Michael J. Kelly, P.J.
In this products liability action, plaintiff appeals as of right from an order granting summary disposition for defendant-appellee, Cone-Blanchard Machine Company (hereinafter referred to as Cone-Blanchard). We reverse.
On March 24, 1994, plaintiff, an employee of defendant Seven Ranges, Inc., was engaged in operating a Conomatic feed screw machine. While she was in the process of shoveling metal shavings from the discharge bin of the machine, her hair, which was gathered on top of her head, became ensnarled in the rapidly spinning and unguarded rod being processed by the Conomatic feed screw machine. Plaintiffs hair and scalp were tom from her head.
Thereafter, plaintiff filed a complaint against Cone-Blanchard and Seven Ranges. Plaintiff alleged that Cone-Blanchard was liable as the legal successor of Cone Automatic Machine Company, Inc. (hereinafter referred to as Cone I), the company which designed and manufactured the Conomatic machine. Specifically, plaintiff claimed that Cone-Blanchard was liable for plaintiffs injuries because the feed screw machine contained no emergency shutoff button or other safety devices designed to prevent injuries like that suffered by plaintiff. In essence, plaintiff made a claim of products liability, alleging a design or manu
facturing defect. In addition, plaintiff alleged breach of warranty of fitness for intended purposes and breach of implied warranty of merchantability. Finally, plaintiff alleged that Cone-Blanchard failed to warn the users of a known or reasonably suspected danger associated with the operation of the Conomatic feed screw machine.
Cone-Blanchard filed a motion for summary disposition pursuant to MCR 2.116(C) (10), arguing that Cone-Blanchard was neither the manufacturer of the machine nor a successor corporation of the actual manufacturer, Cone I. Cone-Blanchard argued that there was no continuity of enterprise between Cone I and Cone-Blanchard that would support imposition of successor liability. Cone-Blanchard asserted that Cone I was purchased by Pneumo Dynamics Coip., and had been defunct for approximately nine years before Cone-Blanchard came into existence. Cone-Blanchard argued that because it was not the successor corporation of Pneumo Dynamics, the company that purchased Cone I, it could not be a successor of Cone I.
All the stock of Cone I was acquired by Pneumo Dynamics in 1963. Cone I then terminated its operations and was dissolved in 1963. Pneumo Dynamics formed Cone Automatic Machine Co., Inc. (hereinafter referred to as Cone n), for the sole purpose of holding the Cone name, but the coiporation was inactive, with no employees, assets, or place of business. From 1963 to 1972, Pneumo Dynamics operated Pneumo Dynamics Machine Tool Group (hereinafter referred to as pdmtg), which included assets of the dissolved Cone I, as well as assets from two other machine companies. Pdmtg continued to manufacture
the Conomatic line of machines. In 1972, Cone-Blanchard purchased the assets of pdmtg and the stock of Cone H from Pneumo Dynamics. Pneumo Dynamics continued as an active viable corporation. Thereafter, Cone-Blanchard took over the manufacture of Conomatic machines.
In response to Cone-Blanchard’s motion for summary disposition, plaintiff argued that Cone-Blanchard was in fact and law the successor of Cone I, the manufacturer of the defective machine, and therefore Cone-Blanchard was liable for plaintiff’s injuries. Plaintiff claimed that because Cone-Blanchard acquired the assets of Pneumo Dynamics, Cone-Blanchard was the successor of Pneumo Dynamics and in the chain of successorship with regard to Cone I. Plaintiff also noted that Cone-Blanchard continued to manufacture Conomatic screw machines after the purchase of Pneumo Dynamic’s assets. Plaintiff indicated that Cone-Blanchard retained the name of the manufacturing company “Cone” and continued to manufacture under the trade name of “Conomatic,” thereby evincing a continuity of enterprise. Plaintiff also contended that Cone-Blanchard was hable under the independent claim of breach of duty to warn.
The trial court determined that Cone-Blanchard was not a successor corporation of Cone I and granted Cone-Blanchard’s motion for summary disposition. Plaintiff’s subsequent motion for reconsideration was denied.
On appeal, plaintiff argues that the trial court erred in granting Cone-Blanchard summary disposition of the issue whether Cone-Blanchard was the successor corporation of Cone I for purposes of potential liabil
ity for plaintiffs injury. Plaintiff claims that a question of fact was raised regarding whether Cone-Blanchard was the successor coiporation of Cone I or Pneumo Dynamics. We agree.
A motion for summary disposition filed under MCR 2.116(C)(10) tests whether there is factual support for the plaintiffs claim. In ruling on a motion for sum-' mary disposition under MCR 2.116(C)(10), a court must consider the pleadings, affidavits, depositions, admissions, and other documentary evidence presented.
