Proformance Manufacturing, Inc. v. Teel Plastics, Inc.

CourtCourt of Appeals of Wisconsin
DecidedApril 30, 2020
Docket2018AP001052
StatusUnpublished

This text of Proformance Manufacturing, Inc. v. Teel Plastics, Inc. (Proformance Manufacturing, Inc. v. Teel Plastics, Inc.) is published on Counsel Stack Legal Research, covering Court of Appeals of Wisconsin primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Proformance Manufacturing, Inc. v. Teel Plastics, Inc., (Wis. Ct. App. 2020).

Opinion

COURT OF APPEALS DECISION NOTICE DATED AND FILED This opinion is subject to further editing. If published, the official version will appear in the bound volume of the Official Reports. April 30, 2020 A party may file with the Supreme Court a Sheila T. Reiff petition to review an adverse decision by the Clerk of Court of Appeals Court of Appeals. See WIS. STAT. § 808.10 and RULE 809.62.

Appeal No. 2018AP1052 Cir. Ct. No. 2015CV1253

STATE OF WISCONSIN IN COURT OF APPEALS DISTRICT IV

PROFORMANCE MANUFACTURING, INC.,

PLAINTIFF-APPELLANT-CROSS-RESPONDENT,

V.

TEEL PLASTICS, INC.,

DEFENDANT-RESPONDENT-CROSS-APPELLANT.

APPEAL and CROSS-APPEAL from a judgment of the circuit court for Dane County: JULIE GENOVESE, Judge. Affirmed.

Before Fitzpatrick, P.J., Blanchard and Kloppenburg, JJ.

¶1 FITZPATRICK, P.J. Proformance Manufacturing, Inc. and Teel Plastics, Inc. entered into two contracts concerning a fiberglass window system. 1 1 For convenience, we will refer to Proformance Manufacturing, Inc. as “PMI” and Teel Plastics, Inc. as “Teel.” No. 2018AP1052

PMI brought suit against Teel in the Dane County Circuit Court alleging, among other things, that Teel breached those contracts and that Teel was unjustly enriched.2 A jury found that Teel breached both contracts and awarded PMI $3,000,000 in damages based on those breaches.3 The jury also found that Teel was unjustly enriched by its actions and awarded PMI $2,000,000 in damages on that claim.

¶2 PMI filed postverdict motions in the circuit court requesting: (1) an award of attorney fees incurred in this litigation; and (2) an award of preverdict interest on the damages awarded by the jury. Teel filed postverdict motions requesting that the circuit court: (1) change the jury’s answers to special verdict questions concerning the unjust enrichment claim and breach of contract damages; (2) grant a new trial because the circuit court did not read to the jury Teel’s proposed instructions on partnerships and patent law; (3) grant a new trial in the interests of justice because PMI argued to the jury that a partnership existed between the parties; and (4) grant a new trial on aspects of the breach of contract claim.

¶3 The circuit court denied each of the postverdict motions with one exception. The circuit court granted Teel’s request to change the answers to the unjust enrichment claim questions in the special verdict. This ruling had the effect

2 PMI does not appeal the circuit court’s dismissal of its fraud and conversion claims. 3 The jury also found that Teel breached its duty of good faith and fair dealing that Teel owed to PMI related to each contract. The parties do not contend that the jury’s answers to those questions on the special verdict are material to our analysis. With a few exceptions, we will also ignore the breach of good faith and fair dealing findings by the jury.

2 No. 2018AP1052

of negating the jury’s $2,000,000 award of damages to PMI for that cause of action.

¶4 PMI appeals, Teel cross-appeals, and we affirm the circuit court’s orders on the postverdict motions.

BACKGROUND

¶5 The following facts are consistent with the jury’s answers to the special verdict questions and the circuit court’s postverdict decisions.

The Parties and the ECOSTAR Windows

¶6 Beginning in 2002, and for several years, PMI assembled, fabricated, and sold windows designed by other companies. In 2011, PMI began selling a window system it designed, called ECOSTAR.

¶7 Teel was primarily a plastics-related company and did not make windows. PMI hired several suppliers, including Teel, to provide parts for its ECOSTAR windows. As part of that process, Teel converted PMI’s window designs into engineering drawings. Appearing on the engineering drawings prepared by Teel for the ECOSTAR window system were PMI’s name and PMI’s copyright claim.

Contacts Between Teel and Hardie

¶8 A large house-siding company, James Hardie (which we will refer to as “Hardie”), learned of the ECOSTAR window system. Hardie contacted Teel in July 2011 about the ECOSTAR windows, not realizing that the system was designed, and owned, by PMI. Hardie told Teel at that time that it wanted to

3 No. 2018AP1052

acquire a new, unique window system, be the ultimate manufacturer of that system, and have as its own design one that was already available.

¶9 In response, Teel told Hardie that it looked forward to “explor[ing] the possibilities to work with [Hardie] on a new window system,” without telling Hardie that the ECOSTAR window design belonged to PMI. As part of that response, Teel sent to Hardie already-existing photos of PMI’s ECOSTAR windows. Before sending the photos to Hardie, Teel changed the photos’ captions from stating “PMI Casement” to “Teel designed Casement Window.”

