Northern States Power Co. v. Commissioner

504 N.W.2d 34, 1993 Minn. LEXIS 515, 1993 WL 292436
CourtSupreme Court of Minnesota
DecidedAugust 6, 1993
DocketNo. C1-92-2197
StatusPublished

This text of 504 N.W.2d 34 (Northern States Power Co. v. Commissioner) is published on Counsel Stack Legal Research, covering Supreme Court of Minnesota primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Northern States Power Co. v. Commissioner, 504 N.W.2d 34, 1993 Minn. LEXIS 515, 1993 WL 292436 (Mich. 1993).

Opinion

GARDEBRING, Justice.

This case arises out of the denial by the Commissioner of Revenue (“Commissioner”) of a tax rebate sought by Northern States Power Company (“NSP”). At issue is whether equipment purchased by NSP qualifies for a sales tax refund under Minn. Stat. § 297A.01, subd. 16 (1986)1 (the “Capital Equipment Statute”). On stipulated facts, the tax court reversed the decision of the Commissioner and authorized the rebate. We affirm.

[35]*35In 1984, NSP2 was aware that within approximately four years, it would not be able to meet customer demand for electricity. Although it considered building a new power plant in Wisconsin, NSP decided that it was more economical to install new equipment and machinery in existing power plants. Between July 1985 and June 1987, NSP purchased equipment for installation into three of its power plants: the Riverside power plant (“Riverside”), the Black Dog power plant (“Black Dog”) and the Holland Wind Turbine Project (“Holland”). In July 1987, NSP filed a Claim for Refund with the Minnesota Department of Revenue (“Department”) for this same time period in the amount of approximately $493,-000, plus statutory interest. The refund was sought pursuant to Minn.Stat. § 297A.01, subd. 16, which provided a partial rebate of sales and use taxes paid on purchases of “capital equipment” when used for a “physical expansion” of an existing facility. Approximately $286,000 in the claimed refund was for equipment and machinery used at Riverside, $203,000 for equipment and machinery used at Black Dog, and $4,000 at Holland.

In August 1989 the Commissioner issued a proposed audit denying that part of the claim attributable to purchases made for the Riverside and Black Dog plants.3 After NSP filed a protest, the Commissioner denied the refund, concluding that NSP had purchased replacement equipment within the meaning of the statute because the purchases at issue were for “machinery or equipment performing substantially the same function [i.e., the production of electricity] in an existing facility.” Letter from Karen L. Barrett to Roger D. San-deen of 1/11/90, at 1 (discussing NSP’s protest of denial of sales tax refund). NSP timely appealed the Commissioner’s order to the tax court. In ruling in favor of NSP, the tax court concluded that although the equipment at issue replaced equipment that performed substantially the same function, it was not purchased in order to replace the retired equipment, but rather to expand production capacity.

At both Riverside and Black Dog, electricity is produced by boilers, turbines and generators. These three components form a “generating unit.” A power plant may have more than one generating unit, but each unit operates independently of other units. Each generating unit within NSP’s system is grouped into one of three categories depending on its level of use: peaking units, intermediate load units and base load units.4

The Riverside Project, which consisted of building a new generating unit (Unit No. 7), took place between December 1984 and July 1987 at a cost of approximately $60 million. Immediately prior to the installation of the new generating unit, the plant used four turbine/generators (Nos. 1, 2, 6, and 8). Turbine/generators Nos. 1, 2 and 6, due to be retired in 1987, were removed from service in 1985, but were left in place inside the plant. The result of the Riverside Project is that Unit No. 7 is able to produce 133 MW, which is 47 MW or 55% more than the combined capacity of turbine/generators Nos. 1, 2 and 6. Unit No. 7 is larger and more efficient than the older units and consequently is used more often than they were to produce electricity. While turbine/generators Nos. 1, 2 and 6 were used as an intermediate load unit, Unit No. 7 is a base load unit.

The Black Dog Project took place between 1984 and 1986 at a cost of approxi[36]*36mately $70 million. This project involved removing an already existing generating unit (Old Unit No. 2) from the Black Dog plant and installing a larger more productive unit (New Unit No. 2). The boiler of New Unit No. 2 uses a new combustion technology known as atmospheric fluidized bed combustion process (“AFBC”). AFBC allows the use of several types of fuel whereas the old boiler required a blend of high sulfur and low sulfur coal. This new technology reduces sulphur dioxide emissions by 40-90%5 and nitrogen oxide emissions by 70% from the process used in Old Unit No. 2. New Unit No. 2 is capable of producing 122 MW which is 39 MW6 or 47% more than Old Unit No. 2. New Unit No. 2 is larger and more efficient than Old No. 2. As a result, the newer unit is used as an intermediate load unit, whereas the old unit was used as a peaking unit.

This case turns on the meaning of several related statutes. In 1984, the legislature enacted a sales and use tax rebate which reduced the general sales tax rate from 6% to 4% for purchases of capital equipment. 1984 Minn. Laws ch. 502, art. 6, §§ 2, 4, and 7. The 2% rebate was obtained by paying the normal 6% rate on the equipment and then making an application to the Commissioner for a refund. Three statutory provisions were enacted to establish the rebate and the process for obtaining it: Minn.Stat. § 297A.01, subd. 16 (1986), the Capital Equipment Statute which defined “capital equipment”; Minn. Stat § 297A.02, subd. 2 (1986) which extended a 4% sales tax rate to “capital equipment”; and Minn.Stat. § 297A.15, subd. 5 (1986) which established the procedure for receiving a refund under these provisions. The Capital Equipment Statute states in relevant part:

Capital equipment means machinery and equipment and the materials and supplies necessary to construct or install the machinery or equipment. To qualify under this definition the capital equipment must be used by the purchaser * * * for manufacturing * * * a product to be sold at retail and must be used for the establishment of a new or the physical expansion of an existing manufacturing * * * facility in the state.7

Minn.Stat. § 297A.01, subd. 16 (1986). This provision is subject to an exception for replacement equipment.

Capital equipment does not include (1) machinery or equipment purchased or leased to replace machinery or equipment performing substantially the same function in an existing facility * * *.

Id.

The legislature also enacted another, separate sales tax rebate program in 1985, the “Distressed County Statute,” which allowed for a complete rebate of the 6% sales tax for “capital equipment” purchased for use in an economically distressed county. 1985 Minn.Laws, 1st Sp. Sess. ch. 14, art. 8, § 18. That statute states in part:

Purchase or use of equipment for use in an existing plant qualifies under this section and under section 297A.01, subdivision 16, as an expansion if either the production capacity of the plant is increased by at least 20 percent as a result or if the total capital investments made within a 12-month period exceed $25,-000,000.

Minn.Stat. § 297A.257, subd. 2 (1986) (emphasis added).

[37]

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Color-Ad Packaging, Inc. v. Commissioner of Revenue
428 N.W.2d 806 (Supreme Court of Minnesota, 1988)

Cite This Page — Counsel Stack

Bluebook (online)
504 N.W.2d 34, 1993 Minn. LEXIS 515, 1993 WL 292436, Counsel Stack Legal Research, https://law.counselstack.com/opinion/northern-states-power-co-v-commissioner-minn-1993.