Walters v. Inexco Oil Co.

511 F. Supp. 21, 1979 U.S. Dist. LEXIS 12763
CourtDistrict Court, S.D. Mississippi
DecidedApril 26, 1979
DocketCiv. A. H77-0021(N), H77-0022(N)
StatusPublished
Cited by8 cases

This text of 511 F. Supp. 21 (Walters v. Inexco Oil Co.) is published on Counsel Stack Legal Research, covering District Court, S.D. Mississippi primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Walters v. Inexco Oil Co., 511 F. Supp. 21, 1979 U.S. Dist. LEXIS 12763 (S.D. Miss. 1979).

Opinion

*23 MEMORANDUM OPINION

WALTER L. NIXON, Jr., District Judge.

These consolidated diversity actions were filed by the plaintiffs, Nevel A. Walters and his wife, Mrs. Delphia Walters, both resident citizens of the State of Mississippi, against Inexco Oil Company, a foreign corporation, to recover damages for personal injuries sustained by Mr. Walters as a result of an explosion which occurred in the course of his employment with Loffland Brothers Company while drilling an oil well for Inexco Oil Company. The Complaint of Mrs. Delphia Walters seeks to recover for loss of consortium caused by the personal injuries suffered by her husband as a result of the explosion. The plaintiffs charge that Inexco is liable to them because of its negligence in failing to furnish Walters a safe place to work and in failing to properly install, test and inspect the “kill” line, a safety device which is attached to the well to control well explosions caused by subterranean pressure. Inexco has filed a general denial of the allegations of the Complaint and has filed a Third Party Complaint against Loffland Brothers Company alleging that under the Master Rotary Drilling Contract executed by Inexco and Loffland, Loffland has agreed to be responsible for all liability incurred in the course of the drilling operation, and to stand between Inexco and any loss and that any negligent actions complained of were those of Loffland Brothers.

The case was tried before the Court without a jury, and based upon all the evidence of record, the pretrial order, pleadings and proposed findings of fact and conclusions of law and memoranda of authority submitted by the parties, this Court makes the following findings of fact and reaches the following conclusions of law.

Findings of Fact

At the outset the Court notes that this trial revolved around the business relationships and terminology which are indigenous to the oil production industry, and an explanation and description will be helpful. The person or business that actually drills the oil well is called the contractor, and his responsibility, subject to the terms of the contract he enters into and government regulations, as will be revealed below, is to drill the well to the depth specified in the contract and hopefully at that point to bring the well into a producing status. The person or organization who owns or has control of the mineral rights sought to be exploited by the well is called the operator, and again subject to the contract terms and government regulations, the operator has certain obligations to fulfill in drilling the well, most notably insofar as this case is concerned, the duty to require that safety precautions be taken on the job site. In this case the operator was the defendant Inexco Oil Company, and Inexco had signed a contract with Loffland, the contractor, under which Loffland would drill the well in question for Inexco.

The crew which actually handles the drilling rig, in this case all Loffland employees, is made up of six men. The man in charge is called the tool pusher, and on the day of the accident the regular tool pusher, named Riley Dials, was not present at the job site and a substitute tool pusher, Bobby J. Fielder, was in charge. The man immediately subordinate to the tool pusher is called the driller, who on this job was Clyde Den-son. He was in immediate control of the four roughnecks or manual laborers on the drilling operation. In addition to the plaintiff Walters, the other roughnecks were Joe Roberts, Thomas J. Smith, and a man who was identified only as Frenchie.

On February 26,1971, Walters was working as a roughneck for Loffland Brothers on a drilling rig owned by Loffland and engaged in drilling a well on an Inexco lease at Masonite Well No. 2 in the Prairie Branch Field in Clarke County, Mississippi. It was raining on the day in question and Walters was putting on his rain slicker in the early morning when he saw a man whom the crew had come to identify as a representative of Inexco (referred to by the witness as “the Inexco man”) talking to Bobby Fielder, the tool pusher on that day.

*24 Walters was close enough to the Inexco man and Fielder to hear the Inexco man tell Fielder to have the crew hook up the kill line, which, as will be discussed in detail below, is a safety device designed to aid in controlling the danger of explosion caused by subterranean pressure exerted by oil and gas seeking escape to the surface. After the Inexco man told Fielder to have the kill line connected, the driller, Clyde Denson, came to Walters and Thomas J. Smith and told them to attach the kill line.

When the drilling of an oil well is started after the rig is set up, one of the first steps is to drill a hole and insert a large pipe called the surface casing to protect the sides of the hole from caving in, to prevent fresh water and sand seepage, allow the operator to build up mud weight, and to allow drilling to the desired depth. The size of the surface casing, and the depth to which it will extend are controlled by the agreement between the contractor and the operator, which is embodied in the “Bid Sheet and Drilling Order.” In this well a surface casing of 10% inches diameter was called for, to extend to a depth of approximately 3500 feet. After the surface casing has been installed, concrete is pumped under pressure into the surface casing and is under such pressure that it then comes back up on the outside of the surface casing, between the large pipe and the ground, until the concrete reaches the surface. The concrete is then allowed to set or harden for a period of time determined by the operator in order that the surface casing might be secured in the hole to allow further drilling to proceed. The well head is welded to the top of the surface casing, and safety devices called blow-out preventers are attached to the top of the well head. Since more than one of these can be used, it is common to refer to the blow-out preventer “stack.” This well had two blow-out preventers, a high and a low blow-out preventer, with the former located approximately 40" above the ground. Of course all the well head/blowout preventer stack are below the drilling platform floor, which is located several feet above the blow-out preventers. Between the two blow-out preventers there is a valve to which the “kill line” is to be attached. Through the kill line, when attached to the blow-out preventer assembly, can be pumped drilling fluid, commonly mud, from there down into the hole to subdue well pressure caused by oil and gas. The connection to which the kill line is attached is the stand pipe.

Pursuant to Denson’s instructions, Smith and Walters went under the rig floor to connect the kill line, and according to Smith, Walters was fitting a Stilson wrench to the valve when the valve blew out of the stand pipe, the force of the explosion hurling the plaintiff out from under the rig substructure and into the drilling line spool. The drilling mud which spewed out as a result of the explosion almost drowned the plaintiff, and he was severely and permanently injured. Walters did nothing to precipitate this explosion in any manner. As quickly as possible, the plaintiff was placed in the back seat of a car and Fielder and Smith drove him 20 miles to the Jones County Community Hospital for emergency treatment.

There was a factual dispute at the trial over whether a representative from Inexco had been to the well site on the day of the accident and talked to the tool pusher.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Bolivar v. R & H Oil and Gas Co., Inc.
789 F. Supp. 1374 (S.D. Mississippi, 1991)
Walters v. Inexco Oil Company
725 F.2d 1014 (Fifth Circuit, 1984)
Walters v. Inexco Oil Co.
725 F.2d 1014 (Fifth Circuit, 1984)
Walters v. Inexco Oil Co.
440 So. 2d 268 (Mississippi Supreme Court, 1983)
Woods v. Nichols
416 So. 2d 659 (Mississippi Supreme Court, 1982)
Hoskie v. United States
666 F.2d 1353 (Tenth Circuit, 1981)

Cite This Page — Counsel Stack

Bluebook (online)
511 F. Supp. 21, 1979 U.S. Dist. LEXIS 12763, Counsel Stack Legal Research, https://law.counselstack.com/opinion/walters-v-inexco-oil-co-mssd-1979.