Idaho § 39-8615 INSPECTIONS AND TESTS

Idaho Statutes

§ 39-8615 — INSPECTIONS AND TESTS

Idaho § 39-8615

Title 39HEALTH AND SAFETY

Ch. 86IDAHO ELEVATOR SAFETY CODE ACT

This text of Idaho § 39-8615 (INSPECTIONS AND TESTS) is published on Counsel Stack Legal Research, covering Idaho primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Idaho Code § 39-8615 (2026).

Text

Conveyances shall have an inspection performed in accordance with ANSI/ASME standards set forth in section 39-8614, Idaho Code. The following types of inspections are required:

(1)Acceptance. The initial inspection and tests of new or altered equipment by a QEI to check for compliance with the applicable code requirements.

(2)Periodic. Periodic inspection and tests plus additional detailed examination and operation of equipment at specified intervals performed by a QEI to check for compliance with the applicable code requirements. Periodic inspections are required at least every five (5) years.

(3)Routine. Annual examinations performed in compliance with applicable codes to verify compliance with requirements.

Free access — add to your briefcase to read the full text and ask questions with AI

Conveyances shall have an inspection performed in accordance with ANSI/ASME standards set forth in section 39-8614, Idaho Code. The following types of inspections are required:
(1) Acceptance. The initial inspection and tests of new or altered equipment by a QEI to check for compliance with the applicable code requirements.
(2) Periodic. Periodic inspection and tests plus additional detailed examination and operation of equipment at specified intervals performed by a QEI to check for compliance with the applicable code requirements. Periodic inspections are required at least every five (5) years.
(3) Routine. Annual examinations performed in compliance with applicable codes to verify compliance with requirements.