Skinner v Square D Co,
445 Mich 153, 161; 516 NW2d 475 (1994);
Michigan Mutual Ins Co v Dowell,
204 Mich App 81, 86; 514 NW2d 185 (1994). The court is not permitted to assess credibility or to determine facts.
Skinner, supra.
Giving the benefit of a reasonable doubt to the opposing party, the trial court must determine whether a record might be developed that would leave open an issue on which reasonable minds could differ. Summary disposition may be granted when there is no genuine issue of material fact and the moving party is entitled to judgment as a matter of law.
Id.
Under the traditional corporate analysis, the sale or transfer of assets by one corporation to another did not bring with it assumption of liability for the liquidated or -unliquidated debts, claims, or other liabilities of the selling corporation.
Fenton Area Public Schools v Sorensen-Gross Construction Co,
124 Mich App 631, 641; 335 NW2d 221 (1983);
Pelc v Bendix Machine Tool Corp,
111 Mich App 343, 351; 314 NW2d 614 (1981). The applicable law and limited exceptions have been summarized as follows:
‘The general rule is that, as in the instant case[:]
“ ‘[I]f one corporation purchases the assets of another and pays a fair consideration therefor, no liability for the debts of the selling corporation exists in the absence of fraud or agreement to assume the debts.
* * *
“ ‘There are certain instances, however, in which the purchaser or transferee may become liable for the obligations of the transferor corporation. The transferee may be held liable for the debts of the transferor corporation: (1) where there is an express or implied assumption of liability; (2) where the transaction amounts to a consolidation or merger; (3) where the transaction was fraudulent; (4) where some of the elements of a purchase in good faith were lacking, or where the transfer was without consideration and the creditors of the transferor were not provided for; or (5) where the transferee corporation was a mere continuation or reincarnation of the old corporation.’ ”
[Pele, supra
Free access — add to your briefcase to read the full text and ask questions with AI
Michael J. Kelly, P.J.
In this products liability action, plaintiff appeals as of right from an order granting summary disposition for defendant-appellee, Cone-Blanchard Machine Company (hereinafter referred to as Cone-Blanchard). We reverse.
On March 24, 1994, plaintiff, an employee of defendant Seven Ranges, Inc., was engaged in operating a Conomatic feed screw machine. While she was in the process of shoveling metal shavings from the discharge bin of the machine, her hair, which was gathered on top of her head, became ensnarled in the rapidly spinning and unguarded rod being processed by the Conomatic feed screw machine. Plaintiffs hair and scalp were tom from her head.
Thereafter, plaintiff filed a complaint against Cone-Blanchard and Seven Ranges. Plaintiff alleged that Cone-Blanchard was liable as the legal successor of Cone Automatic Machine Company, Inc. (hereinafter referred to as Cone I), the company which designed and manufactured the Conomatic machine. Specifically, plaintiff claimed that Cone-Blanchard was liable for plaintiffs injuries because the feed screw machine contained no emergency shutoff button or other safety devices designed to prevent injuries like that suffered by plaintiff. In essence, plaintiff made a claim of products liability, alleging a design or manu
facturing defect. In addition, plaintiff alleged breach of warranty of fitness for intended purposes and breach of implied warranty of merchantability. Finally, plaintiff alleged that Cone-Blanchard failed to warn the users of a known or reasonably suspected danger associated with the operation of the Conomatic feed screw machine.
Cone-Blanchard filed a motion for summary disposition pursuant to MCR 2.116(C) (10), arguing that Cone-Blanchard was neither the manufacturer of the machine nor a successor corporation of the actual manufacturer, Cone I. Cone-Blanchard argued that there was no continuity of enterprise between Cone I and Cone-Blanchard that would support imposition of successor liability. Cone-Blanchard asserted that Cone I was purchased by Pneumo Dynamics Coip., and had been defunct for approximately nine years before Cone-Blanchard came into existence. Cone-Blanchard argued that because it was not the successor corporation of Pneumo Dynamics, the company that purchased Cone I, it could not be a successor of Cone I.
All the stock of Cone I was acquired by Pneumo Dynamics in 1963. Cone I then terminated its operations and was dissolved in 1963. Pneumo Dynamics formed Cone Automatic Machine Co., Inc. (hereinafter referred to as Cone n), for the sole purpose of holding the Cone name, but the coiporation was inactive, with no employees, assets, or place of business. From 1963 to 1972, Pneumo Dynamics operated Pneumo Dynamics Machine Tool Group (hereinafter referred to as pdmtg), which included assets of the dissolved Cone I, as well as assets from two other machine companies. Pdmtg continued to manufacture
the Conomatic line of machines. In 1972, Cone-Blanchard purchased the assets of pdmtg and the stock of Cone H from Pneumo Dynamics. Pneumo Dynamics continued as an active viable corporation. Thereafter, Cone-Blanchard took over the manufacture of Conomatic machines.
