E. Edelman & Co. v. Queen Stove Works, Inc.

284 N.W. 838, 205 Minn. 7, 1939 Minn. LEXIS 716
CourtSupreme Court of Minnesota
DecidedMarch 24, 1939
DocketNo. 31,907.
StatusPublished
Cited by15 cases

This text of 284 N.W. 838 (E. Edelman & Co. v. Queen Stove Works, Inc.) is published on Counsel Stack Legal Research, covering Supreme Court of Minnesota primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
E. Edelman & Co. v. Queen Stove Works, Inc., 284 N.W. 838, 205 Minn. 7, 1939 Minn. LEXIS 716 (Mich. 1939).

Opinion

Gallagher, Chief Justice.

Appeal from an order denying defendant’s motion for a new trial.

E. Edelman & Company, plaintiff, whose principal place of business is in Chicago, is a manufacturer of testing equipment and automotive replacement parts. The manufacture of rebuilt generators is incidental to its business. Queen Stove Works, Inc., defendant, whose principal place of business is in Albert Lea, manufactures oil-heating apparatus and gasoline pressure stoves. In 1935 it considered adding to its line the manufacture of windchargers, battery-charging units similar in appearance to a small windmill. *9 It planned to make in its factory all the parts of the windcharger except the generator, the wiring, and the meter for the instrument board.

Having been informed that plaintiff was furnishing generators for a competitor, defendant communicated with plaintiff by letter and later Mr. Trow, defendant’s president, and Mr. Murphy, a salesman for a radio company, journeyed to Chicago, where they interviewed plaintiff’s sales manager, Mr. Wray, and some of its technical experts. What was said at this conference has considerable bearing on the issues here involved. We quote from the testimony of Mr. Wray:

Q. “Did you have any further talk with Mr. Trow as to how these generators were to be made, that you discussed there -while at your office?
A. “In detail at the time he was there, up to the point — and the specifications written, and up to the point that he says that as soon as he got back to the factory, he probably would want some samples, and would be in a position to place an order. That is the notations while he was at my desk, that I made on his first visit; that he wanted the generator to cut in at 4 to 500 revolutions per minute, and he asked me to make those notations so there would be no misunderstanding when his order came in, and the generators were to charge at least 8 to 10 amperes at 1,000 revolutions per minute.
Q. “That was a part of your talk at your office?
A. “Yes, sir, and I made the notations that when his order came, instead of putting down all the details, they would be made from these notations. The armatures — the generators we had previously made for the Dunn Manufacturing Company — contained, or had assembled into them these cutout screws, two screws on top of the •shell, that another piece was fastened to the generator with. He said there was no use — we didn’t need those screws. We furnished the Dunn Manufacturing Company a generator that had a gear ■on the end of the shaft. He said I have no use for that gear; don’t put it on there; that notation was made. We made an improve» *10 ment for him over the generator made for Dunn, in that we placed a felt retainer or washer inside of one end of the generator. The reason for that was that when he advised me that the generator tipped up in the air it was liable to have water come down into the generator, and this was an improvement for which he paid, placing this felt retainer or washer on the inside of the generator. * * *
• Q. “Who suggested those improvements?
A. “That I don’t remember, except in the conversation between us, he wanted an improvement, and when that tipped up in the air, as I remember his device that he was to use this on, he tried to explain it to me, that when it obtained a certain speed, the generator would tip, and stand up on end, and he was afraid the water would run down in there. Well, any mechanic would figure out some way to keep that water from running in there, and we decided to use a felt washer saturated with oil, that would keep the water from running down in the generator when it was tipped up.”

