Dollison v. Chicago, Rock Island & Pacific Railroad

355 N.E.2d 588, 42 Ill. App. 3d 267, 1976 Ill. App. LEXIS 3116
CourtAppellate Court of Illinois
DecidedSeptember 7, 1976
Docket60175
StatusPublished
Cited by17 cases

This text of 355 N.E.2d 588 (Dollison v. Chicago, Rock Island & Pacific Railroad) is published on Counsel Stack Legal Research, covering Appellate Court of Illinois primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Dollison v. Chicago, Rock Island & Pacific Railroad, 355 N.E.2d 588, 42 Ill. App. 3d 267, 1976 Ill. App. LEXIS 3116 (Ill. Ct. App. 1976).

Opinion

Mr. JUSTICE BURKE

delivered the opinion of the court:

Stanley Dollison brought an action based upon negligence and product liability against The Chicago, Rock Island & Pacific Railroad Company (“Rock Island”), the Penn-Central Railroad, and Unarco Industries, Inc. Dollison, a janitor for the Campbell Soup Company, suffered injuries when he was struck by a 700-pound steel load divider door which fell from its attachment located beneath the ceiling of a railroad boxcar. The Rock Island is the owner of the boxcar; Unarco is the manufacturer of the door; and the Penn-Central is the servicing railroad for the Campbell Soup loading docks in Chicago. After a lengthy trial, the jury returned a verdict of $75,000 for the plaintiff against the Rock Island. Defendants Unarco and Penn-Central received favorable verdicts. The trial court denied Rock Island’s post-trial motion, and this appeal followed.

The Rock Island contends that: (1) the trial court erred in denying its motions for a directed verdict and for judgment notwithstanding the verdict; and (2) the verdict is against the manifest weight of the evidence. The Rock Island does not contend that the award of damages is excessive; that proximate cause is lacking; that plaintiff is guilty of contributory negligence; or that any tendered jury instruction or evidentiary ruling is erroneous. We shall review the evidence pertinent to Rock Island’s appeal.

Leroy Bertram, the plaintiffs first witness, testified under section 60 of the Illinois Civil Practice Act. (Ill. Rev. Stat. 1973, ch. 110, par. 60.) Bertram has been employed by Unarco since 1967 and is currently vice-president of engineering of Unarco’s Equipco Division. Prior to his employment by Unarco, Bertram was employed for several years by the Pennsylvania Railroad Company. Bertram is extensively experienced and schooled in mechanical engineering work relating to the design, construction, and maintenance of railroad freight cars. During his employment with the Equipco Division of Unarco, Bertram’s duties related to the workings of load divider doors. With the use of photographs and diagrams, Bertram explained the operation and construction of the type of load divider door which fell upon the plaintiff.

A load divider system in a railroad boxcar consists of four rectangular steel doors each of which is approximately 8 to 9 feet tall, extends from floor to ceiling, and weighs approximately 700 pounds. Both upper corners of each of the four doors roll along tracks placed on the sides and in the middle of the car’s ceiling. When a particular door is unlocked, it may be pushed or pulled along its tracks for the purpose of stabilizing or compartmentalizing the car’s load. The length of each side of the boxcar’s interior may be compartmentalized by two of the four load divider doors.

In the center portion of each door is an operating handle which is a lever device capable of being pulled out and down from an upright, recessed position. When the handle is in an upright position, the door is locked by spring-loaded pins which secure tightly to metal track located on the floor and ceiling of the car. Once the handle is pulled downward, the lock pins recess into the body of the door, enabling the door to be rolled along the ceiling tracks. When the door is unlocked, the only mechanism which supports the weight of the door in a standing position is an overhead carriage connection. The focus of this lawsuit is on the installation of the overhead carriage connection.

Above each door is a carriage body which has wheels at either end to guide the door along its ceiling tracks. The carriage body is affixed to the door itself by means of a connecting pin which is bolted to casting welded to the top portion of the door. The bolt which holds the connecting pin from the overhead carriage body to the door casting is called the pivot bolt. The pivot bolt is approximately 5 to 6 inches long and % inch in diameter. If the pivot bolt is securely assembled in place, the door will remain suspended from the carriage connection when unlocked. If the pivot bolt is missing, the door will fall from the carriage connection when unlocked. However, the spring-loaded lock pins will hold the door in an upright position if the pivot bolt is missing from the carriage connection.

