No electrical work shall be performed on any low-voltage, medium-voltage, or high-voltage distribution circuit or equipment except by a certified person or a person who is trained to perform electrical work and to maintain electrical equipment and is working under the direct supervision of a certified person. Every high-voltage circuit shall be grounded before repair work is performed. Disconnecting devices shall be locked out and suitably tagged by the person who performs electrical or mechanical work on such a circuit or piece of equipment connected to such a circuit, except that where locking out is not possible, such devices shall be opened and suitably tagged by such person. Locks and tags shall be removed only by the person who installed them or, if such person is unavailable, by

Free access — add to your briefcase to read the full text and ask questions with AI

A. No electrical work shall be performed on any low-voltage, medium-voltage, or high-voltage distribution circuit or equipment except by a certified person or a person who is trained to perform electrical work and to maintain electrical equipment and is working under the direct supervision of a certified person. Every high-voltage circuit shall be grounded before repair work is performed. Disconnecting devices shall be locked out and suitably tagged by the person who performs electrical or mechanical work on such a circuit or piece of equipment connected to such a circuit, except that where locking out is not possible, such devices shall be opened and suitably tagged by such person. Locks and tags shall be removed only by the person who installed them or, if such person is unavailable, by a certified person authorized by the operator or his agent.

B. A miner may, where necessary, repair energized trolley wires if he wears insulated shoes and lineman's gloves.

C. This section does not prohibit a certified electrical repairman from making checks on or troubleshooting energized circuits or an authorized person from performing repairs or maintenance on equipment once the power is off and the equipment is blocked against motion, except where motion is necessary to make adjustments.

Legislative History

Code 1950, §§ 45-82, 45-82.1; 1954, c. 191; 1966, c. 594, § 45.1-78; 1993, c. 442; 1994, c. 28, § 45.1-161.196; 1996, c. 774; 1999, c. 256; 2021, Sp. Sess. I, c. 387.