BNSF Railway v. FRA
Opinion
United States Court of Appeals for the Fifth Circuit United States Court of Appeals Fifth Circuit
FILED
March 15, 2023
No. 22-60217 Lyle W. Cayce Clerk
BNSF Railway Company,
Petitioner,
versus
Federal Railroad Administration; Amit Bose, in his official capacity as Administrator, Federal Railroad Administration; United States Department of Transportation,
Respondents.
Petition for Review of an Order of the Federal Railroad Administration Agency No. 2020-64
Before Jones, Smith, and Graves, Circuit Judges. Jerry E. Smith, Circuit Judge:
BNSF Railway Co. (“BNSF”) petitions for review, contending that the refusal of the Federal Railroad Administration (“FRA”) to grant a waiver of standard track-inspection regulations so that BNSF could test a new technology was arbitrary and capricious. Agreeing with BNSF, we grant review, vacate, and remand.
No. 22-60217
I.
The Federal Railroad Administration Act was enacted to “promote safety in every area of railroad operations and reduce railroad-related accidents and incidents.” United Transp. Union v. Foster, 205 F.3d 851, 859 (5th Cir. 2000) (quoting 49 U.S.C. § 20101). The Act authorizes the Secretary of Transportation to “prescribe regulations and issue orders for every area of railroad safety.” 49 U.S.C. § 20103(a). The Secretary, in turn, has delegated that authority to the FRA. 49 C.F.R. § 1.89(a).
The FRA regulates how railroad tracks throughout the United States should be inspected. For decades, the FRA has required that “[e]ach inspection . . . be made on foot or by traversing the track in a vehicle at a speed that allows the person making the inspection to visually inspect the track structure .” Id. § 213.233(b). The regulations include a schedule under which such inspections must be conducted. See id. § 213.233(c). Importantly, while the regulation requires the use of visual inspections, it does not forbid the additional use of other types of inspections. “Railroads are free to supplement these minimum visual inspection requirements with automated technologies and other tools.” 49 C.F.R. § 213.233(b).
This case centers on a new technology called “Automated Track Inspection,” or “ATI.” As reported by BNSF, ATI employs a device on an unmanned train car that “travels the rails” and “uses lasers and sensors to identify internal defects and other flaws in the rails invisible to the human eye.” Then, it “collect[s] and process[es] enormous amounts of raw data and send[s] reports to rail inspectors in real time, enabling railroads to predict stretches of track that might need maintenance before a deficiency grows into a defect.”
BNSF points to ongoing studies suggesting that ATI has at least four benefits over visual inspection alone. First, ATI finds significantly more defects—according to observation by BNSF, manual inspections detected
No. 22-60217
0.01 defects per 100 miles compared to 4.54 using ATI technology. Second, ATI allows inspectors to identify and follow patterns or warning signs that may lead to a defect instead of identifying it post-formation. That shift from reactive identification to proactive predictions “enables a railroad to redeploy its track inspectors to perform inspections for developing issues in areas specifically identified by ATI.” In other words, visual inspections can be used more strategically. Third, the ATI operates without manpower, which leads to fewer employees’ walking down the tracks, reducing the risk of on-track injuries. Finally, an increased rate of efficiency in defect identification leads to increased railroad operational efficiency, given that fewer trains are delayed on account of track inspections and service interruptions.
BNSF began testing ATI in 2014. As part of those tests, BNSF in 2018 petitioned the FRA for a waiver of its visual-inspection responsibilities, but only in certain geographical territories (“Waiver Request #1”). Specifically , BNSF asked the FRA to waive the scheduling requirements for visual inspections in those territories. BNSF planned to continue using visual inspections, but only to supplement ATI. It intended to use those inspections strategically to target areas of track that the ATI-collected data indicated could be prone to defects. 83 Fed. Reg. 55,449, 55,450 (Nov. 5, 2018).
The FRA has the authority to waive its visual-inspection requirements “if such waiver or suspension is in the public interest and consistent with railroad safety.” 49 U.S.C. § 20103(d)(1). Applying those standards, the FRA approved the waiver in November 2018 for the Powder River territory. 1 The test program was a success—the FRA found that ATI identified two hundred defects for every one identified by visual inspection, improved
1
The Powder River territory covers “approximately 1,348 miles of main and siding tracks from Lincoln, Nebraska and Donkey Creek, Wyoming and back to Lincoln, Nebraska.” 83 Fed. Reg. at 55,449.
Case: 22-60217 Document: 00516677506 Page: 4 Date Filed: 03/15/2023
No. 22-60217
the efficiency of the strategically employed visual inspections, and decreased the number of workers on the tracks.
So, in July 2020, BNSF applied for another waiver (“Waiver Request #2”). BNSF proposed gradual implementation of the ATI Program through its network. It planned to introduce ATI into a new territory only when that territory had achieved a sufficiently low defect rate. Again, BNSF planned to use ATI with visual inspections as a strategically employed supplement.
The FRA approved the request to exempt BNSF from the schedule laid out in 49 C.F.R. § 213.233. That exemption was limited to two territories : the Powder River territory and the Southern Transcon route. 2 The FRA concluded that “unrestrained system-wide implementation” was not “appropriate at this point.” But as part of the waiver, the FRA named “specific conditions, which if met, will allow BNSF to expand implementation of the relief in a consistent and safe manner.” Specifically “contingent on successful implementation [of the ATI Program] on the Powder River and Southern Transcon Territories,” BNSF could petition “to include other territories in the waiver.”
Again, the implementation was a success: The defect rate decreased, the number of employees on the track decreased, and the efficiency of the railroad increased. So, in June 2021, the BNSF asked for a third waiver expansion to implement use of ATI in the Northern Transcon territory and the Orin Subdivision (“Waiver Request #3”). 3 BNSF contended that “there
2
The Powder River territory covered the same territory as the test program, and the Southern Transcon route was a “4,635-mile route that runs from Chicago to Los Angeles and back.”
3
According to BNSF’s briefing, the Northern Transcon territory is “a 4,322-mile track that runs from Chicago to Seattle and back,” and the Orin Subdivision is “a 395-mile track in Wyoming that connects parts of the Powder River territory but was not included in the original waiver.”
No. 22-60217
[were] no conditions present on either territory that would prevent the successful implementation” of ATI and that the new territories “would be subject to all the conditions, requirements, and limitations” contained in the original waiver.
The FRA took several months to rule on the request, and in the interim, BNSF submitted more data showing continued increases in safety and defect identification. Yet on March 21, 2022, the FRA denied the waiver, stating, [T]he Railroad Safety Advisory Committee (RSAC) is currently tasked to develop a consensus recommendation for incorporating ATI technology into the applicable regulatory framework . . . .
Free access — add to your briefcase to read the full text and ask questions with AI
62 F.4th 905 (BNSF Railway v. FRA) — published by Counsel Stack Legal Research, free access to 12M+ legal documents.