Equal Employment Opportunity Commission v. Outokumpu Stainless Steel USA, LLC

CourtDistrict Court, S.D. Alabama
DecidedSeptember 1, 2022
Docket1:20-cv-00521
StatusUnknown

This text of Equal Employment Opportunity Commission v. Outokumpu Stainless Steel USA, LLC (Equal Employment Opportunity Commission v. Outokumpu Stainless Steel USA, LLC) is published on Counsel Stack Legal Research, covering District Court, S.D. Alabama primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Equal Employment Opportunity Commission v. Outokumpu Stainless Steel USA, LLC, (S.D. Ala. 2022).

Opinion

IN THE UNITED STATES DISTRICT COURT FOR THE SOUTHERN DISTRICT OF ALABAMA SOUTHERN DIVISION

EQUAL EMPLOYMENT ) OPPORTUNITY COMMISSION, ) ) Plaintiff, ) ) vs. ) CIVIL ACTION NO. 20-521-CG-B ) OUTOKUMPU STAINLESS USA, ) LLC, ) ) Defendant.

MEMORANDUM OPINION AND ORDER This matter is before the court on Defendant, Outokumpu Stainless USA, LLC’s (“OTK”) motion for summary judgment (Doc. 54), Plaintiff, Equal Employment Opportunity Commission’s (“EEOC”) opposition thereto (Doc. 64), and Defendant’s reply (Doc. 66). For the reasons explained below, the Court finds that Defendants’ motion for summary judgment should be DENIED. FACTS OTK manufactures stainless steel at its Calvert, Alabama facility where it employs approximately 900 team members. (Doc. 56-5 at 2; PageID.572).1 At all relevant times, OTK has had in place an Equal Employment Opportunity policy,

1 At all times relevant to this litigation (August and September 2018), Marva Rodrigues worked in Human Resources as a Team Member Relations Representative; Thomas Hayden worked as Team Manager of LTS/CCM/SGP in the Melt Shop until late August 2018, when Stephen Pittman assumed the role; Wayne Denton worked as Director of Environmental, Health and Safety; and Michael Nations worked as Shift Coordinator in the Caster and Ladle Treatment areas. (Doc. 56-3, 56-4, 56- 5, Doc. 56-13 at 3; PageID.763, Doc. 56-17 at 3-4; PageID.831-32). 1 which prohibits any form of discrimination, including, but not limited to, disability discrimination. (Doc. 56-4; Doc. 56-5). OTK has also had in place an Americans with Disabilities Act ("ADA") policy, which provides that reasonable

accommodations will be provided to qualified individuals with disabilities. (Doc 56-5 at 14; PageID.584). Managers and Human Resources are provided training on the ADA policy, with managers understanding that any medical issues or potential requests for accommodation must be directed to Human Resources for handling. (Doc. 56-4 at 3; PageID.557; Doc. 56-5 at 3; PageID.573; Doc. 56-16 at 6; PageID.814; Doc. 56-13 at 4-5; PageID.764-64). During 2018 and 2019, OTK also had in place a Substance Abuse Policy, which, in part, required active Team

Members to report prescription medications that may interfere with their ability to safely perform their job duties. (Doc. 56-5 at 4; PageID.574; Doc. 56-7 at 16; PageID.626). Jared Burress Since 2011, Burress has worked in industrial settings. (Doc. 63-28 at 5-8; PageID.1109-12). Burress is a certified forklift driver and Senior Crane Operator

with experience using several types of cranes, plasma cutting machines, track torches, powered industrial vehicles (such as Bobcats, all terrain forklifts and material handlers), and other industrial power tools and equipment. (Doc. 63-28 at 5-8; PageID.1109-12). From 2011 to 2016, Burress worked for SSAB as an Entry Level Maintenance Operator and qualified Maintenance Operator in the metal casting department and on Quench Lines. (Id.) SSAB manufactures carbon steel. 2 (Doc. 63-33 at 68-69; PageID.1196-97). SSAB’s casting department uses a process to convert scrap metal into molten steel similar to OTK to manufacture steel and has similar work environments. (Doc. 63-35 at 7-9, 12-13; PageID.1386-881, 1391-

92). Burress' employment at SSAB was not primarily working around molten steel but he performed limited work in the casting department from time to time. (Doc. 63-32 at 28- 30; PageID. 1156-58). Burress has worked (without incident) around continuous hazards with the potential to cause serious injury or death which required him to be always alert, aware of his surroundings and able to immediately react to any hazardous situation. Doc. 63-28 at 7; PageID.1111). He has never been terminated, disciplined for any safety issue, or involved in any workplace safety

incident. (Doc. 63-28 at 7; PageID.1111). All of Burress’s employers were aware that he had a prescription for Xanax and let him work without restriction. (Id. at 8; PageID.1112). None of Burress’s employers restricted him from performing any hazardous or “safety sensitive” duties or using any tools, equipment or powered industrial vehicles. (Id.) January 2018 PPE

In January 2018, Burress applied for and received a conditional job offer at TMS, an onsite contractor at SSAB, for a position of dump truck driver. (Doc. 56-1 at 81-83; PageID. 314-16). After being extended a conditional offer with TMS, Burress underwent a pre-employment physical examination at Occupational Health Center ("OHC") with Laura Danielson, a Certified Registered Nurse Practitioner. (Doc. 56-1 at 83-86; PageID.316-19; Doc. 63-6; Doc. 63-38 at 14-17; PageID.1473-76.) 3 During the exam for TMS, Burress disclosed he took Adderall, Citalopram, and “xanex-periodically” [sic]. (Doc. 56-1 at 83-85; PageID.316-17; Doc. 63-6). Burress’ accompanying drug screen indicated Xanax was not in his system. (Doc. 63-38 at 12;

