Industrial Fasteners Group, American Importers Association v. The United States

710 F.2d 1576, 4 I.T.R.D. (BNA) 2153, 1983 U.S. App. LEXIS 13622
CourtCourt of Appeals for the Federal Circuit
DecidedJune 30, 1983
DocketAppeal 82-30
StatusPublished
Cited by20 cases

This text of 710 F.2d 1576 (Industrial Fasteners Group, American Importers Association v. The United States) is published on Counsel Stack Legal Research, covering Court of Appeals for the Federal Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Industrial Fasteners Group, American Importers Association v. The United States, 710 F.2d 1576, 4 I.T.R.D. (BNA) 2153, 1983 U.S. App. LEXIS 13622 (Fed. Cir. 1983).

Opinion

DAVIS, Circuit Judge.

Industrial Fasteners Group, American Importers Association (appellant or Industrial) 1 , appeals the judgment of the United States Court of International Trade (CIT)— together with the denial of appellant’s motion for rehearing and vacation of that judgment — in which the CIT affirmed the final, affirmative, countervailing duty determination and order of the International Trade Administration (ITA), United States Department of Commerce, in Certain Fasteners from India, 45 Fed.Reg. 48,607 (1980) . See Industrial Fasteners Group v. United States, 525 F.Supp. 885, 2 CIT 181 (1981), 542 F.Supp. 1019, ___ CIT ___ (1982) , slip op. 82-26 (April 19, 1982). Industrial asks review only of that portion of the CIT’s decision affirming ITA’s holding that the Government of India, via a policy of its Ministry of Commerce (Ministry), provided subsidies to exporters of certain industrial fasteners through the Cash Compensatory Support on Export (CCS) program. We affirm.

I

The events leading to this proceeding began with the filing with ITA of a petition by the Industrial Fasteners Institute of Cleveland, Ohio, on January 30, 1980. ITA then initiated an investigation of certain fasteners from India late in February 1980 by the publication in the Federal Register of a notice of the Initiation of Countervailing Duty Investigation, 45 Fed.Reg. 12,276 (Feb. 25, 1980). At that time, the Embassy of India was notified of the investigation and was requested to respond by March 26, 1980, to a questionnaire which included the following specific questions regarding the CCS program:

“(1) Explain the terms and conditions of the program alleged. How are the amounts of payments determined?
(2) Provide current English language copies of laws, regulations and schedules governing the program;
(3) If the program applies only to designated or approved industries, provide a *1578 listing of firms exporting the subject merchandise which have received assistance from the program in 1979, or in the most recent one year period for which information was available, and the amounts received;
(4) If the information in (3) above is not readily available, indicate the total amount paid during the same period to firms exporting the subject merchandise.”

India’s response to ITA’s questionnaire, received on March 26, 1980, stated that exporters of industrial fasteners are eligible to receive CCS of 17.5% of the f.o.b. value of their exported product as a refund of indirect taxes paid but not otherwise refunded. 2 In reply to the pivotal question how the 17.5% figure was established, India stated that it “has reasonably calculated and documented the actual tax experience” and explained that following the Alexander Committee’s review of the CCS program on October 23, 1978, India’s Ministry informed all Export Promotion Councils (EPCs), including the Engineering Export Promotion Council (EEPC) which oversees manufacturers of industrial fasteners, that it was restructuring the program to compensate fully for all types of indirect taxes paid by exporters on inputs which are not otherwise refunded. All EPCs were requested immediately to collect, compile and make available to the Ministry basic data regarding the products with which the EPCs were concerned. They were told that the following “broad criteria ... are likely to be accepted by Government for formulation of the new rates:”

(1) (a) Indirect taxes on inputs domestic or imported.
(b) High interest rates on working capital.
(c) High cost of capital goods.
(2) (a) Labor intensive industries.
(b) Product of SSI [small sector industry] and cottage sector.
(c) New products in new markets.
(d) Selected processed food, horticulture and agricultural products.
(e) Commodities and markets which suffer from high and discriminatory freight rates.

The Ministry requested the EPCs to select a representative number of manufacturing and exporting units spread throughout the country and to work out the average incidence of the various nonrefundable taxes, duties and levies imposed on inputs entering into the exported products. After receipt of the Ministry’s instructions, the EEPC instructed a random number of its approximately 300 members to prepare indirect tax calculations. Replies received were analyzed and sent to the Ministry, including tax calculations from six industrial fastener manufacturers provided by the EEPC. The Ministry then “carefully scrutinized” the tax data and announced on January 15, 1979 a CCS of 12.5% for industrial fasteners to be provided effective April 1,1979. After objections by the manufacturers to that figure as too low, the Ministry announced on March 31, 1979, a rate of 17.5% for industrial fasteners exported to the American continent.

