ALDRICH, District Judge.
This is an action for patent infringement, previously before this court in 131 F.Supp. 299, in which the defendants now move for summary judgment. Accompanying the motion are various affidavits and exhibits. The plaintiff has filed counter-documents which in some measure contradict defendants’. In order to succeed on this motion, accordingly, defendants must show that all contradictions or explanations, either already of record, or suggested by counsel during argument, are immaterial or incompetent, and that undisputed matters of record are so unambiguously plain that contradiction or explanation is not permissible and as matter of law show no possibility of recovery.
In view of the amount of material on file this is rather a large order. It has led, without deciding who is to blame, to considerable recrimination between counsel. I start with the thought that a matter calling forth so much contradiction both on the record and between counsel, not to mention requiring nearly 150 pages of briefs, is presumptively not one for summary judgment.
The plaintiff claims infringement of patent 2,468,741, for a resuscitator, applied for on December 12, 1944 and issued May 3, 1949. A resuscitator is a device which alternately fills the lungs with air or oxygen and empties them when the patient is unable to breath himself. On November 9, 1942, plaintiff applied for a patent on a resuscitator in which the face mask, the valves and the “motor” were all contained in one unit small enough to hold in the palm of the hand. All else needed was a flexible tube and a supply of gas under pressure. On December 12, 1944, this earlier application was granted as patent-2,364,626.
Prior to this time resuscitators had been heavy, cumbersome affairs in which the mechanism was too large to hold in the hand and was separate from the mask. The 626 patent’s improvements accomplished marked ease in portability, and hence in simplicity of operation and general utility.
In May 1943, more than a year before the 741 application, plaintiff sold a device embodying the subsequent 741 patent to the British Air Commission for experimentation. He did not appreciate that this constituted an “on sale.” His attorney learned the facts and realized the consequences after initiating the present suit. Since then plaintiff has filed a disclaimer of all of the claims of the 741 patent, except claim 9. He contends that claim 9 was disclosed in the 626 application — though not claimed— and hence is entitled to that earlier date and is not effected by the 1943 sale. 35 U.S.C.A. § 120.
The defendants deny that claim 9 was disclosed in the earlier application, and say that if it was, the 741 patent is void for double patenting. They assert, even more fundamentally, that their device does not infringe 741.1 This depends [270] upon consideration of the doctrine of equivalents, which defendants counter by alleging file wrapper estoppel. These two principles have additional bearing on the case, as will be subsequently developed.
The 626 patent disclosed a device having two positions, which may be called inhalation (by the patient), and exhalation. On inhalation gas under pressure entering the device passes through a nozzle into a venturi tube and draws with it air from the outside, and the combination of gas and air passes through the motor chamber and out the mask into the lungs. The air from outside entered initially into a chamber 62 and reached the venturi suction chamber through a tube 61. When the lungs are filled the pressure builds up in the motor chamber, tripping a mechanism which operates two reciprocating valves. One closes the aperture from chamber 62 to the outside and opens one between that chamber and the motor chamber. The other causes the gas, which continues to enter the device through the venturi nozzle uninterruptedly, to stop flowing into the motor chamber, and to pass instead to a now-opened exhaust valve. The combined result is that what was forced into the lungs is now drawn back, by the gas flowing through the venturi, through the mask, the motor chamber, the same chamber 62 and tube 61 into the venturi suction chamber and expelled outside. When the lungs are emptied a further drop in pressure occurs inside the motor chamber which trips the mechanism back to its original position, reversing the two reciprocal valves, producing inhalation and the whole operation is repeated.
The arrangement by which air entered from the outside to mix with the gas during inhalation was subsequently named the economy feature. Patent 741 is similar in all respects to 626 except that this feature was omitted. This simplified the device mechanically. The omission of the outside air valve eliminated chamber 62, and on exhalation the lung content passes from the motor chamber to the venturi directly through the tube, here called tube 49, instead of through chamber 62 and tube 61.