In response to Cone-Blanchard’s motion for summary disposition, plaintiff argued that Cone-Blanchard was in fact and law the successor of Cone I, the manufacturer of the defective machine, and therefore Cone-Blanchard was liable for plaintiff’s injuries. Plaintiff claimed that because Cone-Blanchard acquired the assets of Pneumo Dynamics, Cone-Blanchard was the successor of Pneumo Dynamics and in the chain of successorship with regard to Cone I. Plaintiff also noted that Cone-Blanchard continued to manufacture Conomatic screw machines after the purchase of Pneumo Dynamic’s assets. Plaintiff indicated that Cone-Blanchard retained the name of the manufacturing company “Cone” and continued to manufacture under the trade name of “Conomatic,” thereby evincing a continuity of enterprise. Plaintiff also contended that Cone-Blanchard was hable under the independent claim of breach of duty to warn.
The trial court determined that Cone-Blanchard was not a successor corporation of Cone I and granted Cone-Blanchard’s motion for summary disposition. Plaintiff’s subsequent motion for reconsideration was denied.
On appeal, plaintiff argues that the trial court erred in granting Cone-Blanchard summary disposition of the issue whether Cone-Blanchard was the successor corporation of Cone I for purposes of potential liabil
ity for plaintiffs injury. Plaintiff claims that a question of fact was raised regarding whether Cone-Blanchard was the successor coiporation of Cone I or Pneumo Dynamics. We agree.
A motion for summary disposition filed under MCR 2.116(C)(10) tests whether there is factual support for the plaintiffs claim. In ruling on a motion for sum-' mary disposition under MCR 2.116(C)(10), a court must consider the pleadings, affidavits, depositions, admissions, and other documentary evidence presented.
Skinner v Square D Co,
445 Mich 153, 161; 516 NW2d 475 (1994);
Michigan Mutual Ins Co v Dowell,
204 Mich App 81, 86; 514 NW2d 185 (1994). The court is not permitted to assess credibility or to determine facts.
Skinner, supra.
Giving the benefit of a reasonable doubt to the opposing party, the trial court must determine whether a record might be developed that would leave open an issue on which reasonable minds could differ. Summary disposition may be granted when there is no genuine issue of material fact and the moving party is entitled to judgment as a matter of law.
Id.
Under the traditional corporate analysis, the sale or transfer of assets by one corporation to another did not bring with it assumption of liability for the liquidated or -unliquidated debts, claims, or other liabilities of the selling corporation.
Fenton Area Public Schools v Sorensen-Gross Construction Co,
124 Mich App 631, 641; 335 NW2d 221 (1983);
Pelc v Bendix Machine Tool Corp,
111 Mich App 343, 351; 314 NW2d 614 (1981). The applicable law and limited exceptions have been summarized as follows:
‘The general rule is that, as in the instant case[:]
“ ‘[I]f one corporation purchases the assets of another and pays a fair consideration therefor, no liability for the debts of the selling corporation exists in the absence of fraud or agreement to assume the debts.
* * *
“ ‘There are certain instances, however, in which the purchaser or transferee may become liable for the obligations of the transferor corporation. The transferee may be held liable for the debts of the transferor corporation: (1) where there is an express or implied assumption of liability; (2) where the transaction amounts to a consolidation or merger; (3) where the transaction was fraudulent; (4) where some of the elements of a purchase in good faith were lacking, or where the transfer was without consideration and the creditors of the transferor were not provided for; or (5) where the transferee corporation was a mere continuation or reincarnation of the old corporation.’ ”
[Pele, supra
at 351-352, quoting
Turner v Bituminous Casualty Co,
397 Mich 406, 417, n 3; 244; 244 NW2d 873 (1976). Citations omitted.]
However, the
Pele
Court noted that in
Turner, supra
at 420, the Supreme Court “rejected the narrow strictures of traditional corporate successor nonliability as inapplicable to a products liability case.”
Pele, supra
at 352. Instead, the
Turner
Court adopted the rule of “continuity of enterprise” for products liability cases that arise after corporate transfers. Under the continuity of enterprise rule, liability for a defective product may attach to a corporation that acquires the manufacturing company when the totality of the acquisition demonstrates a basic continuity of the enterprise between the manufacturer and the acquiring corporation.
Id.
