Subdivision 1.Scope.
For purposes of sections326B.31to326B.399, the terms defined in this section have the meanings given them.
Subd. 2.Class A electrical contractor.
"Class A electrical contractor" means a licensed contractor whose responsible licensed individual is a licensed Class A master electrician.
Subd. 3.
MS 2007 Supp [Renumbered subd 10]
Subd. 4.
MS 2007 Supp [Renumbered subd 24]
Subd. 5.
MS 2007 Supp [Renumbered subd 28]
Subd. 6.
MS 2007 Supp [Renumbered subd 30]
Subd. 7.Class A installer.
"Class A installer" means an individual who has the necessary qualifications, training, experience, and technical knowledge to properly lay out and install electrical wiring, apparatus, and equipment for major electrical home appliances and such other electrical equipment as is determined by the commissioner pursuant to section326B.33, subdivision 3, on the load side of the main service on farmsteads or in any town or municipality with less than 1,500 inhabitants, which is not contiguous to a city of the first class and does not contain an established business of a master electrician, and who is licensed as a Class A installer by the commissioner.
Subd. 8.Class A journeyworker electrician.
"Class A journeyworker electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to perform and supervise any electrical work except for planning or laying out of electrical work, and who is licensed as a Class A journeyworker electrician by the commissioner.
Subd. 9.Class A master electrician.
"Class A master electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to perform and supervise any electrical work, and who is licensed as a Class A master electrician by the commissioner.
Subd. 10.Class B electrical contractor.
"Class B electrical contractor" means a licensed contractor whose responsible licensed individual is a licensed Class B master electrician.
Subd. 11.Class B installer.
"Class B installer" means an individual who has the necessary qualifications, training, experience, and technical knowledge to properly lay out and install electrical wiring, apparatus, and equipment on center pivot irrigation booms on the load side of the main service on farmsteads, and install other electrical equipment determined by the commissioner, and who is licensed as a Class B installer by the commissioner.
Subd. 12.Class B journeyworker electrician.
"Class B journeyworker electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to install, alter, repair, and supervise the installing, altering, or repairing of electrical wiring, apparatus, and equipment for single phase systems of not more than 200 ampere capacity for light, heat, power, and other purposes on any farm or in any single family dwelling located in any town or municipality which has a population of less than 2,500 inhabitants, and who is licensed as a Class B journeyworker electrician by the commissioner.
Subd. 13.Class B master electrician.
"Class B master electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to perform and supervise any electrical work for single phase systems of not over 200 ampere capacity for light, heat, power, and other purposes on any farm or in any single family dwelling located in any town or municipality which has a population of less than 2,500 inhabitants, and who is licensed as a Class B master electrician by the commissioner.
Subd. 14.Contractor.
"Contractor" means a person who performs or offers to perform any electrical work, with or without compensation, who is licensed as a contractor by the commissioner. A contractor's license does not of itself qualify its holder to perform or supervise the electrical work authorized by holding any class of electrician's or other personal license. Contractor includes electrical contractors, satellite system contractors, and technology system contractors.
Subd. 15.Demarcation.
"Demarcation" means listed equipment as identified in Minnesota Rules, part3801.3619, such as a transformer, uninterruptible power supply (UPS), battery, control panel, or other device that isolates technology circuits or systems from nontechnology circuits or systems, including plug or cord and plug connection.
Subd. 16.Direct supervision.
"Direct supervision" means:
(1) an unlicensed individual is being supervised by an individual licensed to perform the electrical work being supervised;
(2) during the entire working day of the unlicensed individual, the licensed individual is physically present at the location where the unlicensed individual is performing electrical work and immediately available to the unlicensed individual;
(3) the licensed individual is physically present and immediately available to the unlicensed individual at all times for assistance and direction;
(4) electronic supervision does not meet the requirement of physically present and immediately available;
(5) the licensed individual shall review the electrical work performed by the unlicensed individual before the electrical work is operated; and
(6) the licensed individual is able to and does determine that all electrical work performed by the unlicensed individual is performed in compliance with section326B.35.
The licensed individual is responsible for the compliance with section326B.35of all electrical work performed by the unlicensed individual.
Subd. 17.Electrical work.
"Electrical work" means the installing, altering, repairing, planning, or laying out of electrical wiring, apparatus, or equipment for electrical light, heat, power, technology circuits or systems, or other purposes. The installing, altering, repairing, planning, or laying out of electrical wiring, apparatus, or equipment for electrical light, heat, power, technology circuits or systems, or other purposes includes, but is not limited to, the performance of any work regulated by the standards referred to in section326B.35.
