Minnesota § 84.821 REQUIREMENTS OF SNOWMOBILE MAKERS

Minnesota Statutes

§ 84.821 — REQUIREMENTS OF SNOWMOBILE MAKERS

Minnesota § 84.821

PartNATURAL RESOURCES

Ch. 84DEPARTMENT OF NATURAL RESOURCES

This text of Minnesota § 84.821 (REQUIREMENTS OF SNOWMOBILE MAKERS) is published on Counsel Stack Legal Research, covering Minnesota primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Minn. Stat. § 84.821 (2026).

Text

Subdivision 1.Identification number.
All snowmobiles made after June 30, 1972, and sold in Minnesota, shall bear the maker's permanent identification number stamped in letters and numbers in the form and at a location prescribed by rule of the commissioner.

Subd. 2.Area for registration number.
All snowmobiles made after June 30, 1972, and sold in Minnesota, shall be designed and made to provide an area on which to affix the registration decal. A clear area must be provided on each side of the cowling with a minimum size of 3-1/2 square inches and at least 12 inches from the ground when the machine is resting on a hard surface.

Free access — add to your briefcase to read the full text and ask questions with AI

Subdivision 1.Identification number.
All snowmobiles made after June 30, 1972, and sold in Minnesota, shall bear the maker's permanent identification number stamped in letters and numbers in the form and at a location prescribed by rule of the commissioner.

Subd. 2.Area for registration number.
All snowmobiles made after June 30, 1972, and sold in Minnesota, shall be designed and made to provide an area on which to affix the registration decal. A clear area must be provided on each side of the cowling with a minimum size of 3-1/2 square inches and at least 12 inches from the ground when the machine is resting on a hard surface.