United States Gypsum Company v. Ameriform LLC

CourtDistrict Court, N.D. Illinois
DecidedApril 19, 2022
Docket1:19-cv-00596
StatusUnknown

This text of United States Gypsum Company v. Ameriform LLC (United States Gypsum Company v. Ameriform LLC) is published on Counsel Stack Legal Research, covering District Court, N.D. Illinois primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
United States Gypsum Company v. Ameriform LLC, (N.D. Ill. 2022).

Opinion

IN THE UNITED STATES DISTRICT COURT FOR THE NORTHERN DISTRICT OF ILLINOIS EASTERN DIVISION

UNITED STATES GYPSUM ) COMPANY ) ) Plaintiff, ) No. 1:19-cv-596 ) v. ) ) District Judge Steven C. Seeger ECTEK INTERNATIONAL, INC., ) ) Magistrate Judge Jeffrey I. Cummings Defendant. ) )

MEMORANDUM OPINION AND ORDER Before the Court is the motion by plaintiff, United States Gypsum Company (“USG”), to compel amended responses to various discovery requests. (Dckt. #143). Defendant, Ectek International, Inc., filed a response on March 9, 2022 (Dckt. #150). On April 18, 2022, USG filed a second motion to compel seeking documents that Ectek had allegedly agreed to produce, but had not yet turned over. (Dckt. #155). For the reasons set forth below, USG’s motions to compel discovery are granted in part and denied in part. I. BACKGROUND

USG is a Chicago-based corporation that develops and sells structural subfloor panels (“panels”), which are used in the construction of commercial and residential buildings throughout the United States. The USG product relevant to this action is a 3/4-inch, concrete panel, which was designed to “create 1-, 2-, and 3-hour fire-rated floor-ceiling assemblies.” (Dckt. #132 at 3). Importantly, USG’s panel is classified as “non-combustible” by ASTM International, a private international standards organization that promulgates safety standards for a variety of consumer products. For a building material to be considered non-combustible under this standard, it must withstand “the ASTM E136,” a thirty-minute test. The International Building Code (“IBC”) has also adopted the ASTM E136 as its recommended standard for non- combustibility. (Dckt. #132 at 6). Ectek, a Canadian corporation, is also in the business of manufacturing and selling structural panels, including the “Armoroc Structural Cement Panel.” Armoroc is a cement-

bonded particle board that competes directly with USG’s panel in the United States. Ectek has sold Armoroc to Ameriform, a Massachusetts-based LLC, which has then resold Armoroc to customers in the United States. USG alleges that, when selling Armoroc to American customers, Ectek has misrepresented the product in a variety of ways, most egregiously by advertising it as a “non- combustible” building material despite the fact that Armoroc has not passed the thirty-minute ASTM E136. Ectek responds that “there is no universally accepted, applicable definition of ‘non-combustible’ for structural cement panels.” (Dckt. #24 at 3). Instead, Ectek argues that what qualifies as a non-combustible material varies by jurisdiction. Ectek further asserts that at

least one jurisdiction has classified materials as non-combustible if they pass a “modified ASTM E136,” meaning they are able to withstand test conditions for ten, rather than thirty, minutes. (Dckt. #24 at 4). USG appears to concede that jurisdictions can, theoretically, adopt any combustibility standard they want. However, it argues that this jurisdictional freedom means little when the IBC has been adopted in all fifty states and requires an unmodified ASTM E136. (Dckt. #143 at 12). USG filed suit against both Ectek and Ameriform on January 29, 2019, seeking compensatory and punitive damages. In October 2020, USG and Ameriform entered into a settlement agreement whereby USG’s claims against Ameriform were dismissed with prejudice. (Dckt. #114). USG then filed a Second Amended Complaint on August 20, 2021, dropping all claims related to Ameriform’s conduct and seeking only prospective injunctive relief against Ectek. (Dckt. #132). USG’s remaining claims against Ectek allege false advertising and unfair competition in violation of Section 43(a) of the Lanham Act, 15 U.S.C. §1125(a), the Illinois Consumer Fraud and Deceptive Business Practices Act, 815 ILCS 505/2, and the Illinois

