Lekas & Drivas, Inc. v. United States

33 Cust. Ct. 242, 1954 Cust. Ct. LEXIS 596
CourtUnited States Customs Court
DecidedNovember 23, 1954
DocketC. D. 1660
StatusPublished
Cited by9 cases

This text of 33 Cust. Ct. 242 (Lekas & Drivas, Inc. v. United States) is published on Counsel Stack Legal Research, covering United States Customs Court primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Lekas & Drivas, Inc. v. United States, 33 Cust. Ct. 242, 1954 Cust. Ct. LEXIS 596 (cusc 1954).

Opinion

Johnson, Judge:

This case involves three shipments of merchandise described on the invoices as “Feta Cheese,” entered for warehouse at the port of New York in February and April 1949. It was assessed with duty at 35 per centum ad valorem under paragraph 710 of the Tariff Act of 1930, as cheese, not specially provided for. While various claims are made in the protest, the one relied upon is that the merchandise is properly dutiable at 5 cents per pound, but not less than 25 per centum ad valorem, under said paragraph 710, as modified by the trade agreement with Argentina, T. D. 50504, as Pecorino cheese, in original loaves.

Paragraph 710, as originally enacted, and as modified, provides as follows:

Pah. 710 [Tariff Act of 1930], Cheese and substitutes therefor, 7 cents per pound, but not loss than 35 per centum ad valorem.
Pab. 710 [as modified by the trade agreement with Argentina, T. D. 50504]. Romano, Pecorino, Reggiano, Parmesano, Provoloni, Sbrinz, and Goya cheeses, in original loaves, 5j4 per lb., but not less than 25% ad valorem.

It was agreed at the trial that the merchandise was made from sheep’s milk and that, in its condition as imported, it was not suitable for grating.

Plaintiff called Theodore Drivas, who has been connected with the plaintiff corporation for 25 years. He testified that from 1928 to 1935 he had been manager of the firm’s office in Greece and that he had managed a cheese factory in Italy from 1925 to 1939. He had visited Italy in recent years, the last time being in 1952, and had observed the process of manufacture of Feta cheese in the factory of Kalantzi Brothers, the producer of the within merchandise.

Mr. Drivas testified that the cheese involved herein was imported in kegs containing 15 loaves, each weighing between 5 and 7 pounds, packed in layers, 3 pieces to a layer. According to his testimony and certain photographs received in evidence at the trial (plaintiff’s illustrative exhibits 1, 2, and 3), the individual pieces of cheese were triangular in shape, one side curved and the other two straight, forming a point. Three pieces, when placed together, composed a round layer of cheese.

Mr. Drivas described the manufacturing process as follows: Sterilized sheep’s milk is placed in a big vat and heated to a temperature of 60 degrees. Yeast is added, and the mixture is left to stand for an hour to an hour and a half, by which time it coagulates. The solid mass is cut into small pieces, which are placed in a round form, about 16 inches in diameter and 10 inches high. The material remains in the mold 2 or 3 hours to drain out the water (or whey) and is then cut into three sections by a “knife on squares.” The pieces [244]*244are kept for 5 to 7 days on wooden shelves, where they are turned from side to side and salted two or three times daily. They are held in shape by the salt and by pressure applied by boards on the shelves. After the processing is completed, the pieces are packed in kegs and shipped.

The witness stated that in the last 2 years his firm has also manufactured a 2-pound square loaf of Feta cheese, but it is produced by the use of different forms than those employed in making the within merchandise. A sample thereof, said to be of the same consistency as the 5- and 7-pound loaves, was received in evidence as plaintiff’s illustrative exhibit 4.

Mr. Drivas testified that the round form of the material could not be cured because it was too large. He explained that in that form it would take 30 to 60 days to cure and would then be a hard cheese, not a soft cheese, like the imported merchandise. He stated also that the product when in the round form is not a ripe cheese, cannot be sold, and is inedible. In his opinion, it is not Feta cheese until the processing on the shelves has been completed. He said that cutting it into triangular pieces is not done for the purpose of making it suitable for shipment, as it would be easier to pack in one round piece.

