Knowles Foundry & Machine Co. v. National Plate Glass Co.

274 Ill. App. 570, 1934 Ill. App. LEXIS 770
CourtAppellate Court of Illinois
DecidedMay 1, 1934
DocketGen. No. 36,992
StatusPublished
Cited by4 cases

This text of 274 Ill. App. 570 (Knowles Foundry & Machine Co. v. National Plate Glass Co.) is published on Counsel Stack Legal Research, covering Appellate Court of Illinois primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Knowles Foundry & Machine Co. v. National Plate Glass Co., 274 Ill. App. 570, 1934 Ill. App. LEXIS 770 (Ill. Ct. App. 1934).

Opinion

Mr. Presiding Justice Sullivan

delivered the opinion of the court.

Plaintiff, Knowles Foundry and Machine Company, sued defendant, National Plate Glass Company, to recover profits it alleged it would have realized if defendant had performed its contract. To plaintiff’s amended declaration, as amended, defendant filed a general demurrer which was sustained by the court and, plaintiff electing to abide by its amended declaration, as amended, its suit was dismissed and judgment entered against it for costs.

Plaintiff’s amended declaration alleged that May 21, 1929, it entered into the following contract with defendant : (Pertinent portions only are set forth.)

“That: The Knowles Foundry and Machine Company shall supply to the National Plate Glass Company, at their plant in the City of Ottawa, State of Illinois, their entire requirement of Runner Bars for the Federal Division for a-period of two years beginning with the date of first delivery: That these Runners comprise substantially eliptical plates having lugs on one side to form a grinding face and having three • ears on the other side for mounting. That these Runners shall be of Grey Cast Iron. That the grinding face shall be machined to a plane surface. That the ears shall be drilled to one and three-quarter inches bore and have their outer faces machined. That these Runner Bars are of two sizes, the larger being approximately 60%" in the long diameter and 52%" in the short diameter; the smaller Runner being approximately 48%" in the long diameter and 41" in the short diameter. That the requirements above referred to are three large and seven small Runners, or approximately 10,900 pounds a day.
“That the National Plate Glass Company shall pay to the Knowles Foundry & Machine Company for the above mentioned Runner Bars at the rate of Ninety-Five Dollars per net ton, finished machined castings, F. O. B. cars at the plant of the National Plate Glass Company, Ottawa, Illinois, in carload lots.
“The above price is based on #2 Pig Iron at $20.00 per ton, Chicago, Ill., and is subject to revision each six months on the same basis, to-wit: If #2 Pig Iron drops to $19.00 the price of Bunners shall be $94.00.
“It is further agreed that the Knowles Foundry & Machine Company shall accept the return of scrap from the above Bunners at $13.50 per ton.
“It is agreed that delivery of Bunners under the above agreement shall begin approximately sixty days from the date hereof.” (Italics ours.)

The- amended declaration averred that at the time of the execution of the contract defendant had practically completed the erection and construction of its new plant known as the “Federal Division”; that runner bars were a vital and necessary operating requirement of its plant and that plate glass could not be completely manufactured without them; that, upon the execution of the contract, plaintiff enlarged its plant, installed the necessary machinery and purchased the necessary equipment, at a cost of approximately $45,000, for the purpose of creating sufficient capacity to produce, machine and deliver the daily tonnage requirements of defendant as" set forth in the contract; that plaintiff did all things that were necessary to supply the material and tonnage as required by defendant in the contract and delivered a large quantity of material in accordance with same; that, after the enlargement of its plant and the installation of the necessary machinery and equipment, it added to its operating personnel preparatory to manufacturing and delivering three large and seven small runner bars daily on and after July 21, 1929, and that it was ready to produce, machine and deliver same on July 21, 1929; that the year, as known in the business and trade of manufacturing glass in which defendant was engaged, consisted of 363 days and a further allowance of not to exceed 30 days for possible shut-down for repairs.

It further alleged that defendant failed and refused to take the material in the quantity and tonnage as specified in the contract, and thereby deprived plaintiff of the profit which it would have earned had it been allowed to produce and deliver to defendant the quantity of material defendant agreed to take; that, under the terms of the agreement, defendant was to take and pay for approximately 10,900 pounds of the material a day as specified in the contract, delivery to defendant to begin about July 21, 1929; that plaintiff was at all times ready and willing to deliver the material in the specified tonnage, but defendant refused to order from plaintiff and accept deliveries under the contract until on or about October 22, 1929, when it did accept delivery of one carload, and October 31$ 1929, when it accepted delivery of another carload; that defendant did not order or’take any tonnage for the months of July, August, September, November and December, 1929; and that for the period from July 21, 1929, to December 21,1929, defendant was delinquent in ordering and accepting delivery of 707.30 tons of runner bars in accordance with the terms of the contract.

It is also alleged that for the year 1930 defendant ordered and accepted delivery of 939.20 tons and failed to order 959.20 tons; that for the seven months ending July 21, 1931, defendant ordered and accepted delivery of 839.72 tons and failed to order 267.68 tons, resulting in a total accumulative delinquency on the part of defendant for the two years covered by the contract of 1,934.18 tons; that, under the terms of the contract, it was entitled to the rate of $95 a ton for the material to be supplied during the life of the contract, subject to adjustment for price changes in the “#2 Pig Iron” market; that it invoiced all material delivered during 1929 and the first seven months of 1930 at $95 a ton, and at the rate of $93 a ton for deliveries made during the months of August and September, 1930, which price change was based on a price reduction in #2 pig iron; that thereafter the material delivered was invoiced at $85 a ton, which price was a special concession and not entirely based on the #2 pig iron market; that if defendant had taken the tonnage specified in the contract, it would have been required to take 3,796.80 tons during the two years ending July 21, 1931, and would have been required to pay plaintiff $344,243.20; that it refused to take 1,934.18 tons as provided in the agreement and pay the agreed price of $178,159.08 therefor; that plaintiff expended a large sum of money and incurred debts in enlarging1 and equipping its plant to produce, machine and deliver the material specified in the contract in definite quantities daily for the period of two years; and that the failure of defendant to accept and pay for such material in the daily quantity as specified deprived plaintiff of its profits to the extent of $98,168.74.

Plaintiff contends that, under the contract, defendant was required to take and pay for “three large and seven small Eunner Bars or approximately 10,900 pounds a day” for a period of two years.

Defendant’s theory is that the contract entered into by the parties, and set forth in the amended declaration, is a pure requirement contract, and that, inasmuch as the amended declaration and the amendment thereto fail to show that defendant did not take all of its runner requirements from plaintiff, no breach of the contract is alleged.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

South Parkway Building Corp. v. South Center Department Store, Inc.
153 N.E.2d 291 (Appellate Court of Illinois, 1958)
Wistain v. Phillips Petroleum Co.
110 N.E.2d 649 (Appellate Court of Illinois, 1953)
Agnell v. Illinois Bell Telephone Co.
109 N.E.2d 398 (Appellate Court of Illinois, 1952)
Knowles Foundry & Machine Co. v. National Plate Glass Co.
21 N.E.2d 913 (Appellate Court of Illinois, 1939)

Cite This Page — Counsel Stack

Bluebook (online)
274 Ill. App. 570, 1934 Ill. App. LEXIS 770, Counsel Stack Legal Research, https://law.counselstack.com/opinion/knowles-foundry-machine-co-v-national-plate-glass-co-illappct-1934.