The pivot bolt is properly assembled by being threaded through a washer, through one end of the door’s casting, through the connecting pin from the carriage body, and out the other end of the door’s casting. An adjustment washer followed by a lock washer, hex nut, and flat washer are placed in sequence on the bolt. A cotter pin is inserted in a hole at the end of the pivot bolt.

Bertram testified that the lock washer operates as a safety device to prevent the hex nut from loosening under the vibration caused by normal movement of the boxcar. When the hex nut is tightened against the lock washer, a “biting action” results which prevents the hex nut from loosening. In the event the hex nut vibrates loose, the cotter pin operates as a fail-safe device to prevent the hex nut from falling off the pivot bolt. The flat washer, located between the hex nut and the cotter pin, guards against wear on the cotter pin. A flat washer would not function as a lock washer and a lock washer would not function as a flat washer. If the flat washer were inserted inside the hex nut on the bolt assembly, the hex nut would not be held in place by compression. Conversely, if the lock washer were inserted on the outside of the nut on the bolt assembly, the lock washer could wear away the cotter pin rather than protect against the pin’s destruction. If the cotter pin is missing from the assembly, the pivot bolt will become dislodged from the carriage connection causing the divider door to fall.

Bertram testified that on November 21, 1967, he met with representatives from Campbell Soup, the Rock Island, and the Penn-Central to inspect Rock Island Car 6407, the car in which plaintiff was injured. With the use of a ladder, Bertram examined all four carriage connections inside the car. Bertram discovered an improper sequence on the pivot bolt assembly in the carriage connections of the three doors remaining in a locked, standing position. The flat washer was found on the inside of the hex nut, where the lock washer properly belonged, and the lock washer was found on the outside of the nut, where the flat washer properly belonged. Bertram further noticed that the cotter pins were missing from two of the three bolt assemblies of the standing doors. Bertram was unable to find any of the missing cotter pins on the floor of the car.

Chester Berkley, the area manager at the Campbell Soup warehouse, testified that nothing inside car 6407 had been moved after Dollison was injured. Introduced into evidence were photographs of the car’s interior which were taken by Berkley immediately after the accident. Berkley stated that testing each load divider door for moveability was one of Dollison’s duties in preparing a boxcar for loading. However, Dollison was never instructed to inspect each door’s carriage connection by use of a ladder. If one of Campbell’s dock foremen determined that a particular boxcar was damaged or unfit for loading, the car would be switched out of the loading docks as a “bad order.” The servicing railroad, the Penn-Central, would return the car to the railroad which owned the car.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Kalmin v. Varan
2021 IL App (1st) 200755 (Appellate Court of Illinois, 2021)
McCall v. Chicago Board of Education
593 N.E.2d 621 (Appellate Court of Illinois, 1992)
Kane v. NW. SPEC. RECREATION ASS'N
508 N.E.2d 257 (Appellate Court of Illinois, 1987)
Kane v. Northwest Special Recreation Ass'n
508 N.E.2d 257 (Appellate Court of Illinois, 1987)
Massa v. Department of Registration & Education
507 N.E.2d 814 (Illinois Supreme Court, 1987)
In Re Marriage of Leff
499 N.E.2d 1042 (Appellate Court of Illinois, 1986)
Lee v. Grand Trunk Western Railroad
492 N.E.2d 1364 (Appellate Court of Illinois, 1986)
Zack Co. v. Sims
438 N.E.2d 663 (Appellate Court of Illinois, 1982)
Moorman Manufacturing Co. v. National Tank Co.
414 N.E.2d 1302 (Appellate Court of Illinois, 1980)
Bethune Plaza, Inc. v. Department of Public Aid
414 N.E.2d 183 (Appellate Court of Illinois, 1980)
Fuery v. Rego Co.
390 N.E.2d 97 (Appellate Court of Illinois, 1979)
Wilkey v. Illinois Racing Board
381 N.E.2d 1380 (Appellate Court of Illinois, 1978)
Berlinger's, Inc. v. Beef's Finest, Inc.
372 N.E.2d 1043 (Appellate Court of Illinois, 1978)
Bise's Supermarket, Inc. v. Valley Forge Insurance
363 N.E.2d 186 (Appellate Court of Illinois, 1977)

Cite This Page — Counsel Stack

Bluebook (online)
355 N.E.2d 588, 42 Ill. App. 3d 267, 1976 Ill. App. LEXIS 3116, Counsel Stack Legal Research, https://law.counselstack.com/opinion/dollison-v-chicago-rock-island-pacific-railroad-illappct-1976.