McDATA Corp. v. Brocade Communications Systems, Inc.

233 F. Supp. 2d 1315, 65 U.S.P.Q. 2d (BNA) 1515, 2002 U.S. Dist. LEXIS 23891, 2002 WL 31760866
CourtDistrict Court, D. Colorado
DecidedDecember 6, 2002
DocketCIV.A.02-K-303 (BNB)
StatusPublished
Cited by1 cases

This text of 233 F. Supp. 2d 1315 (McDATA Corp. v. Brocade Communications Systems, Inc.) is published on Counsel Stack Legal Research, covering District Court, D. Colorado primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
McDATA Corp. v. Brocade Communications Systems, Inc., 233 F. Supp. 2d 1315, 65 U.S.P.Q. 2d (BNA) 1515, 2002 U.S. Dist. LEXIS 23891, 2002 WL 31760866 (D. Colo. 2002).

Opinion

ORDER ON MOTION FOR PRELIMINARY INJUNCTION

KANE, Senior District Judge.

This is a patent infringement action by McDATA Corp. (“McDATA”), a Delaware corporation based in Broomfield, Colorado, *1316 against Brocade Communications Systems, Inc. (“Brocade”), a Delaware corporation based in San Jose, California. McDATA asserts Brocade’s current generation of Fi-bre Channel products, the SilkWorm 3200, SilkWorm 3800 and SilkWorm 12000, infringe upon McDATA’s U.S. Patent No. 6,233,236 (“ ’236 Patent”). McDATA has moved for a preliminary injunction barring Brocade from distributing license keys for the software that uses, relies upon, and/or enables a user to access the allegedly infringing technology incorporated into the accused products.

The parties engaged in expedited discovery related to the issues presented by McDATA’s motion and submitted briefing on them before and after a five-day eviden-tiary hearing. In addition to the live testimony during this hearing, the parties submitted extensive designations of deposition testimony, including attached deposition exhibits; videotape excerpts of the depositions of two witnesses; sworn declarations and voluminous documentary evidence.

Having considered the briefing, testimony and evidence submitted by the parties, and being fully advised of the premises, I deny McDATA’s motion for preliminary injunction because it has failed to demonstrate it is likely to prevail over Brocade’s contract defense to this action. The findings of fact and conclusions of law supporting this decision are set out below. In light of the expedited and abbreviated nature of discovery and proceedings relating to McDATA’s motion, I caution the parties that these findings and conclusions are provisional and are intended only for the purpose for which they are made, which is determination of McDATA’s request for pretrial injunctive relief. See University of Texas v. Camenisch, 451 U.S. 390, 395, 101 S.Ct. 1830, 68 L.Ed.2d 175 (1981); Purdue Pharma L.P. v. Boehringer Ingelheim GmbH, 237 F.3d 1359, 1363 (Fed.Cir.2001). These findings are not binding on the parties at trial. Camenisch, 451 U.S. at 395, 101 S.Ct. 1830.

I. FACTUAL BACKGROUND

A. History and Relationship of the Parties

McDATA was founded in 1982 and for many years has been a leader in the development, manufacture, and sale of switches used in the storage area network (“SAN”) industry. McDATA’s focus is on high-end, director-class fabric switches, a segment of the switch market in which it held a leading market share as of the commencement of this action.

In approximately 1995, McDATA determined a new, high-speed interconnect technology called Fibre Channel was the medium of the future in this field and began efforts to enter the Fibre Channel switch market. Because it did not have in-house expertise in -this new technology, McDATA. sought the assistance of Brocade, a newly formed company focused on Fibre Channel technology. At that time, Brocade did not compete directly with McDATA in the director-class switch market segment.

In May 1996, McDATA and Brocade entered into a Purchase and License Agreement authorizing McDATA to purchase various Brocade components for repackaging and resale as part of McDATA’s first Fibre Channel switch. Later that year, the companies entered into an additional agreement, the 1996 Technology Agreement, in which McDATA engaged Brocade to modify two of Brocade’s first generation Fibre Channel ASICs, 1 its *1317 Stitch ASIC and FLannel ASIC, for use in a high-end, director-class Fibre Channel switch otherwise developed and produced by McDATA.

Pursuant to the 1996 Technology Agreement, Brocade provided McDATA with technical information regarding the design and function of the Stitch and FLannel ASICs and another non-director-class Brocade switch containing the Stitch ASIC, the SilkWorm 1000. This included information regarding the ability of these products to measure and report data traffic flow through a switch.

Brocade’s work with McDATA under the 1996 Technology Agreement resulted in its development of the Felt ASIC, a customized version of the Stitch ASIC, and the McFLannel ASIC, a customized version of the FLannel ASIC. McDATA incorporated Brocade’s Felt ASIC in the ED-5000, a director-class switch McDATA released in 1998.

At the same time that McDATA was working with Brocade to develop customized ASICs for its ED-5000 director-class switch, it was seeking other ways to build a position in the Fibre Channel switch market. McDATA’s efforts included its own development of a new ASIC, known as “Viper,” and, in March, 1997, its acquisition of Hewlett-Packard’s Canadian Network Operations division (“HP-CNO”), which was focused on Fibre Channel switch development and sales.

In October 1997, McDATA accused Brocade of misappropriating and using certain HP-CNO technology and demanded that Brocade pay it royalties. In the course of negotiations to resolve McDATA’s accusations, Brocade accused McDATA of misappropriating certain Brocade technology Brocade had disclosed to McDATA in 1996. The parties could not come to an agreement resolving their dispute and, on March 4, 1998, McDATA filed suit against Brocade for trade secret misappropriation. Brocade filed a counter-suit shortly thereafter.

Six days after Brocade filed suit, under pressure from its parent company and in need of assurances of an uninterrupted supply of Brocade ASICs, McDATA agreed to settle its suit against Brocade. Under the terms of the settlement, McDA-TA and Brocade agreed to dismiss their respective lawsuits with prejudice in return for amending their 1996 agreements: (1) to require McDATA to pay Brocade a total of $3 million for a fully paid up license on Brocade’s customized Felt and McFLannel ASICs; (2) to require Brocade to sell these ASICs to McDATA as long as McDATA was current on these license payments; and (3) to license to each other all of their other Fibre Channel intellectual property, including patents and know-how, in existence as of April 1,1998.

A few months later, in mid-1998, Hew-letb-Packard (“HP”) told Brocade it had won a competitive bid for HP’s purchase of Fibre Channel switches. HP subsequently informed Brocade, however, that due to certain terms of a contract between HP and McDATA (stemming from HP’s sale of HP-CNO to McDATA), HP was required to purchase its current generation switches from McDATA. HP therefore requested that Brocade enter into a three-way relationship with HP and McDATA under which Brocade would sell switch components to MeDATA for use in McDATA switches to be sold to HP. Based on its communications with HP, Brocade believed HP’s request and its decision not to purchase switches directly from Brocade were the result of legal threats by McDA-TA..

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Big O Tires, LLC v. Felix Bros., Inc.
724 F. Supp. 2d 1107 (D. Colorado, 2010)

Cite This Page — Counsel Stack

Bluebook (online)
233 F. Supp. 2d 1315, 65 U.S.P.Q. 2d (BNA) 1515, 2002 U.S. Dist. LEXIS 23891, 2002 WL 31760866, Counsel Stack Legal Research, https://law.counselstack.com/opinion/mcdata-corp-v-brocade-communications-systems-inc-cod-2002.