Century Electric Co. v. Detroit Copper & Brass Rolling Mills

264 F. 49, 1920 U.S. App. LEXIS 1225
CourtCourt of Appeals for the Eighth Circuit
DecidedMarch 9, 1920
DocketNo. 5323
StatusPublished
Cited by5 cases

This text of 264 F. 49 (Century Electric Co. v. Detroit Copper & Brass Rolling Mills) is published on Counsel Stack Legal Research, covering Court of Appeals for the Eighth Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Century Electric Co. v. Detroit Copper & Brass Rolling Mills, 264 F. 49, 1920 U.S. App. LEXIS 1225 (8th Cir. 1920).

Opinion

SANBORN, Circuit Judge.

This is an action by the vendee in a written contract of, sale, at prices therein stated, of 400,000 pounds of brass rods, of sizes and other qualities therein specified, to recover back the purchase price, $8,506.03, of 27,504 pounds thereof, which the vendee returned, because, as it claims, they were too hard to be cut and made into brass primers by automatic screw machines. The vendor defended on the ground that it was under no obligation to make the rods of such a degree of hardness that they could be so machined. The written agreement contained no covenant of that nature. The vendee offered to prove that in the negotiations for the contract, just before it was made, the vendor made a parol agreement to that effect. The court ruled out this evidence, because it varied the written contract, by adding a new covenant to it. The vendee contended that there was an implied warranty to that effect, but the court held otherwise, and directed a verdict for the vendor. These rulings are assigned as error.

The written contract provides that the Detroit Copper & Brass Rolling Mills, a corporation, sells, and the Century Electric Company, a corporation, buys, “the following described material. Deliveries, prices, terms and conditions, all as hereinafter set forth.” Then follows a clear description of the brass rods, their shapes, dimensions, and sizes, a statement of their ingredients, in these words, “The basis for the mixture to consist of sixty (60) parts copper; and forty (40) parts spelter,” a statement of their amount, of the times, place, and manner of their delivery, of the price to be paid for them, and of the times and manner of the payments. After all these and other provisions not material in this case, just preceding the final sentence, which relates to the signatures to the agreement, this covenant appears :

“There are no understandings nor agreements relative to this contract that are not expressed herein, and no changes shall be made in this contract, unless reduced to writing and signed by both parties.”

This sale was solicited by the Century Electric Company, the ven-dee, which had a contract with the Bethlehem Steel Company to furnish Russian brass primers for 3-inch shells. The Century Company asked the Rolling Mills to-state what it would sell it the brass rods [51]*51described in the contract for. The answer was a statement of their prices, followed by a personal interview of four hours between the agents of the corporations, and the execution of the contract immediately upon the close of that conference.

The vendee, to sustain its claim that the vendor made an oral agreement and an implied contract to sell it brass rods soft enough to be readily cut and made into brass primers by the use of automatic screw machines, offered evidence tending to> prove, that the customary method of cutting and making brass rods into primers was 'by the use of automatic screw machines; that the vendor knew that fact, and the further fact that the Century Company was buying the rods for the purpose of manufacturing them into primers to fill its contract with the Bethlehem Steel Company; that in the parol negotiations, which resulted in the written contract, Mr. Hoffman, who signed the contract for the vendor, said “that rods manufactured by his concern could be machined readily, that he had sold brass for the manufacture of brass primers to another concern, which had bought brass from other brass companies and found it defective, and finally had to come to his company to get the proper kind of brass”; and that thereupon the written contract was finally signed. There was other evidence in this case, but none that presents the questions of law at issue here more favorably for the vendor than that which has been recited, and the fact that the vendee’s witnesses offered to testify that, while all the 400,000 pounds of brass rods which the vendor delivered, except this 27,504 pounds, were readily machined, this remnant was not thus machinable.

[1, 2] The written contract clearly describes the ingredients, 60 parts copper and 40 parts spelter, of the mixture from which the brass rods were to be produced, the size and shape of the rods, and the vendor made and delivered rods which filled the requirements of the writing. When the parties were negotiating for the contract, the vendee might have required, and, if the vendor had consented, might have obtained, a provision in the written agreement that the vendor would sell and deliver brass rods that could be readily cut and made into Russian primers by the use of automatic screw machines, but it did not do so. When these parties selected, out of the numerous suggestions discussed during the four hours of conference, which the agent of the vendee testified immediately preceded, the signing of the contract, the terms to which they agreed and embodied them in their written contract, the legal presumption arose that they had rejected, and did not agree or intend to agree to, the suggestions discussed in the negotiations which were omitted from the writing, and where, as in this case, the written contract imports a complete legal obligation free from uncertainty and ambiguity, that presumption is conclusive. The rule that all previous negotiations are merged in the written agreement, and that parol evidence to modify it is incompetent, rests upon the conclusive presumption that the parties have written into it every material term and item of their agreement, and evidence of a contemporaneous parol contract is as incompetent to add another covenant or term to the writing as it is to change a covenant or to withdraw it [52]*52therefrom. The evidence to the effect that in the negotiations immediately prior to the contract the vendor orally agreed to sell brass rods of such a degree of hardness that they could be readily cut and made into Russian primers by the use -of automatic screw machines was incompetent and there was no error in its rejection. Seitz v. Brewers’ Refrigerating Machine Co., 141 U. S. 510, 517, 12 Sup. Ct. 46, 35 L. Ed. 837; Martin v. Cole, 104 U. S. 34, 39, 26 L. Ed. 647; Thompson v. Eibby, 34 Minn. 374, 377, 26 N. W. 1; Union Selling Co. v. Jones, 128 Fed. 672, 674, 63 C. C. A. 224, 226; Connecticut Fire Ins. Co. v. Buchanan, 141 Fed. 877, 897, 73 C. C. A. Ill, 131, 4 L. R. A. (N. S.) 758; Omaha Cooperage Co. v. Armour, 170 Fed. 292, 297, 95 C. C. A. 488, 493.

[3] Counsel, however,, maintain that, out of the rejected testimony that the vendor, before it made the contract, knew the custom of cutting and making the rods into Russian primers by the use of automatic screw machines, that the vendee was buying the rods to be eventually made into primers, that the vendor represented that it could produce the goods to make such primers, that the rods made by it could be machined readily, that it had sold brass rods for this purpose to another concern, which had bought brass rods from another brass company, which were defective, and had finally come to it to get the proper kind of brass, there arose an implied warranty that the brass it sold to the Century Company would be of such a degree of hardness that the rods could be readily machined.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Price Brothers Lithographic Co. v. American Pack. Co.
381 S.W.2d 830 (Supreme Court of Missouri, 1964)
Interstate Folding Box Co. v. Hodge Chile Co.
334 S.W.2d 408 (Missouri Court of Appeals, 1960)
Ford Motor Co. v. Cullum
96 F.2d 1 (Fifth Circuit, 1938)
Geddes v. Reeves Coal & Dock Co.
20 F.2d 48 (Eighth Circuit, 1927)
White, Ward & Erwin v. Hager
248 S.W. 319 (Texas Supreme Court, 1923)

Cite This Page — Counsel Stack

Bluebook (online)
264 F. 49, 1920 U.S. App. LEXIS 1225, Counsel Stack Legal Research, https://law.counselstack.com/opinion/century-electric-co-v-detroit-copper-brass-rolling-mills-ca8-1920.