It could be found that defendants’ device was in all respects similar to patent 741 except that defendants enlarged the casing and used additional solid material (a casting), so that instead of tube 49 the passageway from the motor chamber to the exhaust venturi was a tunnel within the casing. Defendants say that this tunnel was made by drilling, and was not a tube.2 Plaintiff says that this is a distinction without a difference. I will'not say as matter of law that he is wrong. Indeed, although I understand he now says the admission was inadvertent, defendants’ counsel appeared to me to admit as much at the hearing.3 Defendants’ real contention on the tube versus other form of passageway controversy, [271] at least on this motion, must be not that it is not equivalent, but that plaintiff is barred by file wrapper estoppel from asserting that it is.
Plaintiff’s drawings submitted as part of his application for patent 741 showed tube 49, but his claim, instead of describing it as a tube, described it as “means within the casing defining a duct.” The patent office rejected this specification as “not readable.” This was, of course, technically correct. But if this was, as I hold it could be, a purely mechanical difference of no functional importance, and the rejection was not made because of any difficulty or objection of substance, such as lack of invention, infringement, or double patenting, it was a purely formal matter, and plaintiff’s amendment substituting the words “a tube” for the seven words above quoted did not raise an estoppel against thereafter asserting equivalence in a matter of substance. Reece Button-Hole Mach. Co. v. Globe Button-Hole Mach. Co., 1 Cir., 61 F. 958. Therefore it could be found that defendants infringed patent 741, unless that patent is invalid.
Free access — add to your briefcase to read the full text and ask questions with AI
ALDRICH, District Judge.
This is an action for patent infringement, previously before this court in 131 F.Supp. 299, in which the defendants now move for summary judgment. Accompanying the motion are various affidavits and exhibits. The plaintiff has filed counter-documents which in some measure contradict defendants’. In order to succeed on this motion, accordingly, defendants must show that all contradictions or explanations, either already of record, or suggested by counsel during argument, are immaterial or incompetent, and that undisputed matters of record are so unambiguously plain that contradiction or explanation is not permissible and as matter of law show no possibility of recovery.
In view of the amount of material on file this is rather a large order. It has led, without deciding who is to blame, to considerable recrimination between counsel. I start with the thought that a matter calling forth so much contradiction both on the record and between counsel, not to mention requiring nearly 150 pages of briefs, is presumptively not one for summary judgment.
The plaintiff claims infringement of patent 2,468,741, for a resuscitator, applied for on December 12, 1944 and issued May 3, 1949. A resuscitator is a device which alternately fills the lungs with air or oxygen and empties them when the patient is unable to breath himself. On November 9, 1942, plaintiff applied for a patent on a resuscitator in which the face mask, the valves and the “motor” were all contained in one unit small enough to hold in the palm of the hand. All else needed was a flexible tube and a supply of gas under pressure. On December 12, 1944, this earlier application was granted as patent-2,364,626.
Prior to this time resuscitators had been heavy, cumbersome affairs in which the mechanism was too large to hold in the hand and was separate from the mask. The 626 patent’s improvements accomplished marked ease in portability, and hence in simplicity of operation and general utility.
In May 1943, more than a year before the 741 application, plaintiff sold a device embodying the subsequent 741 patent to the British Air Commission for experimentation. He did not appreciate that this constituted an “on sale.” His attorney learned the facts and realized the consequences after initiating the present suit. Since then plaintiff has filed a disclaimer of all of the claims of the 741 patent, except claim 9. He contends that claim 9 was disclosed in the 626 application — though not claimed— and hence is entitled to that earlier date and is not effected by the 1943 sale. 35 U.S.C.A. § 120.
The defendants deny that claim 9 was disclosed in the earlier application, and say that if it was, the 741 patent is void for double patenting. They assert, even more fundamentally, that their device does not infringe 741.1 This depends [270] upon consideration of the doctrine of equivalents, which defendants counter by alleging file wrapper estoppel. These two principles have additional bearing on the case, as will be subsequently developed.
