Federal Insurance v. J.K. Manufacturing Co.

933 F. Supp. 2d 1065, 2013 WL 1248635, 2013 U.S. Dist. LEXIS 45007
CourtDistrict Court, N.D. Illinois
DecidedMarch 28, 2013
DocketNo. 12 C 3465
StatusPublished
Cited by3 cases

This text of 933 F. Supp. 2d 1065 (Federal Insurance v. J.K. Manufacturing Co.) is published on Counsel Stack Legal Research, covering District Court, N.D. Illinois primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Federal Insurance v. J.K. Manufacturing Co., 933 F. Supp. 2d 1065, 2013 WL 1248635, 2013 U.S. Dist. LEXIS 45007 (N.D. Ill. 2013).

Opinion

MEMORANDUM OPINION AND ORDER

RUBEN CASTILLO, District Judge.

Federal Insurance Company (“Federal Insurance”), as subrogee of MonoSol Hold-co, LLC (“MonoSol”), brings this diversity action against J.K. Manufacturing Company (“J.K.”) for negligence (Count I), breach of express and implied warranties (Count II), and products liability (Count III). (R. 1, Compl. ¶¶ 15-31.) Presently before the Court is J.K’s motion to , dismiss pursuant to Federal Rule of Civil Procedure 12(b)(6). For the reasons stated below, J.K.’s motion is denied.

RELEVANT FACTS

MonoSol is a limited liability company (“LLC”) incorporated in Delaware with its principal place of business in Merrillville, Indiana. (Id. ¶ 2.) During the time relevant to this action, MonoSol owned the property located at 1701 County Line Road, Portage, Indiana (the “MonoSol Facility”). (Id.) MonoSol manufactures plastic water soluble films inside the MonoSol Facility. (Id.) Federal Insurance is an insurance provider with its principal place of business in Warren, New Jersey. (Id. ¶ 1.) At all times relevant to this action, Federal Insurance provided property and business interruption insurance coverage to MonoSol and related MonoSol entities. (Id. ¶ 3.) J.K. is an Illinois corporation with its principal place of business in Bedford Park, Illinois. (Id. ¶ 4.) At all times relevant to this action, J.K. was in the business of designing and manufacturing cylinder drums used in production lines.' (Id.)

On or about November 6, 2009, MonoSol hired J.K. to design and manufacture four Monoflow spiral cylinder drums to replace baffled shell cylinders that were originally installed on production lines at the Mono-Sol Facility. (Id. ¶5; R. 1-1, Ex. A, Quote & Purchase Order at 2-4.) J.K. charged MonoSol $152,000.00 for the four cylinder drums. (R. 1-1, Ex. A, Quote & Purchase Order at 2-4.) The MonoSol Facility production lines each have head and tail cylinder drums. (R. 1, Compl. ¶ 6.) Head cylinder drums are used to preheat the plastic water soluble film, and tail cylinder drums are used to cool the plastic water soluble film after it comes out of the oven. (Id. ¶ 7.)

In February 2010, the MonoSol Facility’s Production Line No. 2 was upgraded with new head and tail Monoflow cylinder drums fabricated by J.K. (Id. ¶ 6.) Federal Insurance alleges that on or about May 26, 2010, Production Line No. 2 began making abnormal noises and visible cracking was noted on the tail cylinder drum. (Id. ¶ 8.) The cracking caused the tail cylinder drum to vibrate, which in turn damaged the existing production line. (Id.) J.K. repaired the tail cylinder drum, and it was returned to service on June 8, 2010. (Id. ¶ 9.) Prior to reaching full production, however, the tail cylinder drum again began making noise. (Id.) According to Federal Insurance, the cracking in the tail cylinder drum and the associated damage to the existing assembly line caused Production Line No. 2 to be out of service until June 12, 2010. (Id. ¶ 10.) That day, the tail cylinder drum was removed and replaced with the original baffled shell cylinder. (Id.) The [1068]*1068tail cylinder drum was removed by cutting Production Line No. 2’s stainless steel carrier belt. (Id.) On or about June 21, 2010, Production Line No. 2 once again began making abnormal noises and visible cracking was noted on the head cylinder drum. (Id. ¶ 11.) The cracking caused the drum to vibrate, which in turn damaged the existing production line. (Id.) According to Federal Insurance, the cracking in the head cylinder drum and the associated damage to the existing assembly line caused Production Line No. 2 to be. out of service until June 28, 2010, when the head cylinder drum was removed and replaced with the original baffled shell cylinder. (Id. ¶ 12.) The head cylinder drum was removed by cutting Production Line No. 2’s stainless steel carrier belt. (Id.)

