Home/U.S. Circuit Court for the District of Western Pennsylvania/Stirling Co. v. Rust Boiler Co.

Stirling Co. v. Rust Boiler Co.

144 F. 842, 1906 U.S. App. LEXIS 4731
CourtU.S. Circuit Court for the District of Western Pennsylvania
DecidedFebruary 26, 1906
DocketNo. 10
StatusPublished
Cited by1 cases

This text of 144 F. 842 (Stirling Co. v. Rust Boiler Co.) is published on Counsel Stack Legal Research, covering U.S. Circuit Court for the District of Western Pennsylvania primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Stirling Co. v. Rust Boiler Co., 144 F. 842, 1906 U.S. App. LEXIS 4731 (circtwdpa 1906).

Opinion

BUFFINGTON, District Judge.

This is a bill in equity brought by the Stirling Company against the Rust Boiler Company. It charges infringement of claims 1, 2, 3, 5, and 11 of patent No. 680,707, for a steam boiler, granted August 20, 1901, to Frank M. Faber, assignor to complainant. The defenses are invalidity of the patent and noninfringement. In water tube boilers, a general continuous circulation through the tubes is desirable, since thereby tire entire water body is subjected to higher heat conditions, more rapid heat transference is secured, and a wider diffused uniformity of water temperature is had. It will thus be seen that maximum rapidity in steam raising, with less liability to burn out a boiler in spots is secured. Such a general main circulation is created, and results from the general plan on which the boiler is built. In addition to such general circulation what are known as “local minor circulations” exist. These have no fixed or determinate courses or times of beginning, continuing, or ending. They result from local, shifting, and uncontrolled causes, or factors. Since the tendency of hotter water is to rise and of cooler to sink, it will be seen that local heat conditions may at times cause some tubes in the same bank to draw upward and some downward, and indeed, the hotter side of one tube to drive water nearest it upward, and while the' cooler side of the same tube draws downward. Such inequality and variations in heat conditions result from fuel, draft, and other factors. For instance, fresh fuel on one [843]*843pide of a boiler grate and an incandescent bed of coals on the other -.nay cause wide divergence of heat, and, therefore, different current courses in the same bank of tubes. It will thus be seen that, generally speaking, main circulations are created by the structural type of the boiler; local circulations by operative conditions. Now, prior Lo Faber’s patent, it was well known that these main circulations in boilers could be created by certain structural features, and that such main circulations could be either of a general or sectional character. As illustrating a sectional circulation; that is, a continuous, designed circulation, covering a section only of a boiler system, we may refer to the current between the front upper steam drum and front lower mud drum of the boiler shown in the accompanying Fig. 6 of Pierpoint's patent, No. 529,306, of November 13, 1894.

Here the water, after passing through the rear mud drum and the rear and center upper drums, finally enters the forward upper drum, 4d. By reason of a bank of tubes connecting the latter drum with forward mud drum, Id, and by reason of the baffler, 16d, placed between tubes, lid, and lñd, of the connecting bank, the water is made to travel in the section of the boiler system composed of the forward tipper and lower drums and their connecting tubes. Of course, in such section, varying heat and draft conditions may start temporary [844]*844local currents from time to time. On the other hand, a boiler embodying a main or general circulation is seen in the accompanying figure taken from Stirling’s patent, No. 479,678, of July 26, 1892.

Apart from its feed water system, which need not be referred to, the boiler has two upper drums, each connected to the single mud drum, and' connected to each other by water passages. By means of a baffler interposed between the tubes - leading from the two upper drums to the mud drum a current upward in the front bank is created. This causes a main general circulation through the whole working [845]*845part of the boiler, and of so pronounced a character as to have gained for itself the distinctive name of the Stirling cycle of circulation. Of course, as said above of the sectional system, there are also in this general system local circulations from time to time, which are caused by varying fuel and draft conditions. Now Faber’s boiler is of the sectional type, and a study of his patent shows that his device, and all the heat and current controlling factors used, were employed not only to create and maintain sectional currents, but to exclude therefrom a main or general circulation. This boiler is shown in the accompanying cut.

[846]*846Without referring to the feed water system, and confining ourselves to the working sections, we have an upper rear steam and water drum and a lower rear mud drum connected by banks of tubes. By the interposition of a baffler between the forward and the rear parts of this bank, the forward tubes create an upward and the rear a downward current between the two drums composing that section. So, also, the forward upper drpm and the forward lower drum, by a baffler placed in the same way in the midst of the connecting bank of tubes, create another and similar sectional current. It will be noted that not only are these sectional currents created by the functional arrangement of the several rows of tubes, but by the omission of any water connection between the upper drums the main or general Stirling cycle of circulation has no pathway in which to travel and cannot exist in Faber’s device. The “separate,” “distinct,” “independent,” and “directed” characters of these sectional currents are specified as constituting the invention. The patentee’s words are:

“liy ■ invention relates to water-tube boilers, its object being to provide for the proper circulation of the water between two separate steam and water drums and. a lower mud drum, so that two distinct and independent cycles of circulation are established and the flame and heated products of combustion are so directed as to properly generate and maintain such cycles of circulation.”

And moreover,' the sectional character of the two parts of the boiler are recognized where the patentee described certain baffle walls, tubes,, etc., as “forming part of the front cycle of circulation” and others as “forming part of the rear cycle of circulation.” The operation of the device in its different sections is thus described:

“The natural result is a cycle of circulation from the mud drum up through the tubes, 15, to the steam and water drum, 1, and thence back to the mud drum through the tubes, 16. In the same manner a separate cycle of circulation is established from the mud drum up through the tubes, 17, to the steam and wafer drum, 2, and thence back to the mud drum through the tubes, 18. The partition, 4 [shown in an alternative single mud drum construction, Fig: 1 of Patent], serves to separate these two cycles of circulation, and prevents each from interfering with, cheeking or modifying the operation of the other. * . * * The steam in this way is collected quickly into the two upper drums, from which it can pass from two distinct cycles of circulation.”

It will thus be seen that the averred and only object of the patentee and the only device disclosed was one for the existence of sectional, and the nonexistence of general, cycles of circulation. Now the respondent’s structure, which is shown in the cut on the opposite page is built to create and maintain a main, nonsectional cycle. In it are two upper drums, the water spaces of which are connected by a bank of tubes; and two lower drums also connected by a bank of tubes. The two forward drums are connected by five rows of tubes placed in front of the single baffle wall of the plant and the two rear drums are likewise connected ,by five rows in the rear of such baffle wall. The proofs show that at one of the tests the highest temperature of

[847]

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Crown Overall Manufacturing Co. v. Levy Overall Manufacturing Co.
16 Ohio N.P. (n.s.) 561 (Ohio Superior Court, Cincinnati, 1914)

Cite This Page — Counsel Stack

Bluebook (online)
144 F. 842, 1906 U.S. App. LEXIS 4731, Counsel Stack Legal Research, https://law.counselstack.com/opinion/stirling-co-v-rust-boiler-co-circtwdpa-1906.