¶10 Hardie told Teel as early as August 11, 2011, that it was interested in purchasing Teel’s plastic pultrusion division. Teel responded to that interest by presenting Hardie with engineering drawings for the ECOSTAR windows. Those drawings were copies of PMI’s ECOSTAR window system drawings but were changed by Teel to refer to the window system as the “Hardie Concept Profile Drawings.” Before sending the drawings to Hardie, Teel also replaced the ECOSTAR and PMI name on the drawings with “James Hardie Window & Door Systems.” Teel further changed the drawings sent to Hardie to falsely reflect that Teel held the copyright to those drawings and the rights to the designs.

¶11 In mid-August 2011, Teel was in possession of confidential cost information provided by PMI to Teel for the ECOSTAR window system. When Hardie requested the information, Teel sent PMI’s confidential cost information to Hardie, and Teel represented that the information was its own.

Teel-PMI Communications and Contracts

¶12 Also in mid-August 2011, a Teel employee contacted PMI requesting permission to show a completed PMI ECOSTAR window to a

4 No. 2018AP1052

company not named by Teel. PMI agreed, but told Teel that PMI’s proprietary information must be kept secret, including the drawings for the window.

¶13 On August 30, 2011, Teel representatives met with PMI representatives and told PMI that Teel had a large customer interested in PMI’s ECOSTAR window system. Teel did not disclose the name of the potential customer to PMI at that time. Nor did Teel disclose to PMI that, as already described, it had taken credit for PMI’s design in communications with Hardie, changed the description of who owned the design on photos Teel sent to Hardie, and gave to Hardie PMI’s cost information for the ECOSTAR windows.

¶14 At the same meeting with PMI, Teel claimed for the first time that it owned some rights in the ECOSTAR window system. Teel offered to make PMI party to any agreement with the unnamed prospective customer in exchange for Teel acquiring an ownership interest in the ECOSTAR window system.

¶15 PMI entered into an oral agreement with Teel on August 30, 2011. The parties refer to this as the “50/50 agreement,” and so shall we. In the 50/50 agreement, PMI agreed with Teel to sell the PMI ECOSTAR window system to Teel’s as-of-then-undisclosed customer and to get that customer into the fiberglass window and door business using PMI’s window design. Teel and PMI also agreed to split ownership rights to the ECOSTAR window design on an equal basis. That same day, to effectuate the 50/50 agreement, Jerry Beranek of PMI sent PMI’s patent consultant an email stating:

Eric [Rapp, the owner of PMI] and I met with the folks from Teel earlier today, we discussed the design patent potential of the window designs among other things.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Sprague v. Ticonic National Bank
307 U.S. 161 (Supreme Court, 1939)
Kansas v. Colorado
533 U.S. 1 (Supreme Court, 2001)
Weiss v. United Fire & Casualty Co.
541 N.W.2d 753 (Wisconsin Supreme Court, 1995)
State v. Pettit
492 N.W.2d 633 (Court of Appeals of Wisconsin, 1992)
Carlson & Erickson Builders, Inc. v. Lampert Yards, Inc.
529 N.W.2d 905 (Wisconsin Supreme Court, 1995)
Beacon Bowl, Inc. v. Wisconsin Electric Power Co.
501 N.W.2d 788 (Wisconsin Supreme Court, 1993)
Roach v. Keane
243 N.W.2d 508 (Wisconsin Supreme Court, 1976)
Kramer v. Alpine Valley Resort, Inc.
321 N.W.2d 293 (Wisconsin Supreme Court, 1982)
Richman v. Security Savings & Loan Asso.
204 N.W.2d 511 (Wisconsin Supreme Court, 1973)
Ford Motor Co. v. Lyons
405 N.W.2d 354 (Court of Appeals of Wisconsin, 1987)
In RE MARRIAGE OF COOK v. Cook
560 N.W.2d 246 (Wisconsin Supreme Court, 1997)
Greenlee v. Rainbow Auction/Realty Co., Inc.
553 N.W.2d 257 (Court of Appeals of Wisconsin, 1996)
Schorsch v. Blader
563 N.W.2d 538 (Court of Appeals of Wisconsin, 1997)
Herman v. Milwaukee Children's Hospital
361 N.W.2d 297 (Court of Appeals of Wisconsin, 1984)
State v. Young
2009 WI App 22 (Court of Appeals of Wisconsin, 2008)
Vogel v. Grant-Lafayette Electric Cooperative
548 N.W.2d 829 (Wisconsin Supreme Court, 1996)
Nelson v. Travelers Insurance Co.
306 N.W.2d 71 (Wisconsin Supreme Court, 1981)
State v. Poellinger
451 N.W.2d 752 (Wisconsin Supreme Court, 1990)
United Cooperative v. Frontier FS Cooperative
2007 WI App 197 (Court of Appeals of Wisconsin, 2007)

Cite This Page — Counsel Stack

Bluebook (online)
Proformance Manufacturing, Inc. v. Teel Plastics, Inc., Counsel Stack Legal Research, https://law.counselstack.com/opinion/proformance-manufacturing-inc-v-teel-plastics-inc-wisctapp-2020.