The following
Turner
guidelines have been established for determining whether there is a continuity of enterprise:
“(1) There is a continuity of management, personnel, physical location, assets, and general business operations of the selling corporation;
“(2) The selling corporation ceases its ordinary business operations, liquidates, and dissolves as soon as legally and practically possible;
“(3) The purchasing corporation assumes those liabilities and obligations of the seller ordinarily necessary for the uninterrupted continuation of normal business operations to the selling corporation; and
“(4) The purchasing corporation holds itself out to the world as the effective continuation of the seller corporation.”
[Sorensen-Gross, supra
at 642, quoting
Pelc, supra
at 352-353, citing
Turner, supra.]
Applying the
Turner
guidelines to the instant case, we believe a question of fact was raised regarding whether there was a continuity of enterprise between Cone I and Cone-Blanchard. The evidence indicates that almost immediately after selling it’s assets to Pneumo Dynamics, Cone I ceased to exist. Pneumo Dynamics formed Cone H for the sole purpose of holding the Cone name, but the corporation was inactive with no employees, assets, or place of business. Pdmtg, a company owned by Pneumo Dynamics, continued to manufacture the Conomatic line of machines originally manufactured by Cone I. Subsequently, Cone-Blanchard purchased the assets of pdmtg and the stock of Cone n from Pneumo Dynamics. Thereafter, Cone-Blanchard took over the manufacture of Conomatic machines. Cone-Blanchard retained the “Cone” name, continued the general business operations of Cone I by continuing to manufacture the Conomatic screw machines, continued to manufacture the machines under the trade name of “Conomatic,” and continued to manufacture the
machines from the same location and using some of the same employees as Cone I. Under these circumstances, it could be said that Cone-Blanchard essentially held itself out to the world as the effective continuation of Cone i.
Turner, supra; Sorensen-Gross, supra.
The thrust of the cited authorities is that where a corporation reaps the benefits of the predecessor corporation it should also bear the burdens of continuity. In other words, liability should continue because the corporate body itself has essentially survived. Moreover, the public policy underlying strict products liability is to protect the injured party by placing the burden on the party most able to bear the loss by spreading the risk.
Turner, supra
at 424-425.
In sum, under the circumstances presented in this case, to say Cone I is a corporate stranger of Cone-Blanchard, and vice versa, is to honor form over substance.
Turner, supra
at 426. After giving the benefit of a reasonable doubt to plaintiff, we believe that plaintiff has established a prima facie case of continuation of corporate responsibility for products liability against Cone-Blanchard. Hence, we reverse the order granting summary disposition for Cone-Blanchard with regard to this issue and remand this matter to the trial court for further proceedings consistent with this opinion.
Independent of the claim of successor liability, plaintiff also argues that the trial court improperly dismissed plaintiffs claim that Cone-Blanchard failed to warn of the defects in the Conomatic feed screw machine. This Court in
Pele, supra
at 358, indicated as follows:
In
Powers v Baker-Perkins, Inc,
92 Mich App 645; 285 NW2d 402 (1979), Iv den 409 Mich 851 (1980), this Court adopted the position that under some circumstances there can be a cause of action based on a successor’s breach of the duty to warn. This cause of action is independent of claims based on the theory of successor liability.
Id.,
661-663;
Wilson v Fare Well Corp,
140 NJ Super 476, 491; 356 A2d 458 (1976).
Powers, supra,
662-663, would impose liability on a successor corporation for failure to warn of defects in products manufactured by its predecessor “when some control over the product is given to the successor, as in servicing, or the successor becomes aware of a defect in the product, causing an assumption of liability by the successor for injuries thereafter caused by that product.” See also
Shane v Hobam, Inc,
332 F Supp 526 (ED Pa, 1971).
Although there is no evidence to indicate that Cone-Blanchard succeeded to Cone I’s service contracts, evidence was presented to indicate that Cone-Blanchard had actual knowledge of the alleged defect in the Conomatic feed screw machines. In fact, in 1982 a strikingly similar action was instituted against Cone-Blanchard by a plaintiff who, while working on a Conomatic screw machine, suffered injuries much like those suffered by the plaintiff in the instant case.
Clearly, Cone-Blanchard was aware of the alleged defect in the machines. Moreover, it appears that Cone-Blanchard had access to the customer lists kept by Cone I. Additionally, plaintiff presented evidence that a Cone-Blanchard business card was in the possession of plaintiffs employer. Under these circumstances, where the evidence showed that Cone-Blanchard was actually aware of the alleged defect in the machine and had the means of warning customers
who purchased such machines from Cone I, the trial court erred in granting summary disposition with regard to plaintiffs claim of breach of duty to warn.
Reversed and remanded for proceedings consistent with this opinion.