Mr. Trow testified:

Q. “And tell us your conversation fully with Mr. Wray that day.
A. “We started back at the beginning of our experience in the windcharger business, and led up to what had happened in connection with the Zenith charger, and told him that we understood that he was selling a remade, or reconditioned Ford generator to the Dunn Company at Clarinda, and asked him if it would be possible for us to buy that same generator, and he said yes, and we explained to him that we didn’t know much about making wind-chargers, and knew less about generators, and asked a lot of questions as to what he thought we should have in the way of a generator for this windcharger of ours, that would do a satisfactory job, insofar as charging a farm radio battery is concerned. He wanted to know if we had a picture of our charger, and we showed him these three photographs we have shown here, and explained how the charger operated, and naturally, he was interested in the governor, and we explained that to him, and he wanted to know all about the propeller, because that was something new he had not seen before, and he told us that he was furnishing those generators to *11 Dunn, as I remember it, at $2.80 and he says, we can furnish you the same generator at the same price. He says, as far as I know, it is doing a satisfactory job for them, and I am sure it will do a satisfactory job for you. I do remember there was one point that came up, and that was that due to the fact that our propeller tips up when it is pulled out of operating position, he suggested it would be a good idea for me to put this felt washer which he spoke of, in the head of the generator, so as to prevent any moisture from getting in when the generator was tipped'up in that position and not operating, but when the generator was operating, and was turning so fast, there was no danger of any water getting in there to cause any trouble. He took us out, I remember, into the plant, and . he showed us a stock of these Ford generators — I don’t know how many but there were a large number of them that they had stacked up in different bins, to show us he had a big stock of generators he was furnishing Dunn, and could furnish to us, so we didn’t have to worry — he could take care of all the business we could turn over to him, and then he took us over to a bench and called some man over there to show us just how they would test every one of these generators, so we could absolutely depend on them, and every generator would do what he told us- it should do in order to do a satisfactory job of charging, so I — on the strength of what he told us, we went back in the office, and talked over more details, and on the strength of what he told us we says, all right, we would give him the business, and when I get home, I will mail him an order.
Q. “Had you at that time ever seen a Dunn charger ?
A. “No, sir.
Q. “Didn’t you know what they looked like?
A. “No, sir.
Q. “Have you ever seen a picture of one?
A. “Not that I can remember of.
Q. “Do you know how many amps it was necessary to charge in order to properly charge a battery? . .
A. “Mr. Wray told us if we. could furnish — if the generator *12

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Winter v. Skoglund
404 N.W.2d 786 (Supreme Court of Minnesota, 1987)
National Farmers Union Property & Casualty Co. v. Anderson
372 N.W.2d 71 (Court of Appeals of Minnesota, 1985)
NAT. FARMERS UNION PROP. & CAS. v. Anderson
372 N.W.2d 71 (Court of Appeals of Minnesota, 1985)
Atcas v. Credit Clearing Corporation of America
197 N.W.2d 448 (Supreme Court of Minnesota, 1972)
Riviera Imports, Inc. v. Anderson Used Cars, Inc.
128 N.W.2d 159 (Supreme Court of Minnesota, 1964)
Kaufman v. Katz
97 N.W.2d 56 (Michigan Supreme Court, 1959)
Luther v. Standard Conveyor Co.
89 N.W.2d 179 (Supreme Court of Minnesota, 1958)
Inland Products Corp. v. Donovan Inc.
62 N.W.2d 211 (Supreme Court of Minnesota, 1953)
Henry Simons Lumber Co. v. Simons
44 N.W.2d 726 (Supreme Court of Minnesota, 1950)
Juvland v. Wood Brothers Thresher Co.
3 N.W.2d 772 (Supreme Court of Minnesota, 1942)
United States Gypsum Co. v. Birdsboro Steel Foundry & Machine Co.
45 Pa. D. & C. 259 (Philadelphia County Court of Common Pleas, 1942)
Kavli v. Leifman
292 N.W. 210 (Supreme Court of Minnesota, 1940)
O'Keefe v. Routledge
103 P.2d 307 (Montana Supreme Court, 1940)
In Re Estate of Herman Beier
284 N.W. 833 (Supreme Court of Minnesota, 1939)

Cite This Page — Counsel Stack

Bluebook (online)
284 N.W. 838, 205 Minn. 7, 1939 Minn. LEXIS 716, Counsel Stack Legal Research, https://law.counselstack.com/opinion/e-edelman-co-v-queen-stove-works-inc-minn-1939.