Bright Wood Corp. v. Bankers Standard Insurance Co.

665 N.W.2d 544, 2003 Minn. App. LEXIS 875, 2003 WL 21694439
CourtCourt of Appeals of Minnesota
DecidedJuly 22, 2003
DocketC5-02-2075
StatusPublished
Cited by6 cases

This text of 665 N.W.2d 544 (Bright Wood Corp. v. Bankers Standard Insurance Co.) is published on Counsel Stack Legal Research, covering Court of Appeals of Minnesota primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Bright Wood Corp. v. Bankers Standard Insurance Co., 665 N.W.2d 544, 2003 Minn. App. LEXIS 875, 2003 WL 21694439 (Mich. Ct. App. 2003).

Opinion

*546 OPINION

FORSBERG, Judge. *

In this declaratory judgment action, appellant insured, Bright Wood Corporation, challenges the grant of summary judgment to respondent insurers, Bankers Standard Insurance Company and California Insurance Company. Respondents denied coverage for damages incurred when wood window sash components supplied by appellant Bright Wood failed to meet contract specifications, forcing its customer, Scherer Brothers Lumber Company, to remove and replace all window sashes suspected of containing the defective components. Bright Wood contends that summary judgment was inappropriately granted because genuine issues of material fact remain concerning whether property other than its product was damaged or rendered useless. We disagree and affirm.

FACTS

Bright Wood Corporation manufactures wood sash components for windows. Scherer Brothers Lumber Company manufactures windows using components provided from various suppliers. In 1996, Scherer entered into a contract with Bright Wood through JJJ Specialty Company, a budding materials representative, to supply the wood components that surround the glass in a window sash. In its contract with Bright Wood, Scherer specified that the wood sash components had to be treated with a wood preservative to prevent rot. From October 1996 to November 1997, Bright Wood failed to treat the sash components sold to Scherer. While reviewing milling records in late 1997, a Bright Wood employee discovered that the components had not been treated; Bright Wood did not inform either Scherer or its insurers about the problem, but began to treat the components with a preservative. Unaware of the problem, Scherer continued to use both treated and untreated components, installing them in between 50,000 and 90,000 sash units.

In late 1997, Scherer received at least two service requests for windows with problems with discoloration and stripped hardware. In 1998, while inspecting for hail damage after a bad storm, Scherer noticed a number of windows with discolored sash components and began to receive numerous complaints about discolored or deteriorating windows. Scherer notified Bright Wood that there appeared to be a problem with Bright Wood’s preservative process. On December 1, 1999, Bright Wood’s CEO, Dallas Stovall, met with representatives of Scherer and JJJ, the building materials representatives, to discuss the increasing problem of rotting windows. Stovall did not disclose the failure to treat the wood, but on December 3 notified Bright Wood’s insurance agent of a potential liability. On January 14, 2000, Stovall wrote to JJJ stating that a review of Bright Wood’s records indicated that from October 1996 through November 1997, it failed to treat the wood sash components supplied to Scherer with preservatives.

Scherer embarked on a repair program. Initially, Scherer responded to complaints and replaced visibly defective parts during field visits. It found that it could not reliably determine which sash units would rot and began on-site replacement of all wood sash components manufactured in 1996 and 1997. During these repairs, the windows showed no other damage or dete *547 rioration except to the Bright Wood components. However, in order to replace the wood sash components, Scherer technicians necessarily had to remove weather stripping, hardware, and aluminum cladding. The windows also had to be refinished.

As the scope of the problem grew, Scherer decided it was more efficient to replace the entire window with a newly manufactured window; although material costs were somewhat higher, labor costs were lower. This again meant that window finishes had to be redone to match. In all the inspections and replacements, no defect or damage was noted in any part of the windows except to the wood sash components provided by Bright Wood. The only damage to non-Bright Wood components occurred during the repair process.

Scherer sued Bright Wood for breach of contract and warranties. The two companies settled for $8.2 million in December 2001. In February 2001, Bright Wood brought this declaratory judgment action, after respondents Bankers Standard Insurance Company and California Insurance Company both denied coverage. California provided comprehensive general liability coverage for Bright Wood from January 1, 1995 to January 1, 1998. Bankers provided comprehensive general liability coverage beginning January 1, 1998. California moved for summary judgment, asserting that because Scherer did not start receiving complaints until 1998, any occurrence, as defined in its policy, happened after its policy period ended on January 1, 1998. On August 14, 2002, the district court denied California’s summary judgment motion, stating that issues of fact remained as to whether California had notice of claims made during its policy period.

Both Bankers and California moved for summary judgment based on various policy exclusions. Both policies contain an exclusion for property damage to the insured’s product “arising out of it or any part of it.” Both policies also contain a so-called “sistership” exclusion, excluding coverage for

[djamages claimed for any loss, cost or expense incurred by you or others for the loss of use, withdrawal, recall, inspection, repair, replacement, adjustment, removal or disposal of:
(1) “Your product”;
[[Image here]]
(3) “Impaired property”;
if such product * * * or property is withdrawn or recalled from the market or from use by any person or organization because of a known or suspected defect, deficiency, inadequacy or dangerous condition in it.

“Impaired property” is defined in both policies as

tangible property, other than “your product” * * * that cannot be used or is less useful because:
a. It incorporates “your product” * * * that is known or thought to be defective, deficient, inadequate or dangerous; or
b. You have failed to fulfill the terms of a contract or agreement;
if such property can be restored to use by:
a. The repair, replacement, adjustment or removal of “your product”
⅜ ⅜ ⅜ * QJI
b. Your fulfilling the terms of the contract or agreement.

Bright Wood argued that because the repair and replacement process damaged non-Bright Wood components, neither exclusion applied. Bright Wood produced evidence showing that the cost of replacing weather stripping and aluminum cladding *548 and providing new finishes, formed a significant part of the cost of repair or replacement.

On September 27, 2002, the district court granted summary judgment to California and Bankers, concluding that the policies were unambiguous and, based on the sistership exclusion, clearly excluded the property damage to the wood sash components, as the insured’s product, and any other damage to the sash, including replacement costs. Bright Wood appeals.

ISSUES

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Florists' Mutual Insurance v. Wagners Greenhouses, Inc.
535 F. Supp. 2d 947 (D. Minnesota, 2008)
Corn Plus Cooperative v. Continental Casualty Co.
444 F. Supp. 2d 981 (D. Minnesota, 2006)
Medmarc Casualty Insurance v. Angeion Corp.
419 F. Supp. 2d 1112 (D. Minnesota, 2006)

Cite This Page — Counsel Stack

Bluebook (online)
665 N.W.2d 544, 2003 Minn. App. LEXIS 875, 2003 WL 21694439, Counsel Stack Legal Research, https://law.counselstack.com/opinion/bright-wood-corp-v-bankers-standard-insurance-co-minnctapp-2003.