In March 2010, the MonoSol Facility’s Production Line No. 1 was upgraded with new tail and head Monoflow cylinder drums fabricated by J.K. (Id. ¶ 6.) Federal Insurance avers that on or about September 3, 2010, Production Line No. 1 began making abnormal noises and visible cracking was noted on the tail cylinder drum. (Id. ¶ 13.) The cracking caused the tail cylinder drum to vibrate, which in turn damaged the existing production line. (Id.)

As a result of the cracking of the cylinder drums and the damage to Production Line Nos. 1 and 2, MonoSol “sustained property and business interruption damage in an amount in excess of $866,252.98 exclusive of interest and costs.” (Id. ¶¶ 14, 18, 30.) MonoSol thus made claims to Federal Insurance pursuant to its insurance policy, and Federal Insurance reimbursed MonoSol for those claims in an amount in excess of $866,252.98. (Id. ¶ 14.) Therefore, Federal Insurance avers that it is legally, equitably and contractually subrogated to the claims of MonoSol against any responsible third parties, including J.K. (Id.) Federal Insurance seeks a judgment in its favor “in an amount in excess of $866,252.98, together with interest and the cost of this action, and any other relief that this Court deems equitable and proper.” (Id. ¶¶ 18, 31.)

PROCEDURAL HISTORY

Federal Insurance filed a three-count complaint against J.K. in this Court on May 7, 2012. (R. 1, Compl.) In Count I, Federal Insurance alleges that J.K. was negligent in the design and manufacture of the Monoflow cylinder drums. (Id. ¶¶ 15-18.) In Count II, Federal Insurance asserts a claim for breach of express and implied warranties, (id. ¶¶ 19-26), and in Count III, Federal Insurance alleges that J.K. is liable under a products liability theory, (id. ¶¶ 27-31).

On August 1, 2012, J.K. filed a motion to dismiss Counts I and III of Federal Insurance’s complaint. (R. 9, Mot.) J.K. argues that the negligence and products liability causes of action should be dismissed because damages for economic losses cannot be recovered in tort pursuant to the economic loss doctrine1 set forth in Moorman Manufacturing Company v. National Tank Company, 91 Ill.2d 69, 61 Ill.Dec. 746, 435 N.E.2d 443 (1982). (R. 9, Def.’s Mem. at 2.)

On December 27, 2012, Federal Insurance filed its response to J.K’s motion, (R. 28, Pl.’s Resp.), arguing that Indiana law, and not Illinois law, governs this dispute because “the law to be applied is that of the state where the accident [or] injury occurred.” (R. 28, PL’s Resp. at 3.) (quoting Burlington N. & Santa Fe Ry. Co. v. ABC-NACO, 389 Ill.App.3d 691, 329 Ill. Dec. 238, 906 N.E.2d 83, 92 (1st Dist. [1069]*10692009)). Federal Insurance further argues that the economic loss doctrine does not bar its claims for negligence and strict products liability against J.K. because, it asserts, it may recover damages under either general negligence or products liability principles if a defective product causes damage to other property. (Id. at 4) (citing Gunkel v. Renovations, Inc., 822 N.E.2d 150, 153-54 (Ind.2005)).

Free access — add to your briefcase to read the full text and ask questions with AI

Related

In re Accutane Litig.
194 A.3d 503 (Supreme Court of New Jersey, 2018)
In re General Motors LLC Ignition Switch Litigation
257 F. Supp. 3d 372 (S.D. New York, 2017)

Cite This Page — Counsel Stack

Bluebook (online)
933 F. Supp. 2d 1065, 2013 WL 1248635, 2013 U.S. Dist. LEXIS 45007, Counsel Stack Legal Research, https://law.counselstack.com/opinion/federal-insurance-v-jk-manufacturing-co-ilnd-2013.