New Hampshire § 266:49 Visual Requirements

New Hampshire Statutes

§ 266:49 — Visual Requirements

New Hampshire·Title XXI MOTOR VEHICLES·Ch. 266 EQUIPMENT OF VEHICLES·Subdivision Tires

No tire shall be deemed to be in safe driving condition if such tire has:

I.A fabric break, or a cut in excess of one inch in any direction as measured on the outside of the tire and deep enough to reach the body cords, or has been repaired temporarily by the use of blowout patches or boots; or

II.Any bump, bulge or knot related to separation or partial failure of the tire structure; or

III.Any portion of the ply or cord structure exposed; or

IV.A portion of the tread design completely worn, provided such worn portion is of sufficient size to affect the traction and stopping ability of the tire.

Free access — add to your briefcase to read the full text and ask questions with AI

No tire shall be deemed to be in safe driving condition if such tire has:
I. A fabric break, or a cut in excess of one inch in any direction as measured on the outside of the tire and deep enough to reach the body cords, or has been repaired temporarily by the use of blowout patches or boots; or
II. Any bump, bulge or knot related to separation or partial failure of the tire structure; or
III. Any portion of the ply or cord structure exposed; or
IV. A portion of the tread design completely worn, provided such worn portion is of sufficient size to affect the traction and stopping ability of the tire.

New Hampshire § 266:49 (Visual Requirements) — published by Counsel Stack Legal Research, free access to 12M+ legal documents.