Eastern Elec. Mfg. v. Codenall Tech., No. Cv-92-0516931 S (Jan. 24, 1994)

1994 Conn. Super. Ct. 725
CourtConnecticut Superior Court
DecidedJanuary 24, 1994
DocketNo. CV-92-0516931 S
StatusUnpublished

This text of 1994 Conn. Super. Ct. 725 (Eastern Elec. Mfg. v. Codenall Tech., No. Cv-92-0516931 S (Jan. 24, 1994)) is published on Counsel Stack Legal Research, covering Connecticut Superior Court primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Eastern Elec. Mfg. v. Codenall Tech., No. Cv-92-0516931 S (Jan. 24, 1994), 1994 Conn. Super. Ct. 725 (Colo. Ct. App. 1994).

Opinion

[EDITOR'S NOTE: This case is unpublished as indicated by the issuing court.] MEMORANDUM OF DECISION ON MOTIONS FOR PREJUDGMENT REMEDIES The plaintiff, Eastern Electronics Manufacturing Corporation ("Eastern"), brought this action for breach of contract and to recover monies owed to it by the defendant Codenoll Technology Corporation ("Codenoll"), for electronic circuit boards and related components which it manufactured for Codenoll. Eastern seeks a prejudgment remedy in the amount of $527,688.38. Codenoll filed special defenses and a counterclaim against Eastern and seeks a prejudgment remedy to secure the amounts it claims are owed to it by Eastern on the counterclaim. After hearings on the cross motions for prejudgment remedies the court finds that Eastern has established probable cause to support its motion and orders that a prejudgment remedy may issue in favor of Eastern against Codenoll in the amount of $527,688.38.

The vast majority of the evidence presented at the hearing was presented by Codenoll in support of its claims for damages against Eastern. Codenoll claims to have sustained a variety of damages because of various defects in circuit boards ("FDDI boards") which were manufactured by Eastern in accordance with specifications provided by Codenoll.

Codenoll is in the business of selling computer components. It generally does not manufacture its own components, but, instead, provides the design of components to manufacturers such as Eastern, who produce the components for Codenoll to sell to its customers. CT Page 726 During the winter of 1992, Eastern and Codenoll entered into certain contracts for the sale of goods by Eastern to Codenoll. These goods included the FDDI boards, for which Codenoll provided Eastern the artwork, specifications and testing equipment. From March 27, 1992 through June 1992, Eastern delivered $527,688.38 worth of goods to Codenoll. Codenoll accepted the goods, but has failed to pay any of the foregoing amount to Eastern.

The FDDI boards were delivered to Codenoll on various dates from March 27, 1992 to June 4, 1992. When they were delivered they were subjected to a visual inspection and were subjected to functional testing during the first or second week of April, 1992. The functional testing showed that some of the boards operated more slowly than was expected. Some of the boards were sold to Codenoll customers and Codenoll received approximately $300,000 from the sale of the boards.

According to the testimony of Michael Coden, Codenoll's president, Codenoll was aware that the boards were not functioning properly by mid-April, 1992, a time when Codenoll had not yet received delivery of all the boards from Eastern, yet Codenoll did not notify Eastern of the problem at that time or at any time thereafter. Instead, Codenoll set out on a feverish quest to pinpoint the exact nature of the defects. Codenoll claims that this quest consumed the services of five engineers for hundreds, even thousands, of hours.

By the time of these hearings Codenoll had determined that the FDDI boards had the following defects: 1) the boards were put together with screws that were too large; 2) the annular ring width on 1-2% of the connections in the boards was incorrect, which could cause faulty connections; 3) excessive flux was used in soldering the boards; 4) there were certain cosmetic blemishes on the boards, which did not affect their performance; and 5) the trace and spacing widths deviated from design specifications in some parts of the boards.

