Reiss Steamship Company v. United States Steel Corporation, Pittsburgh Steamship Division

374 F.2d 142, 1967 U.S. App. LEXIS 7072
CourtCourt of Appeals for the Sixth Circuit
DecidedMarch 16, 1967
Docket16716_1
StatusPublished
Cited by1 cases

This text of 374 F.2d 142 (Reiss Steamship Company v. United States Steel Corporation, Pittsburgh Steamship Division) is published on Counsel Stack Legal Research, covering Court of Appeals for the Sixth Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Reiss Steamship Company v. United States Steel Corporation, Pittsburgh Steamship Division, 374 F.2d 142, 1967 U.S. App. LEXIS 7072 (6th Cir. 1967).

Opinion

374 F.2d 142

The REISS STEAMSHIP COMPANY, Libelant and Cross-Respondent-Appellee,
v.
UNITED STATES STEEL CORPORATION, PITTSBURGH STEAMSHIP DIVISION, Respondent and Cross-Libelant-Appellant.

No. 16716.

United States Court of Appeals Sixth Circuit.

March 16, 1967.

Robert G. McCreary, Jr., Cleveland, Ohio (Arter, Hadden, Wykoff & Van Duzer, David G. Davies, Cleveland, Ohio, on the brief), for appellant.

Thomas O. Murphy, Cleveland, Ohio (Thomas O. Murphy, John T. Jaeger, Johnson, Branand & Jaeger, Cleveland, Ohio, on the brief), for appellee.

Before EDWARDS, CELEBREZZE and PECK, Circuit Judges.

CELEBREZZE, Circuit Judge.

This is an appeal in admiralty. The Steamer J. L. Reiss, owned by the Libelant, and the Steamer Sewell Avery, owned by the Respondent, collided in the upper Saint Clair River at 5:45 a. m., September 24, 1962. After a lengthy trial in the District Court, the Sewell Avery was found to be solely at fault, and judgment was entered for the Libelant. The Respondent appeals.

Dense fog, the seaman's old adversary, once again created a dangerous condition with which two vessels were unable to cope. The fog, which obscured the movements of the two vessels, also obscured the manner in which they collided. Many of the facts, then, are not only in sharp dispute, but even irreconcilable.

The Steamer J. L. Reiss (Reiss) is 489 feet in length, 52 feet in beam, and is powered by a 1650 horsepower steam engine. The Steamer Sewell Avery (Avery) is 605 feet in length, 60 feet in beam, and is powered by a 2500 horsepower steam engine. Both vessels are equipped with radars.

On September 24, 1962, the Reiss was proceeding up the Saint Clair River, heading north to Two Rivers, Wisconsin laden with a cargo of coal. The Saint Clair River runs generally north and south, bounded on the west by the United States and on the east by Canada. The River in the vicinity of the collision is approximately 2,200 feet wide from shore to shore, and the navigable part of the River is about 1700 feet wide. At the same time, the Avery was proceeding down the Saint Clair River, heading south to Lorain, Ohio, laden with stone. The Reiss was proceeding on the east, or Canadian side of the River, and the Avery was proceeding on the west, or American side of the River.

Because of fog, the Reiss checked to half speed at approximately 4:50 a. m., near Russell Island. The current speed in that general area of the Saint Clair River was from two to three miles per hour. The speed of the Reiss over the ground was from four to five miles per hour. At 5:00 a. m., the Reiss monitored a radiotelephone call from the Avery stating that the Avery was going to anchor at Robert's Landing. Libelant's Exhibit No. 3 is reproduced to show the various movements of the two vessels.

NOTE: OPINION CONTAINING TABLE OR OTHER DATA THAT IS NOT VIEWABLE

When the Reiss was two miles below Robert's Landing Buoy (37),1 the Reiss observed the Avery on its radar, about a mile and two-tenths above the Reiss on the Canadian side of the River.2 At this time the Reiss was heading north on the Canadian side. Realizing the Avery was lying in the channel directly ahead of the projected path of the Reiss, the Reiss changed its course, crossing the River and proceeding upbound on the American side.3

When the Reiss reached Willow Point Light, the Captain of the Reiss noticed a pip on his radar which was the Avery moving away from the shore. When the Reiss was approximately 1,000 feet from the Avery,4 the Captain of the Reiss noticed the angle between the Avery and the Canadian shore become wider as the Avery moved quickly away from the shore. The radar showed the Avery moving across stream toward the American shore and downstream. The Captain of the Reiss explained this situation when he testified:

"* * * all of a sudden, when you have a clear-sky section, an angle broke away from the Canadian side of the bank, and the target appeared so large and leaving a smear or trail behind, it was quite a surprise. Then I realized I was in trouble at this sudden change of the target from my right."

At this point the First Mate of the Reiss was ordered to call the Avery and inform her that they "were drifting or moving fast", and that they were "drifting down upon" the Reiss. The Avery did not respond to this call. The First Mate was then ordered to go to the fore-castle deck and stand by the anchor. The Captain of the Reiss testified he did not know what the Avery's intentions were.

The Reiss visually sighted the Avery for the first time when the two vessels were approximately three hundred feet apart. The Reiss was moving at bare steerageway, two to three miles per hour. The Captain of the Reiss ordered the rudder hard left, and the engines full speed ahead for five seconds, and then reversed the engines. The purpose of this maneuver was to avoid a direct blow. The stem of the Avery struck several blows to the starboard side of the Reiss. The closing speed of the two vessels was variously estimated to be from two to eight miles per hour. Substantial damage was done to the Reiss.

The collision occurred at 5:45 a. m. The crew of the Reiss placed the point of collision approximately three-quarters of a mile south of Robert's Landing Buoy No. 37, and close to the American side.5 Independent testimony supported this location. The Avery's crew placed the collision in various locations, one such location was approximately seven-tenths of a mile south of Robert's Landing Buoy No. 37.6

After the collision the Reiss was approximately 250 to 300 feet off the American shore. The Captain of the Reiss testified that by using a combination of reversing his engines and dropping an anchor, he could stop within 50 to 60 feet.

According to the crew of the Avery, the Avery went to anchor at 5:00 a. m., because of the fog. From that time until the time of collision, the Avery continued to sound the signal of a ship at anchor. The Avery gave a radio call that it was going to anchor in the vicinity of Robert's Landing, near the American shore.

When the Avery's stern anchor was dropped, the bow of the Avery was headed 190 degrees, or almost due south. Seventy fathoms, or 420 feet of anchor were let out. The Avery then dropped her starboard anchor. Subsequently, the stern of the Avery swung to the left, toward the Canadian shore. The bow swung from 190 degrees to 220 degrees. To correct this movement, the Captain of the Avery ordered some of the chain of the stern anchor taken in. Due to the fact that a pin had sheared on the stern anchor windlass, the stern anchor could not be retrieved. To bring the vessel back to a heading of 190 degrees and thus straighten out the swing of the Avery's stern, the Captain ordered slow speed ahead at 5:25 a. m., half speed ahead at 5:27 a. m., and full speed ahead at 5:32 a. m.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
374 F.2d 142, 1967 U.S. App. LEXIS 7072, Counsel Stack Legal Research, https://law.counselstack.com/opinion/reiss-steamship-company-v-united-states-steel-corporation-pittsburgh-ca6-1967.