The 626 patent disclosed a device having two positions, which may be called inhalation (by the patient), and exhalation. On inhalation gas under pressure entering the device passes through a nozzle into a venturi tube and draws with it air from the outside, and the combination of gas and air passes through the motor chamber and out the mask into the lungs. The air from outside entered initially into a chamber 62 and reached the venturi suction chamber through a tube 61. When the lungs are filled the pressure builds up in the motor chamber, tripping a mechanism which operates two reciprocating valves. One closes the aperture from chamber 62 to the outside and opens one between that chamber and the motor chamber. The other causes the gas, which continues to enter the device through the venturi nozzle uninterruptedly, to stop flowing into the motor chamber, and to pass instead to a now-opened exhaust valve. The combined result is that what was forced into the lungs is now drawn back, by the gas flowing through the venturi, through the mask, the motor chamber, the same chamber 62 and tube 61 into the venturi suction chamber and expelled outside. When the lungs are emptied a further drop in pressure occurs inside the motor chamber which trips the mechanism back to its original position, reversing the two reciprocal valves, producing inhalation and the whole operation is repeated.
The arrangement by which air entered from the outside to mix with the gas during inhalation was subsequently named the economy feature. Patent 741 is similar in all respects to 626 except that this feature was omitted. This simplified the device mechanically. The omission of the outside air valve eliminated chamber 62, and on exhalation the lung content passes from the motor chamber to the venturi directly through the tube, here called tube 49, instead of through chamber 62 and tube 61.
It could be found that defendants’ device was in all respects similar to patent 741 except that defendants enlarged the casing and used additional solid material (a casting), so that instead of tube 49 the passageway from the motor chamber to the exhaust venturi was a tunnel within the casing. Defendants say that this tunnel was made by drilling, and was not a tube.2 Plaintiff says that this is a distinction without a difference. I will'not say as matter of law that he is wrong. Indeed, although I understand he now says the admission was inadvertent, defendants’ counsel appeared to me to admit as much at the hearing.3 Defendants’ real contention on the tube versus other form of passageway controversy, [271] at least on this motion, must be not that it is not equivalent, but that plaintiff is barred by file wrapper estoppel from asserting that it is.
Plaintiff’s drawings submitted as part of his application for patent 741 showed tube 49, but his claim, instead of describing it as a tube, described it as “means within the casing defining a duct.” The patent office rejected this specification as “not readable.” This was, of course, technically correct. But if this was, as I hold it could be, a purely mechanical difference of no functional importance, and the rejection was not made because of any difficulty or objection of substance, such as lack of invention, infringement, or double patenting, it was a purely formal matter, and plaintiff’s amendment substituting the words “a tube” for the seven words above quoted did not raise an estoppel against thereafter asserting equivalence in a matter of substance. Reece Button-Hole Mach. Co. v. Globe Button-Hole Mach. Co., 1 Cir., 61 F. 958. Therefore it could be found that defendants infringed patent 741, unless that patent is invalid.
This same reasoning disposes, at least for this motion, of defendants’ “other aspect” referred to in note 3, supra, namely that even if tube 49 in 741 is equivalent to defendants’ drilled passageway within the casing, tube 49 cannot be equivalent to tube 61 and chamber 62 in patent 626. Defendants point out that tube 49 is described as going directly to the motor chamber, and tube 61 goes only to 62, the outside-air valve chamber. But if a tube can be the equivalent of a passageway, then a tube plus a passageway can equal a passageway. It is true that valve chamber 62 is something more than a passageway on inhalation, but on exhalation, which is when tube 49 comes into play, the outside valve-is closed, and tube 61 plus chamber 62 lead directly, as one passage, from the motor chamber to the venturi tube just as does tube 49.
Defendants argue that even so this invention was not disclosed in 626. On the present record I am unable to determine the answer to this question. It seems to me that this inability is supported by the colloquy quoted in footnote 1, supra, and that my then reply4 is appropriate here. I will not rule as matter of law that a single device cannot include and disclose two inventions for purposes of 35 U.S.C.A. § 120, even though only one of them is claimed.
What has already been said is also sufficient to dispose of defendants’ point of double patenting.
It follows that defendants’ motion for summary judgment must be denied.