§ 5-35.1-19. Construction of glass lenses — Violations — Penalty.
(a) No person shall distribute, sell, or deliver any eyeglasses or sunglasses unless those
eyeglasses or sunglasses are fitted with heat-treated glass lenses, plastic lenses,
lamination lenses, or lenses made impact-resistant by other methods. The provisions
of this subsection do not apply if a physician or optometrist, having found that those
lenses will not fulfill the visual requirements of a particular patient, directs,
in writing, the use of other lenses and gives written notification to the patient.
Before they are mounted in frames, all impact-resistant eyeglasses and su
Free access — add to your briefcase to read the full text and ask questions with AI
§ 5-35.1-19. Construction of glass lenses — Violations — Penalty.
(a) No person shall distribute, sell, or deliver any eyeglasses or sunglasses unless those
eyeglasses or sunglasses are fitted with heat-treated glass lenses, plastic lenses,
lamination lenses, or lenses made impact-resistant by other methods. The provisions
of this subsection do not apply if a physician or optometrist, having found that those
lenses will not fulfill the visual requirements of a particular patient, directs,
in writing, the use of other lenses and gives written notification to the patient.
Before they are mounted in frames, all impact-resistant eyeglasses and sunglass lenses,
except plastic lenses, laminated lenses, and raised-ledge multifocal lenses must withstand
an impact test of a steel ball five-eighths (â…�) of an inch in diameter weighing approximately
fifty-six hundredths of an ounce (0.56 oz.) dropped from a height of fifty inches
(50"). Raised-ledge multifocal lenses are capable of withstanding the impact test
but do not need to be tested beyond initial design testing. To demonstrate that all
plastic lenses and laminated lenses are capable of withstanding the impact test, the
manufacturer of the lenses shall subject to the impact test a statistically significant
sampling of lenses from each production batch, and the tested lenses are representative
of the finished forms as worn by the wearer. Plastic prescription and plastic nonprescription
lenses, tested on the basis of statistical significance, may be tested in uncut finished
or semi-finished form at the point of original manufacture.
(b) Any person convicted of violating the provisions of this section shall be punished
by a fine of not less than five hundred dollars ($500) for each violation.