Indep Equip Dlrs v. EPA

372 F.3d 420
CourtCourt of Appeals for the D.C. Circuit
DecidedJune 25, 2004
Docket03-1020
StatusPublished
Cited by1 cases

This text of 372 F.3d 420 (Indep Equip Dlrs v. EPA) is published on Counsel Stack Legal Research, covering Court of Appeals for the D.C. Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Indep Equip Dlrs v. EPA, 372 F.3d 420 (D.C. Cir. 2004).

Opinion

372 F.3d 420

INDEPENDENT EQUIPMENT DEALERS ASSOCIATION, Petitioner,
v.
ENVIRONMENTAL PROTECTION AGENCY, Respondent.
Engine Manufacturers Association, Intervenor.

No. 03-1020.

United States Court of Appeals, District of Columbia Circuit.

Argued February 10, 2004.

Decided June 25, 2004.

On Petition for Review of an Order of the Environmental Protection Agency.

William R. Weissman argued the cause for petitioner. On the briefs were LeAnn M. Johnson-Koch and James P. Rathvon.

Laurel A. Bedig, Attorney, U.S. Department of Justice, argued the cause for respondent. With her on the brief was Michael J. Horowitz, Attorney, U.S. Environmental Protection Agency.

Jed R. Mandel and Timothy A. French were on the brief for intervenor.

Before: ROGERS, GARLAND, and ROBERTS, Circuit Judges.

Opinion for the Court filed by Circuit Judge ROBERTS.

ROBERTS, Circuit Judge:

Petitioner Independent Equipment Dealers Association (IEDA) is a trade association of independent dealers of heavy construction and industrial equipment, such as cranes, large forklifts, and generators. IEDA dealers are "independent" in the sense that they are not affiliated with any manufacturer. In December 2002, IEDA wrote to EPA seeking EPA's concurrence in its interpretation of emissions regulations pertaining to "nonroad engines" — engines used in such heavy construction and industrial equipment. See generally 40 C.F.R. pt. 89. Four weeks later, EPA replied that it did not concur in IEDA's proffered interpretation. IEDA then filed this petition for review claiming that EPA, by its letter, had substantively amended its regulations concerning nonroad engines, and in so doing had failed to comply with the notice-and-comment requirements of Section 307(d) of the Clean Air Act, 42 U.S.C. § 7607(d)(3). IEDA alternatively contends that EPA's letter violated the Clean Air Act's prohibition on agency action that is arbitrary or capricious.. See id. § 7607(d)(9)(A). We conclude that we lack jurisdiction and accordingly dismiss the petition for review.

I.

Since 1996, EPA has regulated nonroad engines by requiring their manufacturers to obtain a "certificate of conformity" indicating compliance with EPA emissions standards before selling such engines or importing them into the United States. 40 C.F.R. §§ 89.105, 89.1003(a)(1); see also 42 U.S.C. § 7547(a) (authorizing regulation of nonroad engines); id. § 7522(a)(1) (prohibiting the sale, distribution, or importation of any uncertified new motor vehicle engine). Manufacturers are not required to obtain certificates of conformity for each individual engine or engine model, but rather for each "engine family." 40 C.F.R. § 89.105. EPA defines an engine family as a group of engines "expected to have similar emission characteristics throughout their useful life periods" — a categorization based on the design and emissions characteristics of the engines. Id. § 89.116. The application for the certificate of conformity must include "[a]n unconditional statement certifying that all engines in the engine family comply with all requirements of this part [40 C.F.R. pt. 89] and the Clean Air Act." Id. § 89.115(d)(10). Those requirements include not only the emissions specifications, but also recall liability, see id. § 89.701 et seq., emissions defect reporting requirements, see id. § 89.801 et seq., and warranty obligations, see id. § 89.1007. Manufacturers are also subject to "selective enforcement auditing" — emissions testing at the assembly line or, for engines manufactured abroad, at the point of importation. See id. § 89.503.

In furtherance of this regulatory regime, EPA also requires manufacturers to affix to each new engine an "emission control information label" that identifies the engine and states that it conforms to all EPA emissions standards and regulations. Id. § 89.110, (b)(10); see also id. § 89.1003(a)(4)(ii) (prohibiting sale or delivery of engine without emission control label affixed). On a practical level, this engine label demonstrates to dealers, purchasers, and enforcement inspectors that the engine is covered by an EPA certificate of conformity. Unlabeled engines are presumed to be uncertified. See OFFICE OF REGULATORY ENFORCEMENT, U.S. ENVTL. PROT. AGENCY, ENFORCEMENT ALERT: EPA STEPS UP ENFORCEMENT OF DIESEL, GASOLINE NONROAD ENGINE IMPORTS (Vol. 3, No. 2, Feb. 2000) (Enforcement Alert).

Many nonroad engines are manufactured outside the United States. Engines covered by a certificate of conformity may be imported into the United States subject only to ordinary customs regulations. Engines not covered by a manufacturer's certificate of conformity may only be imported if they comply with EPA's Independent Commercial Importers (ICI) program. 40 C.F.R. § 89.601 et seq. The chief burden associated with the ICI program is that after the importer has obtained a certificate of conformity for the engine family, the importer still must test one of every three imported engines for compliance with Part 89 emissions regulations. According to EPA, each test costs between $15,000 and $30,000, depending on the engine. EPA Br. 9. Additionally, since it is the importer, not the manufacturer, who obtains a certificate of conformity for the engines, all other Part 89 requirements — labeling, recall and warranty, etc. — run to the importer rather than the manufacturer. See 40 C.F.R. § 89.610. The ICI importer thus steps into the shoes of the manufacturer, assuming all the obligations that would ordinarily fall upon the manufacturer.

The market for nonroad engines in the United States is segmented between original engine manufacturers (OEMs), who sell the equipment they manufacture through networks of authorized dealers, and independent equipment dealers, who are not affiliated with an OEM. Independent dealers make their way in the market by re-selling equipment, frequently at lower prices than the OEMs. The collapse of the Asia-Pacific Rim economy in the late 1990s offered a unique opportunity to enterprising independent equipment dealers. In the deeply distressed Asian construction market, equipment distributors found themselves with bloated inventories and few prospects of selling that equipment locally. Sensing an arbitrage opportunity, some U.S. independent dealers bought equipment at depressed prices in Asia, and then imported the equipment into the United States. Of course, the Asian equipment could be legally imported only if it were covered by a manufacturer's certificate of conformity or had been taken through the costly and time-consuming ICI process. Few independent dealers availed themselves of the ICI program; the lack of significant EPA enforcement of Part 89 regulations made importation of uncertified equipment a much more lucrative path.

The importation of low-priced Asian equipment — EPA-certified and otherwise — by independent dealers into the United States market had the predictable effect of undermining the pricing power of the OEMs in the United States.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Allergan, Inc. v. Sebelius
District of Columbia, 2016

Cite This Page — Counsel Stack

Bluebook (online)
372 F.3d 420, Counsel Stack Legal Research, https://law.counselstack.com/opinion/indep-equip-dlrs-v-epa-cadc-2004.