An expert retained by Codenoll was able to determine the aforementioned defects in the boards after 30 hours of work. Therefore, it does not seem reasonable, or believable, that Codenoll could not detect the cause of the boards' supposed malfunctions without spending hundreds of hours in testing.

Section 42a-2-607(3) of the Connecticut General Statutes provides: CT Page 727

Where a tender has been accepted (a) the buyer must within a reasonable time after he discovers or should have discovered any breach notify the seller of breach or be barred form any remedy.

Therefore, the question of whether and/or when Codenoll notified Eastern of the breach must be answered as part of the determination of whether Codenoll has established probable cause to support its Motion for Prejudgment Remedies.

In July of 1992 after Codenoll had received invoices demanding payment for the goods it received from Eastern, it took the somewhat unusual step of sending Eastern a "debit memo". That document, dated July 16, 1992, is a preprinted form which lists the quantity and description of the FDDI boards and the amount charged by Eastern for the boards, $302,756.91. At the bottom of the form the following words appear, "We debit your account as shown." The form also contains a small box with the preprinted words, "reason for debit" and the following hand written words, "Did not pass incoming inspection."

Codenoll claims that the debit memo constituted timely notice of the claimed breach as required by 42a-2-607. The court does not agree.

Comment 4 to 42a-2-607(3) provides that "The time of notification is to be determined by applying commercial standards to a merchant buyer." In Superior Wire Paper Products Ltd. v. Talcott Tool and Machine, Inc., 184 Conn. 10, 491 A.2d 43 (1981), the plaintiff sued the defendant buyer to recover the unpaid purchase price of shipments of steel. The defendants counterclaimed seeking damages for breach of warranty. Between March 1974 and December 1974 the plaintiff sold the defendant several shipments of steel. Nine months after the initial shipment at a time when the defendant owed the plaintiff substantial amounts for the steel, the defendant notified the plaintiff for the first time that the quality of the steel was causing the defendant's customers to complain. The Court held that the defendant's notice of alleged defects was not timely made.

In Bead Chain Manufacturing Co. v. Saxton Products, Inc.,183 Conn. 266, 439 A.2d 314 (1981) the seller sued the buyer for failure to accept delivery of goods tendered pursuant to the contract of sale and for failure to pay related costs. The seller CT Page 728 had delivered installments of the finished products over a seven month period commencing in October, 1973. Until July 1974, the buyer neither rejected any of the tendered goods, nor complained about their nonconformity. Then in July 1974 when confronted with a bill, the buyer for the first time stated that the products were defective. The Supreme Court upheld the trial court's decision awarding the seller the contract price. The Court agreed that the buyer's notice of defects was not timely given.

Certain claimed defects in the FDDI boards were detectable by visual inspection. Codenoll was aware of the boards' alleged slow performance time in mid April, 1992, yet it failed to contact Eastern until July 16, 1992. The failure to notify Eastern of a problem immediately upon becoming aware of it was particularly unreasonable under the circumstances of this case. In April, 1992 Eastern had not yet delivered all the boards. A prompt notice of defect might have permitted Eastern to correct the defects or to stop further shipments of the boards.

Codenoll correctly argues that the notice of defect required under 42a-2-607(3) is less detailed than that required upon rejection of goods.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Bead Chain Manufacturing Co. v. Saxton Products, Inc.
439 A.2d 314 (Supreme Court of Connecticut, 1981)
Superior Wire & Paper Products, Ltd. v. Talcott Tool & Machine, Inc.
441 A.2d 43 (Supreme Court of Connecticut, 1981)
Luciani v. Stop & Shop Companies, Inc.
544 A.2d 1238 (Connecticut Appellate Court, 1988)

Cite This Page — Counsel Stack

Bluebook (online)
1994 Conn. Super. Ct. 725, Counsel Stack Legal Research, https://law.counselstack.com/opinion/eastern-elec-mfg-v-codenall-tech-no-cv-92-0516931-s-jan-24-1994-connsuperct-1994.