PageID.1471). OHC sent Dr. Edwards (Plaintiff’s treating physician) a form to complete on which Dr. Edwards confirmed that Burress was being treated for Anxiety, that his prognosis and/or time to recovery was indefinite, that he was to continue taking the medications as they had been prescribed, and that Burress was cleared to work with no restrictions. (Doc. 63-6 at 7; PageID.913; Doc. 63-38 at 26- 28; PageID.1485-87). The form sent to Dr. Edwards by OHC did not ask for Burress’ medical records and did not ask for any details relating to the prescription for

Xanax. (Doc. 63-6 at 7; PageID.913). Danielson has no recollection of asking Burress about his dosage, frequency, or whether he experienced actual side effects. (Doc. 63-38 at 22; PageID.1481). Danielson determined that Burress should not be cleared for “safety sensitive duties” or “operating heavy industrial equipment” at TMS. (Doc. 63-6 at 8; PageID.914). Xanax was the basis for this restriction. (Doc. 63-38 at 36-38; PageID.1495-97.) Although she knew Xanax had a possible side

effect of drowsiness, she did not know if it actually made Buress drowsy or if he took it at work. (Doc. 63-38 at 24-25; PageID.1483-84.) The Melt Shop

In 2018, OTK recruited Burress to seek employment at its steel mill. (Doc. 63-33 at 23-24; PageID.1251-52). After an interview, OTK made Burress a conditional offer of employment as an Entry Operator in the LTS/CCM/SGP 4 department, the Melt Shop, with a start date of September 4, 2018. (Doc. 63-13.) The offer was conditioned on Burress successfully completing a criminal background check and pre-employment physical exam (“PPE”). (Id.)

Within the Melt Shop, there are a number of processes related to turning steel into liquid metal. (Doc. 56-10 at 4-5; PageID.684-85; Doc. 56-4 at 3-4; PageID.557-558). Multiple processes take place at the caster; first, a ladle is used to pour liquid metal that has been heated to around 3,000 degrees into an intermediate container, then that liquid metal is poured into a mold where it is cooled and converted to slab form, then at the exit of the caster a large torch cuts the solid metal into individual slabs. (Doc. 56-4 at 3-4; PageID.557-558). An Entry

Operator in the Melt Shop is responsible for tasks such as monitoring the chemistry of the heat, making adjustments to the heat, maintenance, moving stock, and operating the caster. (Doc. 56-10 at 5-6; PageID. 685-86). An Entry Operator in the Melt Shop must work with heavy machinery (to include the caster and ladle), operate and work around powered industrial trucks (to include forklifts, bobcats, cranes, and hoists), and be able to work around hot molten steel. (Doc. 56-10 at 5-6;

PageID.685-86; Doc. 56-4 at 3; PageID.558). Within the Melt Shop, Entry Operators are regularly exposed to the following hazards: falls, pinch points, moving equipment, burns, heat, noise, and working with and around heavy equipment. (Doc. 56-4 at 4; PageID.558; Doc.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Rizzo v. Children's World Learning Centers, Inc.
84 F.3d 758 (Fifth Circuit, 1996)
Rodriguez v. Conagra Grocery Prod
436 F.3d 468 (Fifth Circuit, 2006)
Leroy Pinckney v. John E. Potter
186 F. App'x 919 (Eleventh Circuit, 2006)
Eddie J. Haynes v. City of Montgomery
344 F. App'x 519 (Eleventh Circuit, 2009)
Haynes v. Caye & Company, Inc.
52 F.3d 928 (Eleventh Circuit, 1995)
Combs v. Plantation Patterns
106 F.3d 1519 (Eleventh Circuit, 1997)
LaChance v. Duffy's Draft House, Inc.
146 F.3d 832 (Eleventh Circuit, 1998)
Gaston v. Bellingrath Gardens & Home, Inc.
167 F.3d 1361 (Eleventh Circuit, 1999)
Burton v. City of Belle Glade
178 F.3d 1175 (Eleventh Circuit, 1999)
Earl v. Mervyns, Inc.
207 F.3d 1361 (Eleventh Circuit, 2000)
P. David Bailey v. Allgas, Inc.
284 F.3d 1237 (Eleventh Circuit, 2002)
Lilly M. Ledbetter v. Goodyear Tire & Rubber
421 F.3d 1169 (Eleventh Circuit, 2005)
Holly v. Clairson Industries, L.L.C.
492 F.3d 1247 (Eleventh Circuit, 2007)
McDonnell Douglas Corp. v. Green
411 U.S. 792 (Supreme Court, 1973)
Texas Department of Community Affairs v. Burdine
450 U.S. 248 (Supreme Court, 1981)
Anderson v. Liberty Lobby, Inc.
477 U.S. 242 (Supreme Court, 1986)
McKennon v. Nashville Banner Publishing Co.
513 U.S. 352 (Supreme Court, 1995)

Cite This Page — Counsel Stack

Bluebook (online)
Equal Employment Opportunity Commission v. Outokumpu Stainless Steel USA, LLC, Counsel Stack Legal Research, https://law.counselstack.com/opinion/equal-employment-opportunity-commission-v-outokumpu-stainless-steel-usa-alsd-2022.