Transcom, Inc., and L & S Bearing Company v. United States, and the Timken Company

294 F.3d 1371, 24 I.T.R.D. (BNA) 1225, 2002 U.S. App. LEXIS 12723, 2002 WL 1378723
CourtCourt of Appeals for the Federal Circuit
DecidedJune 27, 2002
Docket01-1138
StatusPublished
Cited by41 cases

This text of 294 F.3d 1371 (Transcom, Inc., and L & S Bearing Company v. United States, and the Timken Company) is published on Counsel Stack Legal Research, covering Court of Appeals for the Federal Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Transcom, Inc., and L & S Bearing Company v. United States, and the Timken Company, 294 F.3d 1371, 24 I.T.R.D. (BNA) 1225, 2002 U.S. App. LEXIS 12723, 2002 WL 1378723 (Fed. Cir. 2002).

Opinion

BRYSON, Circuit Judge.

In a review of an antidumping order, the Commerce Department determined that two Hong Kong resellers of tapered roller bearings from the People’s Republic of China (“PRC” or “China”) were subject to a dumping margin calculated using the “best information available” (“BIA”). Transeom, Inc., which purchased tapered roller bearings from the two Hong Kong resellers for importation into, this country, challenged Commerce’s determination before the Court of International Trade, which upheld Commerce’s decision. We agree with the Court of International Trade that Commerce provided the degree of notice required by statute and regulation, and that the use of a BIA-based antidumping rate was not unlawful.

r

A

In an antidumping investigation covering goods exported from a country with a market-based economy, Commerce sets individual antidumping duty rates for investigated companies. Entries from other companies are subject to an “all others” rate, which is typically computed as a weighted average of the individual rates. Thereafter, a company is subject to either its individual rate or the all others rate unless the rate is changed as a result of an administrative review of the dumping order conducted pursuant to 19 U.S.C. § 1675. An interested party, typically a member of the affected domestic industry, may request a review of a particular exporter if it believes the current-rate for that exporter is too low. Conversely, an exporter may request a review of its own exports if it believes its rate is too high.

Before 1991, Commerce used the combination of individual rates and an all others rate for antidumping investigations of imports not only from market economy countries, but also - from countries. with nonmarket economies (“NMEs”) such as China. In 1991, however, Commerce reversed course and decided that individual rates were not appropriate in an NME setting. See Iron - Construction Castings From the People’s Republic of China; Final Results of Antidumping Duty Administrative Review, 56 Fed.Reg. 2742, 2744 (Jan. 24, 1991); Final Determination of Sales at Less than Fair Value: Sparklers From the People’s Republic of China, 56 Fed.Reg. 20,588, 20,589 (May 6, 1991). Instead, Commerce determined that NME exporters would be subject to a single, countrywide antidumping duty rate unless they could demonstrate legal, financial, and economic independence from the Chinese government (referred to by Commerce as “the NME entity”). 56 Fed. Reg. at 2744.

This court upheld the application of this “NME presumption” in Sigma Corp. v. United States, 117 F.3d 1401 (Fed.Cir.1997). Under the NME presumption, a company that fails to demonstrate independence from the- NME entity is subject to the countrywide rate, while a company that demonstrates its independence is entitled to an individual rate as in a market economy. Id. at 1405-06. The Court of International Trade has stated that when an NME rate is used in conjunction with individual rates,, it is unnecessary for Commerce to calculate an all others rate since all exporters have, at least in theory, been reviewed. Transcom, Inc. v. United States, 5 F.Supp.2d 984, 989 (Ct. Int’l Trade 1998).

B

In 1986, Commerce launched an anti-dumping investigation of Chinese-manu *1374 factured tapered roller bearings in response to a request from the Timken Company, a domestic producer of tapered roller bearings. The investigation ultimately led to the establishment of dumping margins for two entities. The first, the state-controlled China National Machinery and Equipment Import and Export Corporation (“CMEC”), which was then the only exporter of tapered roller bearings from China, received an anti-dumping duty rate of 4.69%. The second, Premier Bearing & Equipment, Ltd. (“Premier”), a Hong Kong-based trading company, received an antidumping duty rate of 0.97%. Commerce also established an all others rate of'2.96% for other potential Chinese exporters of tapered roller bearings. Tapered Roller Bearings From the People’s Republic of China; Amendment to Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order in Accordance With Decision Upon Remand, 55 Fed.Reg. 6669 (Feb. 26, 1990).

