William Lorance v. Marion Power Shovel Company, Inc., a Corporation, Marion Power Shovel Company, Inc., a Corporation, Third-Party v. American Smelting and Refining Co., a Corporation, Third-Party

520 F.2d 737, 1975 U.S. App. LEXIS 13763
CourtCourt of Appeals for the Third Circuit
DecidedJuly 10, 1975
Docket74-1824
StatusPublished

This text of 520 F.2d 737 (William Lorance v. Marion Power Shovel Company, Inc., a Corporation, Marion Power Shovel Company, Inc., a Corporation, Third-Party v. American Smelting and Refining Co., a Corporation, Third-Party) is published on Counsel Stack Legal Research, covering Court of Appeals for the Third Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
William Lorance v. Marion Power Shovel Company, Inc., a Corporation, Marion Power Shovel Company, Inc., a Corporation, Third-Party v. American Smelting and Refining Co., a Corporation, Third-Party, 520 F.2d 737, 1975 U.S. App. LEXIS 13763 (3d Cir. 1975).

Opinion

520 F.2d 737

William LORANCE, Plaintiff,
v.
MARION POWER SHOVEL COMPANY, INC., a corporation, Defendant.
MARION POWER SHOVEL COMPANY, INC., a corporation,
Third-Party Plaintiff-Appellant,
v.
AMERICAN SMELTING AND REFINING CO., a corporation,
Third-Party Defendant-Appellee.

No. 74-1824.

United States Court of Appeals,
Seventh Circuit.

Argued April 14, 1975.
Decided July 10, 1975.

Frank Glazer, Harvey A. Cohan, Chicago, Ill., for Marion Power Shovel co.

Tom L. Yates, Chicago, Ill., for American Smelting and Refining.

Before CASTLE, Senior Circuit Judge, and STEVENS and SPRECHER, Circuit Judges.

CASTLE, Senior Circuit Judge.

Plaintiff William Lorance was injured while working on the repair of a Model 5760 strip-mining shovel. Lorance filed a complaint in the district court below seeking $300,000 in damages, and alleging that his injury was caused by the negligence of the defendant, Marion Power Shovel Company, Inc. Jurisdiction was based on diversity of citizenship. In turn, Marion Power filed a third-party complaint against American Smelting and Refining Company, plaintiff's employer.1 The complaint stated that in the event Marion Power was found liable to the plaintiff, its negligence was passive only, and that therefore it was entitled to be indemnified by American Smelting, who was alleged to be actively negligent in causing the plaintiff's injury.

The case was tried before a jury, with the issue of damages reserved. At the close of all the evidence, the trial court denied Marion Power's claim for indemnity by directing a verdict on the third-party complaint against Marion Power and in favor of American Smelting. The jury then found Marion Power liable to plaintiff Lorance. Marion Power appeals only from the entry of the directed verdict against it on its third-party complaint seeking indemnity. We affirm.

I.

In diversity cases we are governed by state law, and this court also applies the state standard in determining the propriety of directed verdicts. Illinois State Trust Co. v. Terminal Railroad Association of St. Louis, 440 F.2d 497, 500 (7th Cir.), cert. denied 404 U.S. 855, 92 S.Ct. 100, 30 L.Ed.2d 96 (1971). Under the Illinois standard set forth in Pedrick v. Peoria & E.R.R., 37 Ill.2d 494, 510, 229 N.E.2d 504, 513-514 (1967), the district court's directed verdict can be upheld only if "all the evidence, when viewed in its aspect most favorable to . . . (Marion Power), so overwhelmingly favors (American Smelting) that no contrary verdict based on that evidence could ever stand." We first set out the evidence in accordance with that standard.

The Model 5760 strip-mining shovel is a mammoth machine designed and manufactured by Marion Power Shovel Company for the purpose of unearthing deposits of coal by removing the covering layers of soil. The total weight of the shovel is approximately six million pounds, and its bucket can remove seventy cubic yards of earth in one gulp. The entire machine is mobile and moves along the surface on caterpillar tracks. The upper portion of the machine, to which the bucket is attached by a dipper stick, rests on a series of rails and rollers which permit the bucket and upper structure of the shovel to swing in a 360o circle. This upper section weighs 3,600,000 pounds. Wear and tear occurs because of the pivoting of the upper structure, and therefore, it is necessary approximately every eight years to replace the rails and rollers. This replacement is known as a complete rail and roller change-out. The 5760 shovel located at the Mecco Mine of the Midland Coal Company, a division of American Smelting and Refining Company, needed such repairs.