Subd. 18.
[Repealed,2013 c 85 art 2 s 44]
Subd. 19.
[Repealed,2013 c 85 art 2 s 44]
Subd. 20.Lineman.
"Lineman" means an individual having the necessary qualifications, training, experience, and technical knowledge to construct and maintain transmission and distribution systems that are or will be owned or leased by an electrical utility, and who is licensed as a lineman by the commissioner.
Subd. 21.Maintenance electrician.
"Maintenance electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to properly maintain and repair electrical wiring, apparatus, and equipment, who is licensed as a maintenance electrician by the commissioner or who is exempt from licensing by sections326B.32to326B.399.
Subd. 22.
[Repealed,2013 c 85 art 2 s 44]
Subd. 23.Owner.
An "owner" is an individual who physically performs electrical work on premises the individual owns and actually occupies as a residence or owns and will occupy as a residence upon completion of its construction.
Subd. 24.Personal license.
"Personal license" means any license issued by the commissioner under section326B.33or the rules adopted under section326B.33, except a contractor's license.
Subd. 25.Power limited technician.
"Power limited technician" means an individual having the necessary qualifications, training, experience, and technical knowledge to install, alter, repair, plan, lay out, and supervise the installing, altering, and repairing of electrical wiring, apparatus, and equipment for technology circuits or systems, and who is licensed as a power limited technician by the commissioner.
Subd. 26.Process control circuits or systems.
"Process control circuits or systems" are circuits or systems, regardless of electrical classification, that are integrated with a manufacturing, mining, energy, finishing, conveyance of equipment or product, material handling or packaging process that makes or assembles, or similar process. Process control systems does not include premises network and communication systems whose purpose or function is not dedicated to process control circuits or systems.
Subd. 26a.Request for inspection.
"Request for inspection" means the application for and issuance of a permit for an electrical installation that is required to be inspected under section326B.36.
Subd. 27.Residential dwelling.
A "residential dwelling" is a single dwelling unit that is contained in a one-family, two-family, or multifamily dwelling as defined in the National Electrical Code pursuant to section326B.35. A residential dwelling includes a garage and accessory building that can only be used by the residents of the single dwelling unit.
Subd. 28.Responsible licensed individual.
A contractor's "responsible licensed individual" means the licensed Class A master electrician, Class B master electrician, master elevator constructor, or power limited technician designated in writing by the contractor in the contractor's license application, or in another manner acceptable to the commissioner, as the individual responsible for the contractor's compliance with sections326B.31to326B.399, all rules adopted under these sections, and all orders issued under section326B.082. The terms "licensed responsible individual" and "licensed responsible master electrician or power limited technician" are synonymous.
Subd. 29.Technology circuits or systems.
"Technology circuits or systems" means class 2, class 3, or class 4 circuits or systems for, but not limited to, remote control, signaling, control, alarm, and audio signal, including associated components as covered by the National Electrical Code, and which are isolated from circuits or systems other than class 2, class 3, or class 4 by a demarcation and are not process control circuits or systems; antenna and communication circuits or systems as covered by the National Electrical Code; and circuitry and equipment for low-voltage lighting, limited to a class 2 or class 3 power supply covered by the Low-Voltage Lighting article in the National Electrical Code. The planning, laying out, installing, altering, and repairing of technology circuits or systems must be performed in accordance with the applicable requirements of the National Electrical Code pursuant to section326B.35.
Subd. 30.Technology system contractor.
"Technology system contractor" means a licensed contractor whose responsible licensed individual is a licensed power limited technician or licensed master electrician.
Subd. 31.Satellite broadcast communication system.
"Satellite broadcast communication system" means antenna and receiving equipment for a residential dwelling to receive and transmit communication signals from satellite sources as covered by the National Electrical Code. Satellite broadcast communication system is a subset of technology circuits and systems.
Subd. 32.Satellite system installer.
"Satellite system installer" means an individual having the necessary training, knowledge, and experience to plan, lay out, supervise, and install, maintain, and repair wiring, apparatus, and equipment for satellite broadcast communication systems.
Subd. 33.Satellite system contractor.
"Satellite system contractor" means a licensed contractor whose responsible licensed individual is a licensed satellite system installer.