The final results of the first two annual reviews, which covered the period from February 1987 to May 1989, were published on January 2, 1991. In those reviews, Commerce had not yet begun the practice of applying the NME presumption. The reviews, which covered only Premier, left intact both Premier’s antidumping duty rate of 0.97% and the all others rate of 2.96%. Commerce also established a “new shipper rate” of. 0.97% for exporters whose first shipment from China occurred after May 31, 1989. Final Results of Anti-dumping Duty Administrative Reviews: Tapered Roller Bearings and Parts Thereof From the People’s Republic of China, 56 Fed.Reg. 66 (Jan. 2,1991).

In the third administrative review, which covered the period from June 1989 to May 1990, Commerce changed its methodology for setting rates. In response to requests from various Chinese exporters, Commerce established eight company-specific dumping margins. Commerce also explained that it was abandoning its use of the new shipper rate. Instead, Commerce stated that all shippers not having an individual rate would be subject to the all others rate, which would be equal to the highest rate for any reviewed firm and adjusted accordingly in each successive administrative review. Commerce therefore changed the rates for all Chinese exporters of tapered roller bearings, even though some of the affected companies were not listed in the notice of initiation for the review. Final Results of Antidumping Duty Administrative Review: Tapered Roller Bearings and Parts Thereof From the People’s Republic of China, 56 Fed. Reg. 67,590 (Dec. 31,1991).

On appeal of the third administrative review, the Court of International Trade held that Commerce could not use the all others rate to adjust dumping margins for companies outside the scope of the review. UCF Am. Inc. v. United States, 870 F.Supp. 1120, 1128 (Ct. Int’l Trade 1994) (“UCF I”). Accordingly, Commerce reinstated the 2.96% rate for those exporters on remand. In doing so, however, Commerce labeled that rate a “PRC rate” rather than an “all others” rate. The Court of International Trade struck down that practice, noting that a single countrywide rate did not take into account independent exporters. within China and would lead to excessive complexity in conducting administrative reviews. UCF Am. Inc. v. United States, 919 F.Supp. 435, 440-41 (Ct. Int’l Trade 1996) (“UCF II”).

Before the completion of judicial review of the results of the third administrative review, Commerce initiated the fourth, fifth, and sixth administrative reviews, covering June 1990 through May 1993. In the notices of initiation for each of those reviews, Commerce listed 43 companies *1375 that it believed were exporters of tapered roller bearings.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

YC Rubber Co. (N. Am.) LLC v. United States
2026 CIT 24 (Court of International Trade, 2026)
Nanjing Dongsheng Shelf Mfg. Co., Ltd. v. United States
2025 CIT 76 (Court of International Trade, 2025)
Goodluck India Ltd. v. United States
670 F. Supp. 3d 1353 (Court of International Trade, 2023)
Pirelli Tyre Co. v. United States
2023 CIT 86 (Court of International Trade, 2023)
Repwire LLC v. United States
628 F. Supp. 3d 1288 (Court of International Trade, 2023)
China Manufacturers Alliance v. United States
1 F.4th 1028 (Federal Circuit, 2021)
Guizhou Tyre Co. v. United States
469 F. Supp. 3d 1338 (Court of International Trade, 2020)
Nat'l Nail Corp. v. United States
390 F. Supp. 3d 1356 (Court of International Trade, 2019)
Tai-Ao Aluminium (Taishan) Co. v. United States
391 F. Supp. 3d 1301 (Court of International Trade, 2019)
Thuan an Production Trading & Serv. Co., Ltd. v. United States
348 F. Supp. 3d 1340 (Court of International Trade, 2018)
Coal. for Fair Trade in Garlic v. United States
312 F. Supp. 3d 1372 (Court of International Trade, 2018)
Linyi Bonn Flooring Manufacturing Co. v. United States
222 F. Supp. 3d 1274 (Court of International Trade, 2017)
Diamond Sawblades Manufacturers' Coalition v. United States
219 F. Supp. 3d 1368 (Court of International Trade, 2017)
China Mfrs. All., LLC v. United States
2017 CIT 12 (Court of International Trade, 2017)
Viet I-Mei Frozen Foods Co. v. United States
839 F.3d 1099 (Federal Circuit, 2016)
Ad Hoc Shrimp Trade Action Committee v. United States
802 F.3d 1339 (Federal Circuit, 2015)
Jiangsu Jiasheng Photovoltaic Technology Co. v. United States
28 F. Supp. 3d 1317 (Court of International Trade, 2014)
Michaels Stores, Inc. v. United States
766 F.3d 1388 (Federal Circuit, 2014)

Cite This Page — Counsel Stack

Bluebook (online)
294 F.3d 1371, 24 I.T.R.D. (BNA) 1225, 2002 U.S. App. LEXIS 12723, 2002 WL 1378723, Counsel Stack Legal Research, https://law.counselstack.com/opinion/transcom-inc-and-l-s-bearing-company-v-united-states-and-the-timken-cafc-2002.