The witness was asked about Pecorino Eomano cheese, with which he was familiar, and he testified that it was made in a different type of mold than Feta cheese and was kept in the mold 5 or 6 days to take shape, after which it was removed and processed for 90 to 125 days. The result is a hard cheese in the same shape as it was when removed from the mold and is known to the witness as cheese, in the original loaf. Witness Drivas stated also that Provoloni cheese is not made in a mold but is shaped by hand in a cloth and is then cured for 60 days. It is a hard or a medium-soft cheese and is shipped in the form it became when shaped in the cloth.

Defendant called Jacob Moskowitz, who has been cheese examiner for the port of New York since June 1940. He testified that he has visited many cheese factories in the United States, has read practically all the literature on cheesemaking, and has come in personal contact with many manufacturers throughout the world. He said that he was familiar with the process by which Feta cheese is manufactured and that, in his opinion, Feta cheese is first achieved in the round mold after the whey has drained off. He explained:

Feta cheese is also a Feta cheese shortly after the whey is drawn from the coagulated milk, in that shape it takes on the production, the beginning of Feta cheese. The curing of cheese, the various aging and stages of curing results in the Feta cheese. Feta cheese is a soft cheese cured in that form, and subsequently it is cut for the purposes of handling and shipping. Feta cheese could be sold in the original form in which it is made.

[245]*245Mr. Moskowitz stated further that tbe product could be treated witb'salt when in tbe circular form and that several manufacturers in Italy start tbe curing process in tbe mold and merely cut up tbe piece for shipment. However, be bad never seen Feta cheese imported in tbe large circular form. He said that 50 per centum of all Feta cheese be examined was of tbe type described by Mr. Drivas and about 90 per centum was in barrels, packed in 5, 6, or 7 layers.

Since tbe record shows, and it has been agreed by counsel, that tbe merchandise is cheese made from sheep’s milk, it is classifiable as Pecorino cheese under paragraph 710, as modified, provided it has been imported in tbe original loaves. Fontana Hollywood Corp. v. United States, 30 Cust. Ct. 98, C. D. 1503. Tbe sole question before us is whether it is in original loaves. Plaintiff’s contention is that tbe triangular pieces are tbe original loaves, while tbe Government el aims that tbe round form from which tbe pieces were cut is tbe original loaf.

Tbe evidence establishes that during tbe course of manufacture tbe product is placed in a circular mold, but it is cut into sections before being removed from that mold and before tbe processing is completed. According to tbe uncontradicted testimony of Mr. Drivas, tbe product, when in tbe round form, not being completely processed, is not edible and is not salable. While Mr. Moskowitz stated that several manufacturers processed their product, or began to process it, in tbe round mold, be bad never seen an importation in that form.

Paragraph 710, as modified, provides for Pecorino and other cheese, in original loaves. Tbe term “cheese” is commonly used to designate a food product. Webster’s New International Dictionary (1953 edition); Encyclopaedia Britannica, volume 5, page 333; Kraft-Phenix Cheese Corporation v. Consolidated Beverage, Ltd., 107 F.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Makris Bros. v. United States
37 Cust. Ct. 282 (U.S. Customs Court, 1956)
Aeolian Shipping Co. v. United States
35 Cust. Ct. 346 (U.S. Customs Court, 1955)
Antolini v. United States
35 Cust. Ct. 209 (U.S. Customs Court, 1955)
Lekas & Drivas, Inc. v. United States
34 Cust. Ct. 352 (U.S. Customs Court, 1955)
Mallars v. United States
34 Cust. Ct. 345 (U.S. Customs Court, 1955)
John Alban & Co. v. United States
34 Cust. Ct. 299 (U.S. Customs Court, 1955)
Della Cella v. United States
34 Cust. Ct. 299 (U.S. Customs Court, 1955)
Bel Paese Sales Co. v. United States
34 Cust. Ct. 299 (U.S. Customs Court, 1955)

Cite This Page — Counsel Stack

Bluebook (online)
33 Cust. Ct. 242, 1954 Cust. Ct. LEXIS 596, Counsel Stack Legal Research, https://law.counselstack.com/opinion/lekas-drivas-inc-v-united-states-cusc-1954.