Because no employee of American Smelting at the Mecco Mine had experience in a complete rail and roller change-out, Marion Power was contacted for assistance. Gerald Updyke, a service representative from Marion Power, visited the Mine in May, 1972 in order to determine the extent and nature of the repairs to be done. Two methods of accomplishing the change-out were discussed by Updyke with Dale Teeters, mine superintendent. The first method involved lifting the upper structure of the machine off the lower rails and rollers. The front of the upper structure would be supported by the bucket and dipper stick, and the rear by steel columns, the columns also necessary for safety. The second method suggested by Updyke did not require separating the upper structure of the shovel from the lower frame. This method involved removing the rails and rollers one at a time by swinging the upper structure. During Updyke's visit to the Mine, no decision was made as to the method to employ.

The actual change-out operation began on July 8. The personnel selected to work on the change-out were all employees of the Mine and were under the supervision of Robert Hartstirn, master mechanic for American Smelting at the Mecco Mine. Since Updyke was unavailable, Dick Roberts was sent in his place by Marion Power as an expert to supervise the rail and roller change-out. Apparently the necessary materials to support the upper frame had not been procured and were not at the Mine. In light of this fact, Roberts directed that the second method discussed by Updyke, which did not require separation of the frames, be employed.

On July 9, problems were encountered in attempting to replace the rails and rollers by swinging the machine. After discussing alternative procedures with American Smelting supervisors, Roberts selected another method to accomplish the change-out. This method involved raising the front end of the upper structure by placing the bucket on the ground directly in front of the machine and applying downward force through the dipper stick and onto the bucket. When this method was employed to lift the upper structure, no other materials to support the upper structure were utilized.

While the upper structure was being raised in this manner, Hartstirn and plaintiff Lorance attempted to put in place a new roller. Hartstirn, without direction from Roberts, told Lorance to grab a pry bar and pry up the roller. As Lorance was doing this, the upper portion of the structure slipped down, shooting the pry bar outward and injuring Lorance. Prior to this occurrence, the upper structure had slipped down at least twice.

Throughout the course of repairs, Roberts was present at the shovel. He gave orders to various employees of American Smelting, and gave general instructions to Hartstirn, although the specifics of executing those instructions were often filled in by Hartstirn independently. The evidence also shows that mine superintendent Teeters had the authority to stop the repair job, and that American Smelting did not conduct any safety meetings for its employees with respect to the change-out procedure.

II.

As set forth in Carver v.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

People of State of Illinois v. Maryland Casualty Co.
132 F.2d 850 (Seventh Circuit, 1942)
St. Joseph Hospital v. Corbetta Construction Co.
316 N.E.2d 51 (Appellate Court of Illinois, 1974)
Carver v. Grossman
305 N.E.2d 161 (Illinois Supreme Court, 1973)
Lindner v. Kelso Burnett Electric Co.
273 N.E.2d 196 (Appellate Court of Illinois, 1971)
Warzynski v. Village of Dolton
317 N.E.2d 694 (Appellate Court of Illinois, 1974)
Moody v. Chicago Transit Authority
307 N.E.2d 789 (Appellate Court of Illinois, 1974)
O'LEARY v. Siegel
256 N.E.2d 127 (Appellate Court of Illinois, 1970)
Pedrick v. Peoria & Eastern Railroad
229 N.E.2d 504 (Illinois Supreme Court, 1967)
Sack v. Arcole Midwest Corp.
179 N.E.2d 441 (Appellate Court of Illinois, 1961)
Harris v. Algonquin Ready Mix, Inc.
322 N.E.2d 58 (Illinois Supreme Court, 1974)
Lorance v. Marion Power Shovel Co.
520 F.2d 737 (Seventh Circuit, 1975)
Gibson v. Missouri Pacific Railroad
404 U.S. 855 (Supreme Court, 1971)

Cite This Page — Counsel Stack

Bluebook (online)
520 F.2d 737, 1975 U.S. App. LEXIS 13763, Counsel Stack Legal Research, https://law.counselstack.com/opinion/william-lorance-v-marion-power-shovel-company-inc-a-corporation-marion-ca3-1975.