Uniform Deceptive Trade Practices Act, 815 ILCS 510/2; as well as unfair competition under Illinois common law.1 (Dckt. #132 at 1-2). Essentially, USG claims that (1) Ectek’s representations to consumers that Armoroc is non-combustible are untrue; (2) Ectek continues to make these misrepresentations; and (3) these misrepresentations have led consumers to purchase Armoroc, thus damaging USG. (Id. at 6). Ectek filed a counterclaim against USG on May 6, 2019, accusing USG of false advertising and unfair competition under various federal and state laws. Ectek alleges that USG “engaged in a systematic effort to mislead and confuse consumers . . . by repeatedly spreading false claims that [USG’s] [panel] product was the only ‘Non-Combustible’ product available on

the market, that the ASTM E136 test is a universally mandated test for combustibility for [panel] and [cement-bonded particle board] products, and that Armoroc could never be used in construction requiring non-combustible materials.” (Dckt. #24 at 5, 8). Ectek specifically cites two of USG’s promotional materials as promulgating these claims: a 2012 white paper and a 2016 white paper.2 Ectek alleges that USG’s statements “impacted Ectek’s sales of Armoroc and

1 USG’s additional allegation – arguing that Ectek committed copyright infringement in 2017 by creating a “submittal sheet” substantially similar to a 2016 USG submittal sheet – is largely unrelated to the present motion to compel discovery.

2 USG’s 2012 white paper claimed that cement-bonded particle boards do not meet the standard for non- combustibility, generally; a panel can only be considered combustible if it can pass an unmodified ASTM E136 test; and Armoroc is combustible. The 2016 white paper contained the same claims and included a the purchasing decisions of Ectek’s customers and potential customers.” (Dckt. #24 at 8). Ectek seeks compensatory, punitive, and injunctive relief. Discovery in this matter is ongoing. USG served supplemental interrogatories and requests for production on June 20, 2019, to which Ectek responded on August 17, 2020. (Dckt. #143-1). Ectek served amended responses on January 26, 2022. (Dckt. #143-5). The parties are

“still negotiating over the appropriate time-scope for ESI searches.” (Dckt. #143 at 3). On February 28, 2022, the District Court granted one final extension of discovery and ordered fact discovery closed on April 30, 2022, and expert discovery closed on August 25, 2022. (Dckt. #147). II. LEGAL STANDARD

A party may file a motion to compel under Federal Rule of Civil Procedure 37 whenever another party fails to respond to a discovery request or when its response is insufficient. Fed.R.Civ.P. 37(a). Courts have broad discretion in resolving such disputes and do so by adopting a liberal interpretation of the discovery rules. Chicago Reg. Council of Carpenters Pension Fund v. Celtic Floor Covering, Inc., 316 F.Supp.3d 1044, 1046 (N.D.Ill. 2018). Rule 26 provides that the “[p]arties may obtain discovery regarding any nonprivileged matter that is relevant to any party’s claim or defense.” Fed.R.Civ.P. 26(b)(1); see Motorola Sols., Inc. v. Hytera Commc’ns Corp., 365 F.Supp.3d 916, 924 (N.D.Ill. 2019) (“Relevance focuses on the claims and defenses in the case, not its general subject matter.”). Discoverable information is not limited to evidence admissible at trial. Fed.R.Civ.P. 26(b)(1).

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Kolender v. Lawson
461 U.S. 352 (Supreme Court, 1983)
Hot Wax, Inc. v. Turtle Wax, Inc.
191 F.3d 813 (Seventh Circuit, 1999)
Daniel Engel v. Robert Buchan
710 F.3d 698 (Seventh Circuit, 2013)
Lens Crafters, Inc. v. Vision World, Inc.
943 F. Supp. 1481 (D. Minnesota, 1996)
Lexmark Int'l, Inc. v. Static Control Components, Inc.
134 S. Ct. 1377 (Supreme Court, 2014)
Patrick Camasta v. Jos. A. Bank Clothiers, Inc.
761 F.3d 732 (Seventh Circuit, 2014)
Motorola Solutions, Inc. v. Hytera Commc'ns Corp.
365 F. Supp. 3d 916 (E.D. Illinois, 2019)
Nexxus Products Co. v. CVS New York, Inc.
188 F.R.D. 11 (D. Massachusetts, 1999)
Sylgab Steel & Wire Corp. v. Imoco-Gateway Corp.
62 F.R.D. 454 (N.D. Illinois, 1974)
Lewis v. Tully
99 F.R.D. 632 (N.D. Illinois, 1983)
Schaap v. Executive Industries, Inc.
130 F.R.D. 384 (N.D. Illinois, 1990)

Cite This Page — Counsel Stack

Bluebook (online)
United States Gypsum Company v. Ameriform LLC, Counsel Stack Legal Research, https://law.counselstack.com/opinion/united-states-gypsum-company-v-ameriform-llc-ilnd-2022.