Included with the Indian Government’s initial response to ITA’s questionnaire on the CCS program was an undated “Statement Showing Incidence of Indirect Taxes on F.O.B. Export Value/Anchor Bolts.” Claiming that this statement contained errors, India requested (by subsequent letter of April 7, 1980) the substitution of the “complete study relating to taxes on anchor bolts” which had been prepared by a Calcutta firm of cost accountants. That study, dated March 11, 1980, was said by the accountants to be a “study of indirect taxes payable/paid and its incidence on Cost Structure of Anchor Bolts exported to the U.S.A.” It included consideration of (1) sales tax and excise duty on new materials, sulphuric acid and anti-rust oil, and packing material; (2) entry tax on raw materials and hoop iron, leval (sic) and nails; (3) Joint *1579 Plant Committee CESS (not otherwise explained); (4) engineering goods export assistance fund levy; (5) steel development surcharge/levy; (6) steel import pooling fund levy; (7) port commissioners levy; (8) port congestion surcharges; (9) compulsory government inspection levy, and; (10) interest on duty drawback for a three-month period.

Because ITA determined that India was not a "country under the Agreement” on Subsidies and Countervailing Measures, the countervailing duty investigation was governed by section 303 of the Tariff Act of 1930, as amended by the Trade Agreements Act of 1979, 19 U.S.C. § 1303 (Supp. V 1981). 3 Section 1303(b) of the 1979 Act provides that countervailing duty “shall be imposed, under regulations prescribed by the administrative authority (as defined in section 1677(1) of this title), in accordance with subtitle IV of this chapter (relating to the imposition of countervailing duties) [19 U.S.C. §§ 1671 — 1677g (Supp. V 1981), as added by the Trade Agreements Act].” 4

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Firth Rixson Special Steels Ltd. v. United States
27 Ct. Int'l Trade 873 (Court of International Trade, 2003)
Crescent Foundry Co. Pvt. Ltd. v. United States
20 Ct. Int'l Trade 1469 (Court of International Trade, 1996)
NTN Bearing Corp. of America v. United States
19 Ct. Int'l Trade 1165 (Court of International Trade, 1995)
United States Steel Group—A Unit of USX Corp. v. United States
873 F. Supp. 673 (Court of International Trade, 1994)
NEC Home Electronics, Ltd. v. United States
18 Ct. Int'l Trade 336 (Court of International Trade, 1994)
Wheatland Tube Corp. v. United States
17 Ct. Int'l Trade 1230 (Court of International Trade, 1993)
Zenith Electronics Corporation v. United States
988 F.2d 1573 (Federal Circuit, 1993)
Zenith Electronics Corp. v. United States
988 F.2d 1573 (Federal Circuit, 1993)
A. Hirsh, Inc. v. United States
729 F. Supp. 1360 (Court of International Trade, 1990)
Rsi (India) Pvt., Ltd. v. United States
876 F.2d 1571 (Federal Circuit, 1989)
PPG Industries, Inc. v. United States
708 F. Supp. 1327 (Court of International Trade, 1989)
RSI (India) Pvt., Ltd. v. United States
687 F. Supp. 605 (Court of International Trade, 1988)
China National Metals & Minerals Import & Export Corp. v. United States
674 F. Supp. 1482 (Court of International Trade, 1987)
Alberta Pork Producers' Marketing Board v. United States
669 F. Supp. 445 (Court of International Trade, 1987)
Ceramica Regiomontanam, S.A. v. United States
636 F. Supp. 961 (Court of International Trade, 1986)
Carlisle Tire & Rubber Co. v. United States
622 F. Supp. 1071 (Court of International Trade, 1985)
Ambassador Division of Florsheim Shoe Co. v. United States
577 F. Supp. 1016 (Court of International Trade, 1983)

Cite This Page — Counsel Stack

Bluebook (online)
710 F.2d 1576, 4 I.T.R.D. (BNA) 2153, 1983 U.S. App. LEXIS 13622, Counsel Stack Legal Research, https://law.counselstack.com/opinion/industrial-fasteners-group-american-importers-association-v-the-united-cafc-1983.